Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI4133-D-GT by Silicon Labs is a PLL & Frequency Synthesis Circuit with 24 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.7V to 3.6V and peak reflow temp of 260°C. Ideal for industrial applications requiring precise frequency control in compact designs.
Median Price
$9.737
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$6.260
100+ parts
$5.280
1k+ parts
$5.240
10k+ parts
-
Newark
$8.810
$7.350
$6.720
Chip1Stop
$10.664
$8.023
$7.970
Element14
$10.950
$10.550
Mouser Electronics
$11.220
$8.180
$7.330
$7.110
DigiKey
$8.763
$7.768
$7.514
Arrow
$7.459
Verical
Digiode
$10.121
Vyrian
$10.654
Chip Stock
Mil-Aero Solutions, Inc.
PC Components Company LLC
Nova Conductors
Bristol Electronics
Aztec Data Supply Inc.
Ampacity Inc.
$9.060
Corphita
$9.589
Component Stockers USA
$10.520
$7.700
Authorized Procurement Solutions
Perfect Parts
Speed Components Ltd (Excess)
Aranea Global
This material is lightweight and durable, making the product easy to handle and resistant to damage.
Allows for easy and efficient installation onto circuit boards, saving time and effort during assembly.
Operates at a standard voltage level, ensuring compatibility with most electronic systems.
Can withstand higher temperatures, making it suitable for industrial settings where heat may be a concern.
Provides multiple connection points for a secure and stable electrical connection.
Compact size allows for space-saving installation in electronic devices.
Can operate at lower voltages, making it energy efficient and versatile.
Designed to withstand harsh industrial environments, ensuring reliable performance under tough conditions.
Phase Locked Loops (PLL) & Frequency Synthesis Circuits SI4133-D-GT attributes and parameters. Explore more Phase Locked Loops (PLL) & Frequency Synthesis Circuits devices from Silicon Labs
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
SI4133-D-GT Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Onsemi
1N4148WS
Surge Components
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Changzhou Galaxy Century Microelectronics
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LMX2531LQ3010E/NOPB
LMX2531LQ3010E/NOPB by Texas Instruments is a PLL frequency synthesizer with a max output frequency of 3132 GHz. Operating at a nominal voltage of 3 V, it features a BICMOS technology and is suitable for industrial applications requiring precise frequency synthesis in compact designs. This chip carrier package with very thin profile offers surface mount capability and operates within a wide temperature range from -40 to 85 °C.
TRF3750IRGPG4
TRF3750IRGPG4 by Texas Instruments is a PLL frequency synthesizer with 20 terminals, operating at 3.3V/5V. It features a temperature range of -40 to 85°C and a package style of chip carrier with very thin profile, suitable for industrial applications requiring precise frequency synthesis in compact designs.
SKY74038-13
Skyworks Solutions
SKY74038-13 by Skyworks Solutions is a PLL frequency synthesizer with 28 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.6V to 3.6V and peak reflow temperature of 225°C. This rectangular package is ideal for industrial applications requiring low profile, shrink pitch design.
TLC2933IPWR
TLC2933IPWR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 14 terminals, operating at 3V. It has a temperature range of -20 to 75°C and supports supply voltages of 2.85-3.15V. Ideal for applications requiring Phase Locked Loop technology in compact designs.
TLC2933IPWLE
TLC2933IPWLE by Texas Instruments is a PLL & Frequency Synthesis Circuit with 14 terminals, operating at 3V. It features a small outline package style and CMOS technology, suitable for commercial extended temperature applications. The IC has a dual terminal position and operates b/w -20 to 75 °C.
LTC6951IUHF#TRPBF
Linear Technology
PLL FREQUENCY SYNTHESIZER; Temperature Grade: INDUSTRIAL; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LMX2531LQX1415E
Texas Instruments LMX2531LQX1415E is a PLL frequency synthesizer with 36 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.8V to 3.2V and peak reflow temperature of 235°C. Ideal for applications requiring precise frequency synthesis in industrial settings.
LMX3305SLBX
LMX3305SLBX by Texas Instruments is a PLL frequency synthesizer with 24 terminals, operating voltage of 2.7-3.6V, and temperature range of -30 to 85°C. It is surface mountable in a rectangular chip carrier package, suitable for applications requiring precise frequency synthesis and phase-locked loops in compact designs.
LMX2332LTM/NOPB
LMX2332LTM/NOPB by Texas Instruments is a PLL & Frequency Synthesis Circuit with 20 terminals, operating at -40 to 85°C. It has a supply voltage of 3/5V and consumes 4.1mA max current. Ideal for industrial applications requiring a compact, surface-mountable solution with a bandwidth of 4.4kHz.
TLC2934PWR
TLC2934PWR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 14 terminals, operating at 3.3V. It has a small outline package style, suitable for commercial extended temperature applications. The IC features a phase detector and Gull Wing terminal form, making it ideal for compact designs in various electronic devices.
LMX2430TMX
LMX2430TMX by Texas Instruments is a PLL frequency synthesizer with 20 terminals, operating at temperatures from -40 to 85°C. It has a supply voltage range of 2.25-2.75V and consumes up to 3.6mA current, suitable for industrial applications requiring precise frequency synthesis in compact designs.
UC2634DWTR
The Texas Instruments UC2634DWTR is a PLL frequency synthesizer IC with 16 terminals and a supply voltage range of 8V to 15V. It operates b/w -25°C to 85°C, making it suitable for various applications requiring precise frequency synthesis in small outline packages. The technology used is bipolar with gull wing terminal form and rectangular package shape.
CD74HC4046ANSRE4
CD74HC4046ANSRE4 by Texas Instruments is a Phase Locked Loop (PLL) IC with 16 terminals. It operates at supply voltages b/w 2-6V and has a low supply current of 0.16mA. Ideal for military-grade applications due to its wide temperature range (-55 to 125°C) and small outline package style.
CD4046BPWR
CD4046BPWR by Texas Instruments is a Phase Locked Loop (PLL) IC with 16 terminals, operating voltage of 3-18V, and CMOS technology. It has a temperature range of -55 to 125°C and is suitable for military-grade applications requiring frequency synthesis circuits in compact designs. The package is surface mountable, with dimensions of 5x4.4mm and a low seated height of 1.2mm.
MC145152P2
PLL FREQUENCY SYNTHESIZER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM2324TMX
LM2324TMX by Texas Instruments is a PLL frequency synthesizer with 16 terminals, operating voltage range of 2.7V to 5.5V, and industrial temperature grade. It features BICMOS technology, Gull Wing terminal form, and small outline package suitable for phase-locked loops & frequency synthesis circuits in various applications.
LMX2531LQX3010E
LMX2531LQX3010E by Texas Instruments is a PLL frequency synthesizer with 36 terminals, operating voltage range of 2.8V to 3.2V, and industrial temperature grade. It features a square chip carrier package style, Tin Lead terminal finish, and operates b/w -40°C to 85°C. Ideal for applications requiring precise frequency synthesis in compact designs.
SM802123UMG
SM802123UMG by Microchip Technology is a PLL frequency synthesizer with 44 terminals, operating b/w -40 to 85°C. It features a supply voltage range of 2.375V to 2.625V and consumes up to 170mA. This chip carrier with a very thin profile is ideal for industrial applications requiring precise frequency synthesis in compact designs.
LMX2336UTM
LMX2336UTM by Texas Instruments is a PLL frequency synthesizer with 20 terminals, operating voltage range of 2.7V to 5.5V, and temperature range of -40°C to 85°C. It features a small outline package suitable for industrial applications requiring precise frequency synthesis in compact designs.
TRF376121IRHAR
TRF376121IRHAR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 40 terminals, operating at -40 to 85°C. It has a supply voltage of 5V and comes in a square-shaped chip carrier package. Ideal for industrial applications requiring precise frequency control and synchronization.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI4112-D-GM
Silicon Labs
PHASE LOCKED LOOP; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
SI4113-D-GM
SI4122-D-GM
SI4133-D-GM
SI4133-D-GM by Silicon Labs is a PLL & Frequency Synthesis Circuit with 28 terminals, operating voltage range of 2.7V to 3.6V, and temperature range of -40°C to 85°C. It is used in industrial applications requiring precise frequency control in compact spaces due to its small square package shape and low profile design.
SI4112-D-GT
PHASE LOCKED LOOP; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SI4123-D-GT
SI4123-D-GT by Silicon Labs is a PLL & Frequency Synthesis Circuit with 24 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.7V to 3.6V and comes in a small outline package for industrial applications requiring precise frequency control.
SI4113-D-GT
SI4113G-BT
PHASE LOCKED LOOP; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SI4122-D-GT
SI4133G-BT
SI4133G-XT2
SI4123-D-GTR
SI4133-D-GTR
SI4133-D-GT
SI4113-D-GTR
SI4122-D-GTR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved