Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Dimensions: L3.81XB2.79XH3.81 (mm); Insertion Loss: 2 dB; Length: 3.81 mm;
Median Price
$3.040
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$2.483
1k+ parts
$2.236
10k+ parts
$2.098
Mouser Electronics
$2.490
$2.240
$2.150
Nova Conductors
$1.990
-
Aztec Data Supply Inc.
$1.832
Continental Prestige Electronics
$1.950
Argo Parts USA
Advanced Electronics
$2.030
Perfect Parts
RF Transformers ETC1-1T-5TR attributes and parameters. Explore more RF Transformers devices from M/a-com Technology Solutions
Additional Features:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
Insertion Loss:
Length:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
ETC1-1T-5TR Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
MACOM designs and manufactures high-performance semiconductor products for the Telecommunications, Industrial and Defense and Datacenter industries. MACOM services over 6,000 customers annually with a broad product portfolio that incorporates RF, Microwave, Analog and Mixed Signal and Optical semiconductor technologies. MACOM has achieved certification to the IATF16949 automotive standard, the ISO9001 international quality standard and the ISO14001 environmental management standard. MACOM has more than 70 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operates facilities throughout the United States, Europe, and Asia.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
STMicroelectronics
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
PA0908NL
Pulse Electronics
PA0908NL by Pulse Electronics is an RF Transformer with inductance of 216uH, dimensions L29.46xB25.4xH10.2 (mm), and max cutoff frequency of 0.7 MHz. Ideal for applications requiring surface mounting feature, it operates b/w -40 to 125 °C and has a min cutoff frequency of 0.2 GHz.
HHM1520A2
TDK
The TDK HHM1520A2 RF Transformer has 1 dB insertion loss, operates b/w -40 to 85°C, and supports frequencies from 2300 MHz to 2500 MHz. Ideal for surface mount applications in RF circuits due to its compact dimensions of L2xB1.25xH0.95 mm on reel packaging.
WB1010-SMLB
Coilcraft
WB1010-SMLB by Coilcraft is a RF transformer with an inductance of 780 uH. It has dimensions of L8.26XB7.24XH5.72 (mm) and can operate at temperatures ranging from -40 to 85 °C. This surface mount transformer is commonly used in RF applications with a cutoff frequency range of 0.005 GHz to 100 MHz.
PCT-27
Stancor Products
The Stancor Products PCT-27 RF Transformer has a max operating temp of 105°C, min cutoff freq of 0.0003 GHz, and through-hole mounting feature. Ideal for applications requiring a transformer with a turns ratio of 2:1:1, such as in RF circuits for signal conversion and amplification.
SWB3010-SMLB
Coilcraft's SWB3010-SMLB RF Transformer offers 780uH inductance, 100MHz max cutoff frequency, and -40 to 85°C operating range. Ideal for surface mount applications in RF circuits for signal transformation and filtering.
2450BM15A0002E
Johanson Technology
2450BM15A0002E by Johanson Technology is an RF Transformer with 1.7 dB Insertion Loss, operating b/w -40 to 125°C. With dimensions of L2.01xB1.24xH0.71 mm, it has a frequency range from 2400 GHz to 2500 MHz, suitable for surface mount applications in RF circuits.
ADT1-1WT
Mini-circuits
The Mini-circuits ADT1-1WT RF Transformer has a power rating of 0.5W, insertion loss of 3dB, and max DC unbalance current of 30mA. Ideal for matching applications with frequency range from 400KHz to 800MHz. Compact dimensions L7.87xB5.59xH2.84 (mm) make it suitable for surface mount installations in various RF systems.
MABAES0061
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 2.7 mm; Dimensions: L3.81XB2.79XH3.8 (mm); Maximum Operating Temperature: 85 Cel; Length: 3.81 mm;
BAL-2690D3U
STMicroelectronics' BAL-2690D3U RF Transformer has 1.1 dB insertion loss, operates b/w -40 °C to 85°C, with cutoff frequencies of 2402 GHz to 2480 MHz. Ideal for surface mount applications in RF circuits for signal transformation and impedance matching.
PWB2010LC
The Coilcraft PWB2010LC RF Transformer has a power rating of 0.25W, insertion loss of 0.2dB, and primary inductance of 780uH. It is used for signal applications with a max operating temperature of 85°C and min cutoff frequency of 0.0035GHz.
PWB2010-1LB
Coilcraft's PWB2010-1LB RF Transformer offers low insertion loss of 0.2 dB and inductance of 95 uH. With a max cutoff frequency of 250 MHz, it is ideal for RF applications requiring surface mounting method. Operating temperature ranges from -40 to 85 °C, making it suitable for various electronic devices.
TC1-1T+
TC1-1T+ by Mini-circuits is a RF transformer with 0.25W power rating, 3dB insertion loss, and 1.5GHz min cutoff frequency. Ideal for signal applications, it operates b/w -40 to 85°C temperatures and has dimensions of L3.81xB3.81xH4.06 mm for surface mounting method.
WBC1-1TLC
Coilcraft's WBC1-1TLC RF Transformer offers 0.25W power rating, 300V isolation voltage, and 0.58dB insertion loss. Ideal for isolation applications with inductance of 9.5uH and dimensions of L4.45xB4.19xH3.05mm for surface mounting method.
HHM1711Q1
TDK's HHM1711Q1 RF Transformer features 1 dB insertion loss, 2300 GHz min cutoff frequency, and 3800 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with operating temperatures ranging from -40 to 85°C.
MABACT0059
Tyco Electronics M/a-com
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: MABACT0059; Length: 3.81 mm; Packing Method: TR; Maximum Operating Temperature: 85 Cel;
1812WBT-2LC
1812WBT-2LC by Coilcraft is an RF Transformer with 1 dB Insertion Loss, 5.3 uH Primary Inductance, and 0.8 GHz Min Cutoff Frequency. Ideal for surface mount applications in RF circuits operating b/w -40 to 85 °C, offering precise signal transformation capabilities.
WB3010-SMLD
Coilcraft's WB3010-SMLD RF Transformer offers 780uH inductance, operates b/w -40 to 85°C, with a frequency range of 0.005 GHz to 100 MHz. Ideal for surface mount applications in RF circuits.
BALF-SPI2-02D3
STMicroelectronics' BALF-SPI2-02D3 RF Transformer has 3.6 dB Insertion Loss, operates b/w -40°C to 105°C, and features Tin/Silver/Copper terminal finish. Ideal for surface mount applications in various RF circuits due to its compact size of 1.6mm x 2.15mm x 0.68mm.
Z9314-ALC
Coilcraft's Z9314-ALC RF Transformer offers 1.1 dB insertion loss, 4.5 uH inductance, and a max cutoff frequency of 1700 MHz. Ideal for surface mount applications in RF circuits with temperatures ranging from -40 to 85 °C.
BALF-NRF01E3
BALF-NRF01E3 by STMicroelectronics is a compact RF transformer ideal for wireless applications. It features an insertion loss of 2.7 dB, operates b/w 2400 MHz and 2540 MHz, and withstands temperatures from -40 °C to 105 °C. Its surface mount design ensures easy integration into devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ETC1-1-13TR
ETC1-1-13TR by M/a-com Technology Solutions is a RF Transformer with 0.25W power rating, 3.5dB insertion loss, and 30mA max DC unbalance current. It is used for matching applications in RF circuits, with dimensions of L3.81xB2.79xH2.79mm and operating temperatures ranging from -55 to 85°C.
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC1-1-13; Minimum Operating Temperature: -40 Cel; Maximum Cutoff Frequency: 3000 MHz; Width: 2.79 mm;
ETC1-1-13
ETC1-1-13 RF Transformer by Tyco Electronics M/a-com features 3.5 dB insertion loss, 4.5 GHz min cutoff frequency, and 3000 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits, it operates b/w -40°C to 85°C and comes in tape & reel packaging.
ETC1-1T-2TR
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC1-1T-2; Height: 3.8 mm; Turns Ratio (Np:Ns): 1:1; Maximum Operating Temperature: 85 Cel;
ETC1-1T-2TR RF Transformer by M/a-com features 1.5 dB insertion loss, 0.1 GHz min cutoff frequency, and 200 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with a turns ratio of 1:1, dimensions L3.81xB2.79xH2.79 (mm), and operating temperatures from -40 to 85°C.
ETC1-1T-5TR
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC1-1T-5; Minimum Operating Temperature: -40 Cel; Width: 2.79 mm; Packing Method: TAPE & REEL;
ETC1-1T-5
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC1-1T-5; Minimum Cutoff Frequency: 2 GHz; Minimum Operating Temperature: -20 Cel; Turns Ratio (Np:Ns): 1:1;
ETC1-1-10TR
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: ETC1-1-10; Length: 3.81 mm; Additional Features: IMPEDANCE RATIO IS 1:1; Height: 3.8 mm;
ETC1-1TTR
TE Connectivity
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Width: 2.79 mm; Maximum Operating Frequency: 200000 KHz; Minimum Operating Frequency: 3000 KHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved