Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8410AD-A-IS by Silicon Labs is a 16-terminal interface IC with CMOS technology. It features a small outline package, Gull Wing terminals, and automotive temperature grade. Ideal for applications requiring surface mount rectangular ICs with dual terminal positions.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
AZTECH Wire
$0.430
$0.410
$0.400
Advanced Electronics
$4.783
Corohmni
$12.695
Continental Prestige Electronics
Argo Parts USA
Corphita
Aranea Global
The use of plastic/epoxy as the package body material provides durability and protection to the internal components of the interface IC, making it reliable for various applications.
Being surface mountable allows for easy and efficient installation on circuit boards, saving space and reducing assembly time.
The rectangular package shape offers versatility in mounting options and compatibility with standard PCB layouts.
With 16 terminals, this interface IC can accommodate a variety of connections and functionalities, making it suitable for complex circuit designs.
The small outline package style saves space on the PCB, ideal for applications with limited board real estate.
The low seated height allows for a compact overall design and facilitates integration into thin electronic devices.
The narrow width of the interface IC makes it easy to fit into tight spaces on the circuit board, enhancing design flexibility.
The moderate length of the IC provides a balanced form factor, suitable for various applications without being too bulky.
The automotive temperature grade ensures that the interface IC can withstand harsh operating conditions, making it suitable for automotive applications.
The CMOS technology used in this IC offers low power consumption and high noise immunity, enhancing performance and efficiency.
The gull wing terminal form provides mechanical strength and ease of soldering during assembly, ensuring reliable connections.
The tight terminal pitch allows for high-density mounting on the PCB, enabling more functionality in a smaller footprint.
With MSL 2A rating, the IC has a moderate sensitivity to moisture, making it suitable for storage and operation in typical indoor environments.
As an interface circuit, this IC facilitates communication between different components or systems, making it a versatile and essential component in electronic devices.
Other Function Interface ICs SI8410AD-A-IS attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Interface IC Type:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI8410AD-A-IS Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Other - PB-1412172 17/Dec/2014
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
STMicroelectronics
EU2B-YS3203C
Idec
ROTARY SWITCH;
Sangdest Microelectronics (Nanjing)
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
SI8641EC-B-IS1R
Silicon Labs
SI8641EC-B-IS1R by Silicon Labs is a digital isolator with 4 functions. It operates at a supply voltage range of 2.375V to 5.5V and has a small outline package style. This IC is commonly used for interface applications requiring isolation in various electronic devices.
LTC6820IMS#TRPBF
Analog Devices
LTC6820IMS#TRPBF by Analog Devices is a CMOS interface IC with 16 terminals, operating from -40 to 85 °C. It has a supply voltage range of 2.7V to 5.5V and comes in a small outline package suitable for industrial applications requiring precise signal interfacing.
ADUM2402BRWZ
ADUM2402BRWZ by Analog Devices is a 16-terminal IC with supply voltage range of 2.7V to 5.5V, operating temperature from -40°C to 105°C. It features CMOS technology and matte tin terminal finish, suitable for industrial applications requiring small outline interface circuits in surface mount packages.
MAX7301AAI+T
Maxim Integrated
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
TFBS4711-TT1
Vishay Intertechnology
TFBS4711-TT1 by Vishay Intertechnology is a CMOS interface IC with 6 terminals. It operates b/w -25°C to 85°C, with supply voltage ranging from 2.4V to 5.5V. This MICROELECTRONIC ASSEMBLY is ideal for applications requiring INTERFACE CIRCUIT technology in compact spaces.
PCA9306DCTTG4
Texas Instruments
PCA9306DCTTG4 by Texas Instruments is a dual-function interface IC with open-drain output. It operates b/w -40 to 85°C, with a supply voltage range of 0-5.5V. Ideal for industrial applications requiring level shifting and voltage translation in compact designs.
ISO7740FDBQ
ISO7740FDBQ by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -55 to 125°C. It has a supply voltage range of 2.25-5.5V and uses CMOS technology. Ideal for military applications requiring small outline packaging and dual terminal position with nickel/palladium/gold finish.
SI8641BD-B-IS
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8641ED-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
ADUM1100BRZ
ADUM1100BRZ by Analog Devices is an 8-terminal interface IC with a supply voltage range of 3V to 5.5V. It operates in industrial temperatures (-40°C to 105°C) and features CMOS technology. This small outline package is surface-mountable and suitable for various interface circuit applications.
ISO7741QDWRQ1
ISO7741QDWRQ1 by Texas Instruments is a CMOS interface IC with 4 functions, suitable for automotive applications. It operates b/w -40 to 125°C, with supply voltage ranging from 2.25V to 5.5V. The package style is small outline, measuring 10.3mm x 7.5mm x 2.65mm in size and has a moisture sensitivity level of MSL2.
ISL78365ARZ-T7A
Renesas Electronics
INTERFACE CIRCUIT; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
ISO7741BDWR
ISO7741BDWR by Texas Instruments is a digital isolator with 4 channels, operating at -55 to 125°C. It features a supply voltage range of 2.25-5.5V and interface standards EIA-232/EIA-485. Ideal for military-grade applications requiring reliable signal isolation in compact spaces.
ISO6742FDWR
The Texas Instruments ISO6742FDWR is a CMOS interface IC with 4 functions, suitable for automotive applications. It operates b/w -40 to 125°C, with supply voltage ranging from 1.71V to 5.5V. This small outline package has 16 terminals and is surface mountable, making it ideal for various electronic systems.
SN6505DQDBVTQ1
SN6505DQDBVTQ1 by Texas Instruments is a small outline, low profile interface IC with 6 terminals and 1.5A output current. Operating b/w -40 to 125°C, it's AEC-Q100 compliant for automotive applications. With a supply voltage range of 2.25V to 5.5V, it's ideal for various function interface requirements in automotive electronics.
ADUM1200CRZ
ADUM1200CRZ by Analog Devices is an Interface IC with 2 functions, operating at a supply voltage range of 2.7V to 5.5V. It has a small outline package style and can withstand industrial temperature grades from -40°C to 105°C. Ideal for applications requiring reliable signal isolation in harsh environments.
ISO7231CDWRG4
ISO7231CDWRG4 by Texas Instruments is a 16-terminal IC with 3 functions, operating at -40 to 125°C. It has a CMOS technology, suitable for automotive applications with a supply voltage range of 3.3V to 5V. The package style is small outline, surface mountable and features nickel palladium gold terminal finish.
ADUM1201ARZ
ADUM1201ARZ by Analog Devices is a dual-function interface IC with 2 functions, operating at 2.7-5.5V, ideal for industrial applications. It comes in a small outline package with 8 terminals and CMOS technology, suitable for surface mount assembly up to 260°C peak reflow temperature.
ADUM4152ARIZ
ADUM4152ARIZ by Analog Devices is a 20-terminal interface IC with a supply voltage range of 3-3.6V. It operates in temperatures from -40 to 125°C, making it suitable for automotive applications. The DMOS technology and small outline package make it ideal for surface mount designs.
ADUM1201WSRZ-RL7
ADUM1201WSRZ-RL7 by Analog Devices is a dual-function interface IC with 8 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 3-5.5 V and is AEC-Q100 compliant for automotive applications. This small outline package IC features CMOS technology and matte tin terminal finish, suitable for various interface circuit requirements in automotive electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8422AB-D-ISR
SI8422AB-D-ISR by Silicon Labs is a dual-function interface IC with 8 terminals. It operates b/w -40°C to 125°C, with supply voltage ranging from 2.7V to 5.5V. This small outline package is ideal for applications requiring AEC-Q100 screening and CMOS technology.
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8422AB-D-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
SI8422AB-D-IS by Silicon Labs is a dual-function interface IC with 8 terminals. It operates b/w -40 to 125 °C and supports supply voltages from 2.7V to 5.5V. This small outline package is ideal for AEC-Q100 applications in automotive electronics.
SI8400AB-B-IS
SI8400AB-B-IS by Silicon Labs is an 8-terminal interface IC with a supply voltage range of 3-5.5V, suitable for automotive applications. It features a small outline package style, gull wing terminal form, and operates in temperatures from -40 to 125°C. Ideal for surface mount assembly with a rectangular shape and compact dimensions of 4.9mm x 3.9mm x 1.75mm.
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SI8422BB-D-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
SI8422BB-D-IS by Silicon Labs is an 8-terminal IC with dual terminal position, operating at -40 to 125 °C. It has a supply voltage range of 2.7-5.5 V and is AEC-Q100 screened. This small outline rectangular package interface circuit is ideal for automotive applications.
SI8420BB-D-IS
SI8423BB-D-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 2A;
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
SI8440BB-D-IS
SI8440BB-D-IS by Silicon Labs is a 16-terminal interface IC with CMOS technology. Its small outline package measures 7.5mm in width and 10.3mm in length, suitable for automotive applications due to its gull wing terminals and dual terminal position.
DIGITAL ISOLATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SI8421AD-D-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 2A;
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
SI8442AB-D-IS
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SI8420BB-D-ISR
SI8420BB-D-ISR by Silicon Labs is a CMOS interface IC with 8 terminals in a small outline package. It is surface mountable, suitable for automotive applications, and has a peak reflow temperature of 260°C. Ideal for various function interface needs due to its compact size and dual terminal position.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved