Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT;
Median Price
$12.791
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
$10.466
100+ parts
-
1k+ parts
10k+ parts
Verical
Chip1Stop
$13.300
Flip Electronics (Authorized)
Digiode
$7.154
Nova Conductors
$22.299
Flip Electronics
Vyrian
Ampacity Inc.
$6.400
Corphita
$6.778
Continental Prestige Electronics
$22.198
$21.754
Argo Parts USA
Other Function Telecom Interface ICs RS9116N-SB00-B00-B00 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Telecom IC Type:
RS9116N-SB00-B00-B00 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Panjit International
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
Excel (Suzhou) Semiconductor
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
Formosa Microsemi
CY7B923-JXCT
Cypress Semiconductor
TELECOM CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
ADRF5044BCCZN
Analog Devices
Analog Devices' ADRF5044BCCZN is a 24-terminal SQUARE IC with -40 to 85°C temp range. Ideal for TELECOM CIRCUITS, it operates at 3.3V, has a 0.5mm terminal pitch, and MSL of 3.
TDK5110FHTMA1
Infineon Technologies
Infineon's TDK5110FHTMA1 is a telecom IC with 10 terminals, operating at -40 to 125°C. It has a supply voltage of 3V and consumes 0.021mA current. This small outline IC in plastic package is ideal for automotive telecom applications.
TLK2711IRCP
TLK2711IRCP by Texas Instruments is a telecom IC with 64 terminals, operating at -40 to 85°C. It has a supply voltage of 2.5V and terminal pitch of 0.5mm. Ideal for telecom circuits, it features a flatpack package style and nickel palladium gold terminal finish.
BGM11S22F256GA-V2
Silicon Labs
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e4; Terminal Finish: NICKEL GOLD;
BLUENRG-MSQTR
BLUENRG-MSQTR by STMicroelectronics is a 32-terminal telecom IC with a 3V supply voltage. It operates b/w -40 to 85°C, suitable for industrial use. With a square shape and chip carrier package style, it's ideal for telecom circuit applications.
PE4312C-Z
Psemi
PE4312C-Z by Psemi is a 20-terminal IC with -55 to 105°C operating temp range. It features CMOS tech, -3.3V negative supply, and 3.3V nominal voltage. Ideal for telecom circuits, it's a square chip carrier with nickel palladium gold finish and quad terminal position.
453-00059R
Laird Technologies
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
MAX2771ETI+
Analog Devices' MAX2771ETI+ is a BICMOS telecom IC with 28 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial applications. With a nominal voltage of 2.85V, it's ideal for telecom circuit interfaces requiring precise temperature control.
BGM111A256V2R
BGM111A256V2R by Silicon Labs is a telecom IC with 31 terminals, operating b/w -40°C to 85°C. It has a supply voltage of 3.3V and compact dimensions of 12.9mm width and 15mm length. Ideal for industrial applications requiring a surface-mount rectangular package with a terminal pitch of 1.2mm.
SX1503I091TRT
Semtech
Semtech's SX1503I091TRT is a telecom IC with 28 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and matte tin finish, suitable for industrial applications requiring a compact chip carrier package with very thin profile.
ISP1507-AX-JT
Insight Sip
ISP1507-AX-JT by Insight Sip is a telecom IC with 62 terminals, operating at -40 to 85°C. It has a data rate of 2 Mbps and nominal voltage of 3V. Ideal for industrial applications requiring high-speed communication in compact form factor.
EFR32BG22C224F512GM32-C
TELECOM CIRCUIT; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40;
75S10010A200BR
Renesas Electronics
Other Telecom ICs;
SI4010-C2-GTR
SI4010-C2-GTR by Silicon Labs is a telecom IC with 10 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and uses CMOS technology. This small outline package is ideal for telecom circuit applications due to its industrial temperature grade and surface mount capability.
BT840X
Fanstel
BT840X by Fanstel is a surface mount telecom IC with 61 terminals. It operates b/w -40°C to 85°C, has a nominal voltage of 3.3V, and supports data rates up to 2 Mbps. Ideal for applications requiring high-speed telecommunications in compact electronic assemblies.
ZED-F9T-10B
U-blox Ag
NEO-M8T-0
NEO-M8T-0 by U-blox Ag is a telecom IC with 24 terminals, operating from -40 to 85°C. With a compact size of 12.2mm x 16mm and low supply voltage of 3V, it's ideal for industrial applications requiring precise positioning and timing accuracy. Its no-lead terminal form and dual position make it suitable for various telecom circuit designs.
RS9116W-SB00-B00-X23
Silicon Labs RS9116W-SB00-B00-X23 is a telecom IC with 126 terminals, operating from -40 to 85°C. It has a supply voltage of 1.85V and MSL level of 3, suitable for industrial applications requiring reliable telecom circuit interfaces in surface-mount packages.
DWM1000
Qorvo
The Qorvo DWM1000 is a surface-mount telecom IC with 24 terminals, operating temperature range of -40 to 85°C. It features a data rate of 6.8 Mbps and CMOS technology, suitable for industrial applications requiring precise wireless communication in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RS9116W-DB00-CC1-B2A
RS9116W-SB00-B00-B2A
RS9116N-DB00-CC1-B00
RS9116W-DB00-CC1-X23
Silicon Labs RS9116W-DB00-CC1-X23 is a telecom IC with 107 terminals, operating from -40 to 85°C. It has a nominal voltage of 1.85V and is designed for industrial applications requiring a surface-mount grid array package shape.
RS9116N-DB00-CC0-B00
RS9116W-DB00-CC1-B2B
RS9116W-SB00-QMS-B2A
RS9116W-SB00-B00
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 126; Package Code: LGA; Package Shape: RECTANGULAR;
Redpine Signals
RS9116W-DB00-CC0-B24
RS9116W-SB00-QMS-B24
RS9116W-DB00-CC1
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 107; Package Code: LGA; Package Shape: RECTANGULAR;
Silicon Labs' RS9116W-DB00-CC1 is a telecom IC with 107 terminals, operating from -40 to 85°C. It has a nominal voltage of 1.85V and is surface-mountable in industrial applications. The package style is grid array, making it suitable for various telecom circuit interfaces.
RS9116W-SB00-AA1-X2A
RS9116W-DB00-CC0-B2A
RS9116W-DB00-CC1-X11
RS9116N-SB00-AA1-X00
RS9113-NB0-D1C
Silicon Labs' RS9113-NB0-D1C is a telecom IC with 54 Mbps data rate, operating at -40 to 85°C. With 79 terminals in a rectangular package of 16x27 mm, it's ideal for industrial applications requiring a surface-mount solution.
RS9116N-SB00-B00
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved