Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8422AB-D-ISR by Silicon Labs is a dual-function interface IC with 8 terminals. It operates b/w -40°C to 125°C, with supply voltage ranging from 2.7V to 5.5V. This small outline package is ideal for applications requiring AEC-Q100 screening and CMOS technology.
Median Price
$1.494
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$2.330
100+ parts
$2.213
1k+ parts
10k+ parts
-
Mouser Electronics
$2.390
$1.460
$1.290
$1.210
DigiKey
$1.451
$1.331
Arrow
Verical
$1.229
Flip Electronics (Authorized)
Chip1Stop
$1.280
Rochester
$1.480
$1.230
$1.100
Digiode
$1.320
Nova Conductors
$1.339
Vyrian
TME
$1.990
Flip Electronics
ComSIT Distribution GmbH
Chip Stock
GLYN GmbH & Co. KG
LIBRA Elektronik GmbH
Bristol Electronics
Ampacity Inc.
$1.030
Semicontronic
$1.004
$0.999
Corphita
$1.251
Aranea Global
$1.312
$1.259
Continental Prestige Electronics
Argo Parts USA
Advanced Electronics
Corohmni
$2.580
Aztec Data Supply Inc.
$9.439
Kepictronics
Authorized Procurement Solutions
Futuretech Components
This material provides durability and reliability to the product.
Allows for easy and efficient installation on circuit boards.
Can handle high supply voltages, making it versatile for different applications.
Provides dual functionality in a single component, saving space and cost.
Meets automotive industry standards for quality and reliability.
Compact shape for efficient use of space on PCBs.
Provides multiple connection points for versatility in circuit configurations.
Compact design for space-constrained applications.
Can operate at low supply voltages for energy efficiency.
Can withstand high operating temperatures, suitable for various environments.
Capable of operating in extreme cold conditions.
Allows for flexibility in mounting and connections.
Low profile design for compact applications.
Compact width for space-efficient PCB layout.
Compact length for space-efficient PCB layout.
Uses CMOS technology for low power consumption and high speed operation.
Gull wing terminals for easy soldering and robust connection.
Standard supply voltage for compatibility with different systems.
Standard terminal pitch for easy integration into PCB designs.
Specifically designed for interfacing with other circuits, ensuring compatibility and functionality.
Other Function Interface ICs SI8422AB-D-ISR attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI8422AB-D-ISR Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
CRGCQ0805F10K
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
1N4148W-T
Rectron
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
SI8641ED-B-IS2R
Silicon Labs
SI8641ED-B-IS2R by Silicon Labs is a 16-terminal digital isolator with 4 functions. It operates b/w -40 to 125°C, with supply voltage range of 2.375-5.5V. Ideal for applications requiring small outline package and dual terminal position.
PCA9306DCUTG4
Texas Instruments
PCA9306DCUTG4 by Texas Instruments is an 8-terminal IC with dual functions, operating b/w -40 to 85°C. It has a supply voltage range of 1.2V to 5.5V and is ideal for industrial applications requiring interface circuitry in compact spaces due to its small outline package style.
ISO7842DWW
ISO7842DWW by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and MILITARY temperature grade. It operates b/w -55 to 125 °C with a supply voltage range of 2.25-5.5 V. Ideal for applications requiring high reliability in harsh environments.
SI8422AB-D-ISR
LTC6957IMS-3#PBF
Analog Devices
LTC6957IMS-3#PBF by Analog Devices is a CMOS interface IC with 12 terminals, operating b/w -40 to 85°C. It has a supply voltage range of 3.15V to 3.45V and comes in a small outline package suitable for industrial applications requiring precise timing and signal synchronization.
TFBS4711-TT1
Vishay Intertechnology
TFBS4711-TT1 by Vishay Intertechnology is a CMOS interface IC with 6 terminals. It operates b/w -25°C to 85°C, with supply voltage ranging from 2.4V to 5.5V. This MICROELECTRONIC ASSEMBLY is ideal for applications requiring INTERFACE CIRCUIT technology in compact spaces.
TXS0102DQMR
TXS0102DQMR by Texas Instruments is a 2-bit interface IC with 3-STATE output. It operates b/w -40 to 85°C, supports supply voltages of 1.65-5.5V, and has a terminal pitch of 0.4mm. Ideal for industrial applications requiring small outline, thin profile packages in surface mount technology.
MAX31911AUI+
Digital I/P Module; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR;
ISO7742DWR
ISO7742DWR by Texas Instruments is a 4-channel interface IC with CMOS technology. It operates b/w -55 to 125 °C and supports supply voltages from 2.25V to 5.5V. With a small outline package style, it's ideal for military-grade applications requiring high reliability in harsh environments.
ISO7240CFDWRG4
ISO7240CFDWRG4 by Texas Instruments is a digital isolator with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 3.15-3.6 V and is suitable for automotive applications due to its nickel palladium gold finish and small outline package style.
ADUM1250ARZ-RL7
ADUM1250ARZ-RL7 by Analog Devices is an 8-terminal IC with a supply voltage range of 3V to 5.5V, operating from -40°C to 105°C. It features a small outline package and CMOS technology, suitable for industrial applications requiring interface circuitry in compact designs.
PCA9306D,118
NXP Semiconductors
PCA9306D,118 by NXP Semiconductors is an Interface IC with 8 terminals. It operates b/w -40 to 85 °C and supports supply voltage range of 1.1V to 5.5V. Ideal for industrial applications requiring level shifting in a small outline package.
MAX14850ASE+T
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SI8641ED-B-ISR
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP16,.4;
MAX253CPA
MAX253CPA by Maxim Integrated is an 8-terminal IC with a supply voltage range of 4.5V to 5.5V, operating b/w 0°C to 70°C. It features a CMOS technology and is ideal for interface circuit applications due to its rectangular package shape and through-hole terminal form.
TXS0102YZPR
TXS0102YZPR by Texas Instruments is a 2-bit interface IC with max supply voltage of 5.5V and min operating temp of -40°C. It is used in industrial applications requiring 3-state output characteristics, with package style including grid array and very thin profile for space-constrained designs.
ISO7731BDWR
ISO7731BDWR by Texas Instruments is a 16-terminal interface IC with CMOS technology. It operates b/w -55 to 125°C, suitable for military-grade applications. With a supply voltage range of 2.25V to 5.5V, it offers 3 channels and is ideal for small outline packages in surface-mount designs.
SI8642BB-B-IS
SI8642BB-B-IS by Silicon Labs is a digital isolator with 4 functions. It operates at a voltage range of 2.375V to 5.5V and has a small outline package style. It is commonly used in applications requiring interface isolation, such as industrial automation and power systems.
ISO7741FEDWRQ1
ISO7741FEDWRQ1 by Texas Instruments is a 16-terminal IC with 4 functions, operating at -50 to 150°C. It has a supply voltage range of 2.25-5.5V and is AEC-Q100 compliant for automotive applications. The CMOS technology interface circuit is surface-mountable and features Gull Wing terminals, making it suitable for various automotive electronic systems.
SI8642BB-B-IS1R
SI8642BB-B-IS1R by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for surface mount applications in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8422AB-D-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
SI8422AB-D-IS by Silicon Labs is a dual-function interface IC with 8 terminals. It operates b/w -40 to 125 °C and supports supply voltages from 2.7V to 5.5V. This small outline package is ideal for AEC-Q100 applications in automotive electronics.
SI8400AB-B-IS
SI8400AB-B-IS by Silicon Labs is an 8-terminal interface IC with a supply voltage range of 3-5.5V, suitable for automotive applications. It features a small outline package style, gull wing terminal form, and operates in temperatures from -40 to 125°C. Ideal for surface mount assembly with a rectangular shape and compact dimensions of 4.9mm x 3.9mm x 1.75mm.
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SI8422BB-D-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
SI8422BB-D-IS by Silicon Labs is an 8-terminal IC with dual terminal position, operating at -40 to 125 °C. It has a supply voltage range of 2.7-5.5 V and is AEC-Q100 screened. This small outline rectangular package interface circuit is ideal for automotive applications.
SI8420BB-D-IS
SI8423BB-D-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 2A;
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
SI8440BB-D-IS
SI8440BB-D-IS by Silicon Labs is a 16-terminal interface IC with CMOS technology. Its small outline package measures 7.5mm in width and 10.3mm in length, suitable for automotive applications due to its gull wing terminals and dual terminal position.
DIGITAL ISOLATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SI8421AD-D-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 2A;
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
SI8442AB-D-IS
SI8420BB-D-ISR
SI8420BB-D-ISR by Silicon Labs is a CMOS interface IC with 8 terminals in a small outline package. It is surface mountable, suitable for automotive applications, and has a peak reflow temperature of 260°C. Ideal for various function interface needs due to its compact size and dual terminal position.
SI8422AD-D-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved