Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BALFHB-WL-04D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of just 1.5 dB. It operates b/w 862 MHz and 928 MHz, making it ideal for high-frequency applications. With a compact size of 2.15 x 1.88 x 0.68 mm, it withstands temperatures from -40 °C to +105 °C.
Median Price
$0.378
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Newark
1+ parts
$0.525
100+ parts
$0.439
1k+ parts
$0.387
10k+ parts
$0.350
Mouser Electronics
$0.720
$0.345
$0.248
$0.202
DigiKey
$0.810
$0.386
$0.283
-
Element14
$1.050
$0.736
$0.450
$0.419
Verical
$0.385
$0.316
Rochester
$0.342
$0.284
$0.253
Avnet
Arrow
$0.204
Future Electronics
$0.199
Chip1Stop
$0.242
Farnell
$0.372
$0.329
Vyrian
$0.206
Digiode
$0.570
TME
$0.267
IBS Electronics
$0.262
Anansix
Corphita
$0.540
Continental Prestige Electronics
$1.080
$0.457
Northwest PG Solutions
Eastek
$0.340
GreenTree Electronics
Native Components
A low insertion loss of 1.5 dB ensures efficient signal transmission, making this RF transformer ideal for high-performance applications.
The TR packing method contributes to ease of integration into various electronic systems, facilitating streamlined manufacturing processes.
With a maximum operating temperature of 105 °C, this transformer is suited for use in environments with high thermal demands.
The minimum cutoff frequency of 862 GHz allows for operation in high-frequency applications, providing versatility in varying circuit designs.
Operating down to -40 °C ensures reliability in extreme conditions, making this product suitable for a range of outdoor and harsh environments.
The compact height of 0.68 mm allows for space-saving designs in tight layouts, making it perfect for modern electronics.
A width of 1.88 mm further aids in minimizing board space while maintaining performance integrity.
A maximum cutoff frequency of 928 MHz makes this RF transformer suitable for a variety of communication and RF applications.
As an RF transformer, it is specifically designed for radio frequency applications, ensuring enhanced performance and reliability.
The surface mount design simplifies PCB assembly processes, promoting faster production and reducing costs.
The overall compact length of 2.15 mm allows for flexible placement options on printed circuit boards.
RF Transformers BALFHB-WL-04D3 attributes and parameters. Explore more RF Transformers devices from STMicroelectronics
Additional Features:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
Insertion Loss:
Length:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Transformer Type:
Width:
BALFHB-WL-04D3 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Eic Semiconductor
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
TC1-1-13M+
Mini-circuits
Mini-circuits TC1-1-13M+ RF Transformer has 0.25W power rating, 3dB insertion loss, and max DC unbalance current of 30mA. Ideal for signal applications with a min cutoff frequency of 4.5GHz and operating temp range from -40 to 85°C.
HHM1589E1
TDK
TDK's HHM1589E1 RF Transformer has 1.5 dB insertion loss, operates b/w -40 to 85°C, with cutoff frequencies ranging from 350 GHz to 470 MHz. Ideal for surface mount applications in RF circuits due to its compact L2.0xB1.25xH0.95 (mm) dimensions and reel packing method.
NCR2-113+
NCR2-113+ by Mini-circuits is an RF transformer with 2.7 dB insertion loss, operating temperature range of -40 to 85 °C, and cutoff frequency from 3.5 GHz to 11 GHz. Ideal for surface mount applications in RF circuits due to compact dimensions of L2.49xB2.01xH0.89 mm and TR packing method.
LDB212G4010C-001
Murata Manufacturing
LDB212G4010C-001 by Murata is a RF transformer with 1 dB insertion loss, operating b/w -40 to 85°C. It has dimensions of 2.0x1.25x0.95 mm and cutoff frequencies ranging from 2300 MHz to 2500 GHz. Ideal for surface mount applications in various RF circuits due to its compact size and high-frequency capabilities.
BALF-CC26-05D3
STMicroelectronics
STMicroelectronics' BALF-CC26-05D3 RF Transformer features 1.5 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in temperature range of -40 to 105°C.
PWB-16-BLB
Coilcraft
Coilcraft's PWB-16-BLB RF Transformer offers low insertion loss of 0.3 dB, inductance of 75 uH, and a max cutoff frequency of 90 MHz. Ideal for surface mount applications in RF circuits operating b/w -40 to 85°C with dimensions L6.48xB7.2xH4.45 mm.
ETC4-1-2TR
Tyco Electronics M/a-com
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC4-1-2; Minimum Cutoff Frequency: 2 GHz; Width: 2.79 mm; Additional Features: IMPEDANCE RATIO IS 1:4;
0915BM15A0001E
Johanson Technology
Johanson Technology's 0915BM15A0001E RF Transformer has 2 dB insertion loss, operates b/w -40 to 105 °C, with cutoff frequency range of 902-928 MHz. Ideal for surface mount applications in RF circuits due to its compact size and high temperature tolerance.
1812WBT-5LC
1812WBT-5LC by Coilcraft is an RF Transformer with 1.5 dB Insertion Loss, 0.09 uH Primary Inductance, and a Max Cutoff Frequency of 645 MHz. Ideal for high-frequency applications in electronics requiring precise signal transformation and low loss transmission.
ETC1-1T-5TR
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC1-1T-5; Minimum Operating Temperature: -40 Cel; Width: 2.79 mm; Packing Method: TAPE & REEL;
BALF-NRF01J5
BALF-NRF01J5 by STMicroelectronics is a compact RF transformer ideal for wireless applications. It features an insertion loss of 2.4 dB, operates b/w -40 °C to 85 °C, and covers frequencies from 2400 MHz to 2540 MHz. Its surface mount design ensures easy integration into devices.
HHM1589B1
TDK's HHM1589B1 RF Transformer offers low insertion loss of 1.4 dB, with a wide operating temperature range from -40°C to 85°C. This surface mount transformer has dimensions of L2.0xB1.25xH0.95 (mm) and is ideal for applications requiring high-frequency signal conversion up to 710 MHz, such as in RF communication systems or wireless devices.
TC1-1-13M-34+
Mini-circuits TC1-1-13M-34+ RF Transformer features 1.5 dB Insertion Loss, 47 GHz Min Cutoff Freq, and 1400 MHz Max Cutoff Freq. Ideal for RF applications requiring Surface mounting with TR packing method in a compact design suitable for temperatures ranging from -40 to 85°C.
BALF-SPI-01D3
BALF-SPI-01D3 by STMicroelectronics is an RF transformer with -2 dB insertion loss, 779 GHz min cutoff frequency, and 956 MHz max cutoff frequency. It is used in applications requiring surface mount transformers for RF signal processing at temperatures ranging from -40 to 85°C.
ETC1-1-13
ETC1-1-13 RF Transformer by Tyco Electronics M/a-com features 3.5 dB insertion loss, 4.5 GHz min cutoff frequency, and 3000 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits, it operates b/w -40°C to 85°C and comes in tape & reel packaging.
1720BL15B0050
1720BL15B0050 by Johanson Technology is an RF transformer with insertion loss of 1.5 dB, operating temperature range from -40 to 85°C, and cutoff frequency ranging from 625 GHz to 2815 MHz. This surface mount transformer is ideal for applications requiring precise RF signal transformation in compact spaces.
TC1-1T
The Mini-circuits TC1-1T RF Transformer has a power rating of 0.25W, insertion loss of 3dB, and max cutoff frequency of 500MHz. Ideal for power applications, it operates b/w -40 to 85°C temperatures and features a 1:1 turns ratio. This surface mount transformer is suitable for frequencies ranging from 400KHz to 500MHz.
TT1-6-KK81
The Mini-circuits TT1-6-KK81 RF Transformer features 3 dB insertion loss, 0.004 GHz min cutoff frequency, and 300 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with a turns ratio of 1:1.
617DB-1018
Toko
The Toko 617DB-1018 RF Transformer has 3 dB insertion loss, with dimensions of L4.4xB3.8xH3.2 (mm) and a min cutoff frequency of 2 GHz. Ideal for applications requiring surface mount RF transformers with a max cutoff frequency of 2000 MHz and a turns ratio of 1:1.
1812WBT-3LC
1812WBT-3LC by Coilcraft is an RF Transformer with 1 dB Insertion Loss, 1.25 uH Inductance, and operates b/w -40 to 85°C. Ideal for applications requiring a min cutoff frequency of 4 GHz, max cutoff frequency of 200 MHz, and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BALF-112X-01D3
STMicroelectronics' BALF-112X-01D3 RF Transformer offers -2.8 dB insertion loss, 866 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
BALF-112X-02D3
STMicroelectronics' BALF-112X-02D3 RF Transformer offers -1.9 dB insertion loss, 431 GHz min cutoff frequency, and 436 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
BALF-SPI2-01D3
STMicroelectronics' BALF-SPI2-01D3 RF Transformer has 2.1 dB insertion loss, operates b/w -40 to 105°C, with a cutoff frequency range of 860-930 MHz. Ideal for surface mount applications in RF circuits for various wireless communication devices.
BALF-NRG-01D3
STMicroelectronics' BALF-NRG-01D3 RF Transformer has -1.1 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in temperature range of -40 to 105°C.
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1.45 mm; Length: 2 mm; Maximum Operating Temperature: 85 Cel; Minimum Cutoff Frequency: 779 GHz;
BALF-SPI2-02D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Operating Temperature: 105 Cel; Packing Method: TR; JESD-609 Code: e1;
BALF-SPI-02D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Width: 1.45 mm; Insertion Loss: -3.2 dB;
BALF-NRF01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1 mm; Minimum Cutoff Frequency: 2400 GHz; Length: 1.5 mm; Height: .63 mm;
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Length: 1.375 mm; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel;
BALF-NRG-02J5
RF TRANSFORMER;
BALF-NRF01E3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: .48 mm; Maximum Cutoff Frequency: 2540 MHz; Maximum Operating Temperature: 105 Cel; Insertion Loss: 2.7 dB;
BALFHB-WL-03D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Length: 2.15 mm; Minimum Operating Temperature: -40 Cel; Maximum Cutoff Frequency: 928 MHz;
BALFHB-WL-05D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Insertion Loss: 1.4 dB; Maximum Operating Temperature: 105 Cel; Maximum Cutoff Frequency: 928 MHz; Length: 2.15 mm;
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel; Length: 1.485 mm; Maximum Operating Temperature: 105 Cel;
BALFHB-WL-06D3
STMicroelectronics' BALFHB-WL-06D3 RF Transformer features 0.85 dB insertion loss, 862 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with a temperature range of -40 to 105 °C.
BALF-ATM-01E3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 105 Cel; Maximum Cutoff Frequency: 2500 MHz; Minimum Cutoff Frequency: 2400 GHz; Minimum Operating Temperature: -40 Cel;
BALFLB-WL-07D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 2.15 mm; Maximum Cutoff Frequency: 510 MHz; Minimum Operating Temperature: -40 Cel; Insertion Loss: 2.15 dB;
BALFHB-WL-01D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Minimum Cutoff Frequency: 862 GHz; Minimum Operating Temperature: -40 Cel; Width: 1.88 mm;
BALFLB-WL-08D3
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Insertion Loss: 2.2 dB; Maximum Cutoff Frequency: 510 MHz; Minimum Cutoff Frequency: 470 GHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved