Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8642BA-B-IU by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It is used in applications requiring surface mount technology for small outline packages with dual terminals.
Median Price
$2.864
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$2.100
100+ parts
$1.867
1k+ parts
$1.776
10k+ parts
-
Arrow
$2.447
$1.811
Mouser Electronics
$3.520
$2.070
$1.990
$1.880
DigiKey
$2.194
$1.992
$1.851
Verical
Richardson RFPD
Chip1Stop
$3.280
Digiode
$1.995
Nova Conductors
$2.180
Vyrian
Chip Stock
Kiltronic GmbH
Semicontronic
$1.780
$1.736
$1.727
Corphita
$1.890
Argo Parts USA
Continental Prestige Electronics
$2.136
Ampacity Inc.
$3.890
Aztec Data Supply Inc.
$7.848
Corohmni
$10.464
Advanced Electronics
$14.381
$13.662
Perfect Parts
Lixinc
Futuretech Components
PLASTIC/EPOXY material provides a good balance of durability and cost-effectiveness, making this product a reliable option for various applications.
Surface mount capability allows for easy installation and integration in modern electronic manufacturing processes, saving time and effort.
With a maximum supply voltage of 5.5V, this product can handle higher voltage applications without risk of damage, providing flexibility in use.
Having 4 functions in one IC maximizes efficiency and saves space on a circuit board, making it a versatile and efficient choice for multi-functional systems.
The rectangular package shape is common and easy to work with, allowing for standardization and compatibility with various electronic components and designs.
With 16 terminals, this IC offers multiple connection points for versatile usage and connectivity in electronic circuits, enhancing its adaptability.
The small outline and shrink pitch package style helps in conserving space and reducing overall size, making it ideal for compact electronic devices and applications.
The low minimum supply voltage requirement of 2.375V allows for energy-efficient operation and compatibility with lower power sources, enhancing versatility.
With a maximum operating temperature of 125°C, this IC can withstand higher temperatures, ensuring reliability in various environmental conditions and applications.
The minimum operating temperature of -40°C enables this IC to function effectively in cold environments, increasing its usability across a wide range of operating conditions.
Dual terminal position allows for easy and secure connections, enhancing reliability and ease of use during installation and maintenance.
The low maximum seated height of 1.75mm enables compact and slim designs, making this IC suitable for space-constrained applications.
With a width of 3.9mm, this IC is compact and space-saving, facilitating integration into small electronic devices and applications.
The high peak reflow temperature of 260°C ensures reliable soldering during manufacturing processes, contributing to the overall quality and durability of the product.
The length of 4.89 mm provides a balanced form factor for ease of handling and installation, making this IC convenient and practical for use in various projects.
CMOS technology offers low power consumption and high noise immunity, enhancing the efficiency and performance of this IC in digital isolator applications.
The gull wing terminal form simplifies soldering and ensures secure connections, contributing to the reliability and longevity of the product.
The nominal supply voltage of 5V provides compatibility with standard voltage levels, making this IC widely usable in various electronic systems and designs.
With a terminal pitch of 0.635mm, this IC offers precise and compact connections, enabling high-density mounting and efficient use of board space.
Being a digital isolator, this IC provides secure isolation and communication between different parts of a circuit, ensuring safety and reliability in data transmission.
Other Function Interface ICs SI8642BA-B-IU attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Additional Features:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI8642BA-B-IU Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ADUM5402CRWZ
Analog Devices
ADUM5402CRWZ by Analog Devices is a 16-terminal interface IC with supply voltage range of 3-5.5V, operating temperature from -40 to 105°C. It is used in industrial applications requiring small outline package and dual terminal position for reliable signal isolation.
PCA9517ADP-T
PCA9517ADP-T by NXP Semiconductors is an 8-terminal interface IC with a supply voltage range of 0.9V to 5.5V, suitable for industrial applications. It features a small outline package style, operates b/w -40°C to 85°C, and has a terminal pitch of 0.65mm for surface mount assembly.
MAX253CPA
Maxim Integrated
MAX253CPA by Maxim Integrated is an 8-terminal IC with a supply voltage range of 4.5V to 5.5V, operating b/w 0°C to 70°C. It features a CMOS technology and is ideal for interface circuit applications due to its rectangular package shape and through-hole terminal form.
XISO6741FDWR
XISO6741FDWR by Texas Instruments is a digital isolator with 4 functions, operating at temperatures from -40 to 125°C. It has a supply voltage range of 1.71V to 5.5V and comes in a small outline package suitable for automotive applications. With CMOS technology and gull wing terminals, it offers reliable isolation for up to 4 channels.
XISO1212DBQ
Digital I/P Module;
ISO7240CDWR
ISO7240CDWR by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and 3.3V nominal voltage. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various interface applications. The small outline package with dual terminals and gull wing form factor ensures easy surface-mount installation.
MAX3646ETG+
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SI8640BC-B-IS1
Silicon Labs
SI8640BC-B-IS1 by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375-5.5V, and temp range of -40 to 125°C. It comes in a small outline package suitable for surface mount applications in various electronic devices.
SI8641BA-B-IUR
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
ADUM3166BRSZ
INTERFACE CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
LTC6820IMS#PBF
LTC6820IMS#PBF by Analog Devices is a CMOS interface IC with 16 terminals, operating from -40 to 85 °C. It has a supply voltage range of 2.7V to 5.5V and comes in a small outline package suitable for industrial applications requiring thin profile and shrink pitch designs.
APV1121SZ
Aromat
Other Interface ICs;
PCA9306DCTTE4
PCA9306DCTTE4 by Texas Instruments is an interface IC with 2 functions, operating at a supply voltage range of 1.8V to 5.5V. It features open-drain output characteristics and a max delay of 1.3ns, suitable for industrial applications requiring level shifting in compact designs. The package style is small outline, low profile, shrink pitch with dual terminal position and nickel/palladium/gold finish.
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
ISO7721FQDRQ1
ISO7721FQDRQ1 by Texas Instruments is a CMOS digital isolator with 2 channels, AEC-Q100 screening level, and 2.25-5.5V supply voltage range. Ideal for automotive applications, it features a small outline package style, dual terminal position, and operates b/w -40 to 125°C temperatures.
ADUM5201ARWZ-RL
ADUM5201ARWZ-RL by Analog Devices is a 16-terminal interface IC with a supply voltage range of 3V to 3.6V, operating from -40°C to 105°C. It features a small outline package suitable for industrial applications requiring dual terminal positions and matte tin finish for surface mount assembly.
ISO7731DWR
ISO7731DWR by Texas Instruments is a 16-terminal IC with 3 functions, operating at -55 to 125°C. It has a supply voltage range of 2.25V to 5.5V and uses CMOS technology. Ideal for military-grade applications requiring small outline packages and interface circuits with high reliability.
SI8660ED-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Length: 10.3 mm;
SI8661BB-B-IS1
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ISO7762DW
ISO7762DW by Texas Instruments is a 16-terminal IC with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and uses CMOS technology. This interface circuit in a small outline package is ideal for military-grade applications requiring high reliability and dual terminal positions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8641BB-B-IS1R
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
SI8641BB-B-IS1R by Silicon Labs is a 16-terminal digital isolator with 4 functions. It operates b/w -40 to 125°C, with supply voltage ranging from 2.375V to 5.5V. Ideal for applications requiring small outline packages and surface mount technology.
SI8641BB-B-IS1
SI8641BB-B-IS1 by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for surface mount applications in various electronic devices.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
SI8642ED-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;
SI8621BB-B-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
SI8621BB-B-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8621AB-B-ISR
SI8621AB-B-ISR by Silicon Labs is a digital isolator with 8 terminals, operating voltage range of 2.5V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, GULL WING terminal form, and small outline package style suitable for surface mount assembly in various electronic systems. With an extended temperature range from -40°C to 125°C, it offers reliable isolation in harsh environments.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 2.5 V;
SI8620BB-B-ISR
SI8641BD-B-ISR
SI8641BD-B-ISR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and dual terminal position. It is used in applications requiring small outline package style, CMOS technology, and temperature range from -40°C to 125°C.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 4;
SI8631BD-B-IS
SI8631BD-B-IS by Silicon Labs is a 16-terminal digital isolator with 2.5-5.5V supply voltage range, AEC-Q100 screening for automotive applications, and -40 to 125°C operating temperature. It features a small outline package style, CMOS technology, and gull wing terminal form suitable for various interface applications.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8641BA-B-IUR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for various applications requiring interface isolation and signal transmission in electronic systems.
SI8641BA-B-IU
SI8641BA-B-IU by Silicon Labs is a digital isolator with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 2.375V to 5.5V and comes in a small outline package suitable for surface mount applications. Ideal for systems requiring high-speed signal isolation in compact spaces.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Package Equivalence Code: SSOP16,.25;
Silicon Labs SI8661BB-B-IS1 is a 16-terminal digital isolator with 2.375V to 5.5V supply range, AEC-Q100 screening for automotive applications, and -40°C to 125°C operating temperature. It features CMOS technology, GULL WING terminals, and small outline package ideal for various function interface ICs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved