Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI53306-B-GM by Silicon Labs is a Clock Driver & Buffer with 16 terminals and 2.75 ns propagation delay. It operates in industrial temperature range (-40 to 85 °C) and supports differential input conditioning. Ideal for applications requiring precise clock distribution in compact spaces.
Median Price
$3.850
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$2.610
1k+ parts
-
10k+ parts
DigiKey
$4.860
$3.084
$2.765
$2.671
RS (Exports)
$4.178
$3.977
Rochester
$2.380
$2.130
$2.000
Verical
$2.663
$2.500
Digiode
$2.878
Nova Conductors
$3.606
Chip Stock
Vyrian
Semtec, LLC
Flip Electronics
Bristol Electronics
PC Components Company LLC
Sensible Micro Corp
Bas Electronics GmbH & Co. KG
Semi Source
Classic Components Corporation
A2Z Electronics, Inc.
Prism Electronics
ACDS - Activité Composants Distribution Service
Component Sense
Semicontronic
$2.580
$2.516
$2.503
Ampacity Inc.
Corphita
$2.727
Argo Parts USA
Continental Prestige Electronics
$3.534
Aztec Data Supply Inc.
$10.337
Andel Nordic
$10.772
$10.341
Microchip USA
$14.532
Corohmni
$16.433
Advanced Electronics
$34.983
$33.234
Lixinc
Authorized Procurement Solutions
RC Electronics
$3.320
$3.030
$2.940
Perfect Parts
Allen Electronics Distributors
$3.294
$3.136
Alle Elektronik GmbH
Robosynatics
$11.773
Lucentia Tech
Component Stockers USA
Glotronic Ltd.
Cyclops Electronics Ltd (Excess)
Surface Mount technology allows for easy and efficient assembly onto circuit boards, making this product convenient for manufacturing processes.
Differential input conditioning ensures reliable signal processing, making this product suitable for high-performance applications.
Square package shape helps in efficient use of board space and placement, making the product compact and space-saving.
Operating at a nominal supply voltage of 1.8V makes this product energy-efficient and suitable for low power consumption applications.
With a low propagation delay of 2.75 ns, this product provides quick signal processing and reduces latency in the system.
Operating at a maximum temperature of 85°C ensures reliability in various temperature conditions, making this product suitable for industrial use.
3-STATE output characteristics provide flexibility in controlling the output signals, making this product versatile and adaptable to different system requirements.
CMOS technology offers low power consumption and high noise immunity, making this product efficient and reliable in digital systems.
Clock Drivers & Buffers SI53306-B-GM attributes and parameters. Explore more Clock Drivers & Buffers devices from Silicon Labs
Additional Features:
Family:
Input Conditioning:
JESD-30 Code:
JESD-609 Code:
Length:
Logic IC Type:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Inverted Outputs:
No. of Terminals:
No. of True Outputs:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Propagation Delay (tpd):
Maximum Same Edge Skew (tskwd):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI53306-B-GM Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
Vishay Telefunken
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Gec Plessey Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Crimson Semiconductor
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
5T30553DCGI8
Renesas Electronics
The Renesas Electronics 5T30553DCGI8 clock driver has a propagation delay of 5ns, operates at a nominal voltage of 2.5V, and offers 4 true outputs. Ideal for industrial applications requiring precise timing synchronization in compact designs.
CDCLVC1104PWR
Texas Instruments
CDCLVC1104PWR by Texas Instruments is a Clock Driver & Buffer with 2.6 ns Propagation Delay, suitable for Industrial applications. It operates at a Nominal Voltage of 2.5V and has a Max fmax of 250 MHz, making it ideal for high-speed clock signal distribution in electronic systems. The package style is Small Outline with Surface Mount capability, featuring 8 terminals and a compact design for space-constrained PCB layouts.
ZL40234LDF1
Microchip Technology
ZL40234LDF1 by Microchip Technology is a clock driver & buffer with surface mount capability. It has a differential mux input conditioning and 1 function. With a square package, it operates at a nominal voltage of 2.5V and has a propagation delay of 2.07ns. Its compact size (5mm x 5mm) makes it suitable for various industrial applications requiring high frequency performance up to 1600MHz.
9DB803DGILF
Integrated Device Technology
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TSSOP; Package Shape: RECTANGULAR;
ZL40226LDF1
ZL40226LDF1 by Microchip Tech is a Clock Driver with 2ns Propagation Delay, 32 Terminals, and 16 True Outputs. It operates in Industrial Temperature range (-40 to 85°C) and supports Differential Mux input conditioning. Ideal for applications requiring precise clock signal distribution in compact spaces.
ICS83948AYI-147LFT
Integrated Circuit Systems
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE;
853S011BMILF
Renesas Electronics' 853S011BMILF is a clock driver with 0.355 ns propagation delay, suitable for industrial applications. It operates at 3.3V nominal voltage and offers differential input conditioning. With a small outline package style, it features dual terminal position and gull wing form.
9DBL0841BKILFT
The Renesas Electronics 9DBL0841BKILFT is a clock driver and buffer with surface mount capability. It features differential mux input conditioning, operates at a nominal voltage of 3.3V, and has 8 true outputs. This component is commonly used in industrial applications requiring precise timing control.
23S09-1DCG
Renesas Electronics 23S09-1DCG is a clock driver with 16 terminals, operating at 3.3V. It features MUX input conditioning, 8A max I (ol), and 9 true outputs at up to 133MHz. Ideal for applications requiring precise clock signal distribution in commercial-grade environments.
CDCM61004RHBR
CDCM61004RHBR clock driver by Texas Instruments operates at 3.3V, with 32 terminals and load capacitance of 5pF. It features input conditioning MUX for industrial applications, with a max operating temperature of 85°C and package style in CHIP CARRIER form.
SY89833ALMG-TR
Micrel
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
854S054AGILFT
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
PI6C4931502-04LIEX
Pericom Semiconductor
5PB1104PGGK
The Renesas Electronics 5PB1104PGGK clock driver has a propagation delay of 2.5 ns, operates at a voltage of 1.8V, and supports surface mount installation. It is ideal for applications requiring precise timing synchronization in electronic devices with limited space constraints.
ICS874001AGI-02LF
ICS874001AGI-02LF clock driver by Integrated Device Technology features a 3.3V nominal voltage, differential input conditioning, and operates in industrial temperature grade range (-40 to 85°C). With a small outline package style and dual terminal position, it is suitable for applications requiring precise clock signal distribution at frequencies up to 98MHz.
ICS574MLF
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
5PB1104CMGK8
The Renesas Electronics clock driver 5PB1104CMGK8 has a propagation delay of 2.5 ns, operates at a supply voltage of 1.8V, and offers 4 true outputs. It is used in applications requiring precise timing control, such as industrial automation systems and communication equipment.
LMK00338RTAR
LMK00338RTAR by Texas Instruments is a Clock Driver & Buffer with 2.7 ns Propagation Delay, suitable for applications requiring fast signal processing. It operates at a Nominal Voltage of 3.3V and offers Differential MUX Input Conditioning. With Surface Mount capability and 40 terminals, it provides versatile clock management solutions in industrial settings.
SY58031UMG
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
IDT5V9950PFGI8
IDT5V9950PFGI8 clock driver by Integrated Device Technology features 32 terminals, operates at a temperature range of -40 to 85 °C, and has a max supply voltage of 3.6 V. It is ideal for industrial applications requiring clock drivers with standard input conditioning and low profile flatpack packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI53307-B-GMR
Skyworks Solutions
LOW SKEW CLOCK DRIVER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Width: 3 mm;
Silicon Labs
SI53307-B-GMR by Silicon Labs is a Clock Driver with 1.075 ns Propagation Delay, 16 Terminals, and 5 pF Load Capacitance. It is used in applications requiring precise timing control and signal synchronization, such as high-speed data communication systems or industrial automation equipment.
SI53306-B-GMR
SI53306-B-GMR clock driver by Silicon Labs features 1.05 ns propagation delay, 3.3V nominal voltage, and 5 pF load capacitance. Ideal for industrial applications requiring precise timing synchronization in a compact chip carrier package with standard input conditioning and low power consumption.
LOW SKEW CLOCK DRIVER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Maximum Supply Voltage (Vsup): 1.89 V;
SI53306-B-GM
LOW SKEW CLOCK DRIVER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; No. of True Outputs: 6;
SI53307-B-GM
SI53307-B-GM clock driver by Silicon Labs features 16 terminals, 1.8V supply voltage, and 1.075ns propagation delay. Ideal for industrial applications requiring a differential mux input conditioning and 3-state output characteristics in a compact chip carrier package with a low profile design.
LOW SKEW CLOCK DRIVER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
SI53340-B-GM
SI53340-B-GM by Silicon Labs is a clock driver with 1000 ns propagation delay, suitable for industrial applications. It operates at 1.8/3.3V and has 16 terminals in a square package shape, making it ideal for differential mux input conditioning. With a max operating temperature of 85°C, this chip carrier features no-lead terminal form and very thin profile style.
SI53340-B-GMR
SI53340-B-GMR by Silicon Labs is a clock driver with 1000ns propagation delay, operating at 1.8/3.3V. It has 16 terminals in a square chip carrier package for industrial applications requiring -40 to 85°C temperature range and surface mount compatibility.
Clock Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE;
SI53322-B-GM
SI53301-B-GMR
LOW SKEW CLOCK DRIVER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Propagation Delay (tpd): 1 ns;
SI53301-B-GMR by Silicon Labs is a clock driver with 1 ns propagation delay, suitable for differential input conditioning. It features 32 terminals in a square package style and operates b/w -40 to 85 °C. Ideal for applications requiring precise timing control and low power consumption.
SI5330F-B00214-GMR
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SI53322-B-GMR
SI53322-B-GMR by Silicon Labs is a clock driver & buffer with a propagation delay of 0.975 ns, operating temperature range of -40 to 85 °C, and power supplies of 2.5/3.3 V. It is commonly used in industrial applications requiring precise timing control.
SI53305-B-GMR
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 44; Package Code: HVQCCN; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved