Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PHASE LOCKED LOOP; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$9.536
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Digiode
1+ parts
$9.291
100+ parts
-
1k+ parts
10k+ parts
Vyrian
$9.780
Cyclops Electronics Ltd
Corphita
$8.802
Component Stockers USA
$9.540
Microchip USA
$22.792
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Phase Locked Loops (PLL) & Frequency Synthesis Circuits SI4113-D-GT attributes and parameters. Explore more Phase Locked Loops (PLL) & Frequency Synthesis Circuits devices from Silicon Labs
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
SI4113-D-GT Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Yangzhou Yangjie Electronics
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Fairchild Semiconductor
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
LM358AN
Signetics
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
Hy Electronic
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LMX2331USLEX
LMX2331USLEX by Texas Instruments is a PLL frequency synthesizer with 24 terminals, operating at 3V and 3.8mA. It has a temperature range of -40 to 85°C, suitable for industrial applications requiring precise frequency synthesis in compact form factor. The chip carrier package with a very thin profile makes it ideal for surface mount designs.
CD4046BPWE4
CD4046BPWE4 by Texas Instruments is a Phase Locked Loop (PLL) IC with 16 terminals, operating at temperatures from -55 to 125°C. It has a supply voltage range of 5-18V and is suitable for military-grade applications requiring frequency synthesis circuits in compact spaces. The package style is small outline, thin profile, shrink pitch, making it ideal for surface mount designs.
ADF4350BCPZ-RL7
Analog Devices
ADF4350BCPZ-RL7 by Analog Devices is a PLL frequency synthesizer with a supply voltage of 3.3V and max operating temperature of 85°C. It is surface mountable and has a square package, making it suitable for industrial applications requiring precise frequency synthesis.
TRF3761-AIRHAT
TRF3761-AIRHAT by Texas Instruments is a PLL frequency synthesizer with 5V supply voltage, 1608 GHz output frequency, and -40 to 85°C operating temperature range. It comes in a square plastic/epoxy package suitable for industrial applications requiring precise frequency synthesis and phase-locked loops.
TRF3761-JIRHATG4
TRF3761-JIRHATG4 by Texas Instruments is a PLL frequency synthesizer with 40 terminals, operating at -40 to 85°C. It has a supply voltage range of 4.5V to 5.25V and can withstand peak reflow temperature of 260°C for up to 30s. Ideal for industrial applications requiring precise frequency synthesis in compact form factor.
CD4046BPW
CD4046BPW by Texas Instruments is a Phase Locked Loop IC with 16 terminals, operating voltage range of 3-18V. It has a compact package style and can withstand temperatures from -55 to 125°C. Ideal for frequency synthesis circuits in military-grade applications.
LMC568CM/NOPB
LMC568CM/NOPB by Texas Instruments is a Phase Locked Loop (PLL) IC with 8 terminals, operating voltage of 2-9V. It has a small outline package, CMOS technology, and operates b/w -25 to 100°C. Ideal for frequency synthesis circuits in various applications.
CD74HC4046AE
Rca Solid State
PLL or Frequency Synthesis Circuits; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ADF4002BRUZ-RL7
ADF4002BRUZ-RL7 by Analog Devices is a PLL frequency synthesizer with 16 terminals and a supply voltage range of 2.7V to 3.3V. It operates in industrial temperature grades from -40°C to 85°C, making it suitable for various applications requiring precise frequency synthesis and phase-locked loop functionality in compact designs. The package style is small outline, thin profile, shrink pitch, with surface mount capability for easy integration into electronic systems.
UC1635J883B
UC1635J883B by Texas Instruments is a PLL frequency synthesizer with 16 terminals, operating voltage range of 8V to 15V, and temperature grade MILITARY. It features a ceramic, glass-sealed rectangular package style suitable for applications requiring precise frequency synthesis in harsh environments. With a wide operating temperature range from -55°C to 125°C, it is ideal for military-grade communication systems and aerospace applications.
HMC835LP6GETR
Analog Devices' HMC835LP6GETR is a PLL & Frequency Synthesis Circuit with 40 terminals, operating at -40 to 85°C. It has a supply voltage range of 3.1V to 3.5V and peak reflow temp of 260°C. Ideal for industrial applications requiring precise frequency control in compact designs.
LMX2485ESQX/NOPB
LMX2485ESQX/NOPB by Texas Instruments is a PLL frequency synthesizer with a max output freq of 3000 GHz. Operating at 3V, it's ideal for industrial applications requiring precise frequency synthesis. This CMOS technology chip carrier has 24 terminals and operates b/w -40 to 85°C.
TLC2933AIPWR
TLC2933AIPWR by Texas Instruments is a PLL & Frequency Synthesis Circuit with 110 GHz output frequency, 3V supply voltage, and 55mA max supply current. Ideal for commercial applications requiring CMOS technology in compact SOT-23 package.
TLC2934IPWG4
TLC2934IPWG4 by Texas Instruments is a PLL & Frequency Synthesis Circuit with 14 terminals, operating at 3.3V. It has a temp range of -20 to 75°C and terminal finish of NiPdAu. Ideal for applications requiring small outline packages and thin profiles, such as communication systems and consumer electronics.
CD54HC4046AF
CD54HC4046AF by Texas Instruments is a CMOS Phase Locked Loop IC with 16 terminals. It operates b/w -55 to 125 °C, with Vsup ranging from 2V to 6V. Ideal for military-grade applications requiring precise frequency synthesis and PLL functionality in a compact IN-LINE package.
MC44817BD
Motorola
MC44817BD by Motorola is a PLL Frequency Synthesizer with 16 terminals, operating at 4.5-5.5V. It has a temperature range of -20 to 80°C and uses bipolar technology for commercial extended applications. The package is small outline, rectangular in shape, with surface mount capability.
LMX2531LQX2570E
LMX2531LQX2570E by Texas Instruments is a PLL frequency synthesizer with 36 terminals, operating temperature range of -40 to 85°C, and supply voltage from 2.8V to 3.2V. It features a square package shape suitable for industrial applications requiring precise frequency synthesis in compact designs.
LM2324TMX
LM2324TMX by Texas Instruments is a PLL frequency synthesizer with 16 terminals, operating voltage range of 2.7V to 5.5V, and industrial temperature grade. It features BICMOS technology, Gull Wing terminal form, and small outline package suitable for phase-locked loops & frequency synthesis circuits in various applications.
UC2634DWTR
The Texas Instruments UC2634DWTR is a PLL frequency synthesizer IC with 16 terminals and a supply voltage range of 8V to 15V. It operates b/w -25°C to 85°C, making it suitable for various applications requiring precise frequency synthesis in small outline packages. The technology used is bipolar with gull wing terminal form and rectangular package shape.
CS2300CP-CZZ
Cirrus Logic
CS2300CP-CZZ by Cirrus Logic is a PLL & Frequency Synthesis Circuit with 10 terminals, operating at 3.3V. It has a small outline package shape and hybrid technology, suitable for commercial temperature grade applications. The IC features a max supply current of 23mA and operates b/w -10 to 70°C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved