Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8422BB-D-IS by Silicon Labs is an 8-terminal IC with dual terminal position, operating at -40 to 125 °C. It has a supply voltage range of 2.7-5.5 V and is AEC-Q100 screened. This small outline rectangular package interface circuit is ideal for automotive applications.
Median Price
$3.301
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$3.450
$2.050
$1.930
$1.800
DigiKey
$3.510
$2.177
$1.974
$1.833
Arrow
$1.918
Verical
Digiode
$3.136
TME
$3.190
Nova Conductors
$4.022
Chip Stock
Vyrian
Corohmni
$1.553
Advanced Electronics
$1.600
$1.520
Semicontronic
$1.730
$1.687
$1.678
Ampacity Inc.
Corphita
$2.971
Continental Prestige Electronics
$3.941
Argo Parts USA
Aztec Data Supply Inc.
$12.484
S.R.D Solutions
Lixinc
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Perfect Parts
Netroflash
$3.821
$3.740
Kepictronics
Metaverse IC Inc.
Glotronic Ltd.
This material provides good durability and protection for the IC, ensuring a longer lifespan.
The surface mount feature allows for easy and efficient installation on circuit boards.
Can handle a relatively high supply voltage, suitable for a wide range of applications.
Provides multiple functions in a single IC, reducing the need for additional components.
Meets automotive industry quality standards, ensuring reliability in harsh environments.
The rectangular shape allows for efficient use of PCB space and easy alignment during assembly.
Provides multiple connection points for interfacing with other components and circuits.
The small outline package saves space on the PCB and is ideal for compact electronic devices.
Works effectively even with low supply voltage, making it versatile for various power sources.
Can operate at high temperatures without compromising performance, suitable for demanding applications.
Can withstand extremely low temperatures, making it suitable for use in cold environments.
The dual terminal position provides flexibility in PCB layout and connection options.
Low profile design saves space and allows for compact device designs.
Compact width dimension enables efficient use of PCB space and easy integration into circuits.
Compact length dimension saves space on the PCB and allows for compact device designs.
CMOS technology offers low power consumption and high noise immunity, making the IC energy-efficient and reliable.
Gull wing terminals provide secure solder connections and easy PCB assembly.
The nominal supply voltage ensures compatibility with standard power sources, making it easy to integrate into various designs.
The small terminal pitch allows for close spacing of terminals, maximizing PCB space efficiency.
Specifically designed for interfacing with other devices or circuits, making it a versatile choice for various applications.
Other Function Interface ICs SI8422BB-D-IS attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI8422BB-D-IS Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Si82xx/Si84xx/Si86xx 04/Feb/2020
PCN Other - Skyworks Acquisition 9/Jul/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Gulf Semiconductor
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Infinex
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
New Jersey Semiconductor Products
MFRC52202HN1,115
NXP Semiconductors
The NXP Semiconductors MFRC52202HN1,115 is a 32-terminal interface IC with a supply voltage range of 2.5V to 3.6V. It operates b/w -25°C to 85°C and has a compact square package style suitable for RFID applications. With surface mount capability and quad terminal position, it offers high performance in a small form factor.
SI8641BB-B-IS1R
Silicon Labs
SI8641BB-B-IS1R by Silicon Labs is a 16-terminal digital isolator with 4 functions. It operates b/w -40 to 125°C, with supply voltage ranging from 2.375V to 5.5V. Ideal for applications requiring small outline packages and surface mount technology.
ISO7721DW
ISO7721DW by Texas Instruments is a small outline interface IC with 2 channels. It operates at a temperature range of -55 to 125°C and has a max supply voltage of 5.5V. It is commonly used in military applications due to its MILITARY temperature grade.
SI8602AC-B-IS
SI8602AC-B-IS by Silicon Labs is an interface IC with 1 function, operating at a voltage range of 3-5.5V. It is suitable for automotive applications and has a small outline package style with dimensions of 4.9mm x 3.9mm.
ISO7240CDW
ISO7240CDW by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and 3.3V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has a small outline package style for surface mount applications. The IC features dual terminal position with nickel palladium gold finish, making it suitable for various interface functions in electronic systems.
ISOW7843FDWE
ISOW7843FDWE by Texas Instruments is a digital isolator with 4 channels, operating at -40 to 125°C. It features a supply voltage range of 3-5.5V and comes in a small outline package suitable for automotive applications. With CMOS technology and nickel palladium gold finish, it offers reliable isolation for various interface functions.
GTL2002DP,118
GTL2002DP,118 by NXP Semiconductors is an 8-terminal interface IC with a max supply voltage of 5.5V and min operating temp of -40°C. Its small outline package makes it ideal for industrial applications requiring dual terminal position and peak reflow at 260°C.
SI8422AB-D-IS
SI8422AB-D-IS by Silicon Labs is a dual-function interface IC with 8 terminals. It operates b/w -40 to 125 °C and supports supply voltages from 2.7V to 5.5V. This small outline package is ideal for AEC-Q100 applications in automotive electronics.
ISO7760FDBQR
ISO7760FDBQR by Texas Instruments is a 16-terminal IC with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and uses CMOS technology. Ideal for military applications requiring small outline, surface-mount interface circuits.
LTC6957IDD-2#PBF
Linear Technology
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE;
ADUM1250WSRZ-RL7
Analog Devices
ADUM1250WSRZ-RL7 by Analog Devices is an 8-terminal IC with a supply voltage range of 3V to 5.5V, operating b/w -40°C to 125°C. Ideal for automotive applications, it features CMOS technology and a small outline package style for surface mount assembly.
ISO7763FDBQ
ISO7763FDBQ by Texas Instruments is a 16-terminal IC with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and uses CMOS technology. This small outline interface circuit is ideal for military-grade applications requiring high reliability in harsh environments.
ADUM1402ARWZ
ADUM1402ARWZ by Analog Devices is a 16-terminal interface IC with 4 functions. It operates b/w -40 to 105°C, supporting EIA-232, EIA-422, and EIA-485 standards. This CMOS technology device in a small outline package is ideal for industrial applications requiring reliable signal interfacing at supply voltages ranging from 2.7V to 5.5V.
TXS0102DCTTG4
TXS0102DCTTG4 by Texas Instruments is a 2-bit interface IC with max supply voltage of 5.5V and min operating temp of -40°C. It's used in industrial applications for its 3-STATE output characteristics, small outline package style, and dual terminal position.
ISO1540D
ISO1540D by Texas Instruments is an 8-terminal interface IC with dual terminal position, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 3-5.5V. The small outline package measures 4.9mm x 3.9mm and has a max seated height of 1.75mm, making it ideal for compact designs in harsh environments.
ZIOL2401BI1R
Integrated Device Technology
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: QCCN; Package Shape: SQUARE;
SI8640BD-B-IS2R
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ISO7731FQDWRQ1
ISO7731FQDWRQ1 by Texas Instruments is an AEC-Q100 compliant interface IC with 3 functions, operating at -40 to 125°C. It has a supply voltage range of 2.25-5.5V and features a small outline package suitable for automotive applications. The CMOS technology, GULL WING terminals, and nickel/palladium/gold finish make it ideal for various automotive interface circuit designs.
ADUM5241ARZ
ADUM5241ARZ by Analog Devices is an 8-terminal interface IC with a supply voltage range of 4.5V to 5.5V, operating from -40°C to 105°C. This small outline package with dual terminals and matte tin finish is ideal for industrial applications requiring a surface-mount solution in a compact form factor.
SI8640BB-B-IS1R
SI8640BB-B-IS1R by Silicon Labs is a digital isolator with 4 functions, operating b/w -40 to 125°C. It has a supply voltage range of 2.375V to 5.5V and comes in a small outline package suitable for surface mount applications. Ideal for systems requiring signal isolation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8422AB-D-ISR
SI8422AB-D-ISR by Silicon Labs is a dual-function interface IC with 8 terminals. It operates b/w -40°C to 125°C, with supply voltage ranging from 2.7V to 5.5V. This small outline package is ideal for applications requiring AEC-Q100 screening and CMOS technology.
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
SI8400AB-B-IS
SI8400AB-B-IS by Silicon Labs is an 8-terminal interface IC with a supply voltage range of 3-5.5V, suitable for automotive applications. It features a small outline package style, gull wing terminal form, and operates in temperatures from -40 to 125°C. Ideal for surface mount assembly with a rectangular shape and compact dimensions of 4.9mm x 3.9mm x 1.75mm.
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SI8422BB-D-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
SI8420BB-D-IS
SI8423BB-D-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 2A;
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
SI8440BB-D-IS
SI8440BB-D-IS by Silicon Labs is a 16-terminal interface IC with CMOS technology. Its small outline package measures 7.5mm in width and 10.3mm in length, suitable for automotive applications due to its gull wing terminals and dual terminal position.
DIGITAL ISOLATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SI8421AD-D-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 2A;
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
SI8442AB-D-IS
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SI8420BB-D-ISR
SI8420BB-D-ISR by Silicon Labs is a CMOS interface IC with 8 terminals in a small outline package. It is surface mountable, suitable for automotive applications, and has a peak reflow temperature of 260°C. Ideal for various function interface needs due to its compact size and dual terminal position.
SI8422BB-D-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Length: 4.9 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved