Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' WT12-A-AI3 is a telecom IC with 31 terminals, CMOS technology, and 3 Mbps data rate. It operates in industrial temperature range (-40 to 85°C) and requires a nominal voltage of 3.3V. This surface-mount rectangular package (14x25 mm) is ideal for telecom interface applications.
Median Price
$14.496
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
ABC Electronics Ltd.
Velocity Electronics
AZTECH Wire
$1.700
$1.630
$1.600
$1.570
Corohmni
$11.203
Aztec Data Supply Inc.
$11.470
Continental Prestige Electronics
$14.206
Bastille Electronics
$14.500
$13.775
$12.905
Advanced Electronics
$14.900
$14.155
Ampacity Inc.
$259.000
Semicontronic
$554.000
$540.150
$537.380
Argo Parts USA
Corphita
This product can be easily mounted on a circuit board, making it convenient for assembly and reducing manufacturing time.
The rectangular shape of the package allows for efficient use of board space, enabling more components to be placed in a limited area.
With a high number of terminals, this product can support a wide range of connections and functionalities, making it versatile for different applications.
The high maximum operating temperature makes this product suitable for industrial environments where temperature variations are common.
Operates on a common supply voltage, making it compatible with standard power sources and reducing the need for additional voltage conversion circuitry.
With a high data rate of 3 Mbps, this product is capable of handling large amounts of data quickly and efficiently, ideal for high-speed communication applications.
Other Function Telecom Interface ICs WT12-A-AI3 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Data Rate:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
WT12-A-AI3 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 12/Dec/2019
PCN Packaging - Multi Devices 15/Jan/2019
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
RS9116W-DB00-CC1
Redpine Signals
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 107; Package Code: LGA; Package Shape: RECTANGULAR;
ISP1507-AX-RS
Insight Sip
ISP1507-AX-RS by Insight Sip is a telecom IC with 62 terminals, operating at -40 to 85°C. It has a data rate of 2 Mbps and runs on a 3V supply voltage. Ideal for industrial applications requiring high-speed communication in compact form factors.
TM1062DVA1
Pulse Electronics
TM1062DVA1 by Pulse Electronics is a 28-terminal hybrid IC with 5V supply, suitable for telecom circuits. It operates b/w -55°C to 125°C, MIL grade, in a small outline package. Features Gull Wing terminals on a rectangular body made of plastic/epoxy.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
F2480NBGI
Renesas Electronics
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
DWM1000
Qorvo
The Qorvo DWM1000 is a surface-mount telecom IC with 24 terminals, operating temperature range of -40 to 85°C. It features a data rate of 6.8 Mbps and CMOS technology, suitable for industrial applications requiring precise wireless communication in compact spaces.
ODIN-W260-00B-00
U-blox Ag
TELECOM CIRCUIT; Peak Reflow Temperature (C): 245; Moisture Sensitivity Level (MSL): 4;
ATECC508A-MAHDA-S
Atmel
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR;
ODIN-W262-06B
Other Telecom ICs;
CYBLE-222014-01
Infineon Technologies
CYBLE-222014-01 by Infineon Technologies is a surface mount telecom IC with 22 terminals. It operates at temperatures ranging from -40 to 85 °C and has a seated height of 1.9 mm. This IC is commonly used in industrial applications requiring a nominal voltage of 3.3 V.
L80-M39
Quectel Wireless Solutions
L80-M39 by Quectel is a telecom interface IC with 1 function. It has a square package shape, 12 terminals, and a max operating temperature of 85°C. This IC is commonly used in industrial applications requiring reliable telecom circuitry.
BGT24LTR11N16E6327XTSA1
BGT24LTR11N16E6327XTSA1 by Infineon is a Telecom IC with 16 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and a terminal pitch of 0.5mm. This chip carrier is ideal for telecom circuit applications due to its very thin profile and industrial temperature grade suitability.
MRF39RAT-I/LY
MRF39RAT-I/LY by Microchip is a telecom IC with 24 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use at 3.3V supply voltage. With a compact size of 5x5mm and terminal pitch of 0.65mm, it's ideal for telecom interface applications requiring surface mount technology.
NINA-B301-00B
TELECOM CIRCUIT;
TLE8457BSJXUMA1
TLE8457BSJXUMA1 by Infineon is a BICMOS technology telecom IC with 8 terminals in a small outline package. It operates at a nominal voltage of 8V and has a terminal pitch of 1.27mm. This AEC-Q100 screened IC is ideal for telecom circuit applications due to its compact size and gull wing terminal form.
451-00002
Laird Technologies
Laird Technologies' 451-00002 is a surface mount telecom IC with 71 terminals. Operating b/w -40 to 85°C, it has a seated height of 2.35mm and nominal voltage of 3.3V. Ideal for telecom circuits, it offers data rates up to 2 Mbps in microelectronic assemblies.
NRF52840-QIAA-R
Nordic Semiconductor Asa
NRF52840-QIAA-R by Nordic Semiconductor Asa is a telecom IC with 73 terminals, operating from -40 to 85°C. It has a nominal voltage of 3V and terminal pitch of 0.5mm. This square-shaped chip carrier is suitable for industrial applications requiring a very thin profile.
CY7B933-JXC
Infineon Technologies' CY7B933-JXC is a BICMOS technology telecom IC with 28 terminals in a square chip carrier package. Operating at 5V, it supports data rates up to 400 Mbps and draws a max supply current of 155mA. Ideal for telecom circuits, this IC has a temperature range of 0-70°C and is surface mountable.
SN65LVCP114ZJA
Texas Instruments
SN65LVCP114ZJA by Texas Instruments is a telecom interface IC with 4 functions, operating at 2.5/3.3V. It features a grid array package style with 167 terminals and supports data rates up to 14200 Mbps. Ideal for industrial applications requiring high-speed communication in harsh environments.
SX1272IMLTRT
Semtech
Semtech's SX1272IMLTRT is a telecom IC with 28 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 3.3V. Ideal for industrial applications requiring very thin profile components and matte tin terminal finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
WT12-A-AI4
Silicon Labs
Silicon Labs' WT12-A-AI4 is a RECTANGULAR MICROELECTRONIC ASSEMBLY with 31 terminals. Operating from -40 to 85 °C, it's ideal for INDUSTRIAL applications requiring TELECOM CIRCUIT ICs at 3.3 V supply voltage and 1.5 mm terminal pitch.
WT12-A-AI5
The Silicon Labs WT12-A-AI5 is a telecom IC with 31 terminals, operating at -40 to 85°C. With a data rate of 2.1781 Mbps and supply voltage of 3.3V, it's ideal for industrial applications requiring high-speed communication in compact designs. This surface-mount IC is designed for telecom circuits, offering reliable performance in microelectronic assemblies.
WT12-A-AI4C
WT12-A-AI4C by Silicon Labs is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a data rate of 3 Mbps and operates at a nominal voltage of 3.3 V. This MICROELECTRONIC ASSEMBLY is ideal for telecom circuit applications due to its compact size and high-speed data capabilities.
WT12-A-HCI21
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
WT12-A-3
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; Length: 25.6 mm;
WT12-A-C
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; JESD-30 Code: R-XXMA-N31;
WT12-A-AI5001
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Code: XMA; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved