Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs RS9116W-DB00-CC1-X11 is a telecom IC with 107 terminals, operating from -40 to 85°C. It has a supply voltage of 1.85V and is designed for industrial applications requiring surface mount technology in a grid array package.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
AZTECH Wire
$18.608
Ampacity Inc.
$258.000
Semicontronic
$932.000
$908.700
$904.040
Argo Parts USA
Continental Prestige Electronics
Corphita
Bastille Electronics
Surface mount technology allows for efficient and compact placement of the IC on a PCB, making it ideal for space-constrained applications.
Rectangular package shape provides easy handling and alignment during assembly, improving the overall reliability of the product.
High number of terminals allow for versatile connectivity options, enabling the IC to be used in a wide range of telecom interface applications.
Grid array package style offers enhanced thermal and electrical performance, ensuring stable operation in demanding industrial environments.
High maximum operating temperature tolerance ensures reliable performance even in high-temperature conditions, increasing the product's longevity.
Wide operating temperature range from -40°C to 85°C allows the IC to function effectively in both extreme cold and hot environments.
Industrial-grade temperature rating indicates that the IC is designed to withstand harsh industrial environments, ensuring reliable operation under tough conditions.
Low nominal supply voltage of 1.85V reduces power consumption and heat dissipation, making it energy-efficient and suitable for portable or battery-operated devices.
Other Function Telecom Interface ICs RS9116W-DB00-CC1-X11 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Position:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
LM2893M
Texas Instruments
LM2893M by Texas Instruments is a telecom IC with 20 terminals in a small outline package. It operates b/w -40°C to 85°C, suitable for industrial use. With a nominal voltage of 18V, it is designed for telecom circuit applications.
BG95M3LA-64-SGNS
Quectel Wireless Solutions
BG95M3LA-64-SGNS by Quectel Wireless Solutions is a telecom IC with 1.119 Mbps data rate, operating at -35 to 75 °C. It has 102 terminals, measures 19.9mm in width, and is suitable for commercial extended temperature grade applications.
BT832
Fanstel
BT832 by Fanstel is a surface mount telecom IC with 40 terminals. Operating temperature range of -40 to 85°C, suitable for industrial applications. Features data rate of 1 Mbps, ideal for telecom circuit interfaces.
PN5120A0HN1/C2,118
NXP Semiconductors
NXP Semiconductors PN5120A0HN1/C2,118 is a telecom IC with 32 terminals in a square chip carrier package. Operating at -30 to 85°C, it supports power supplies of 1.8/3.3V and 2.5/3.3V for various applications requiring surface mount technology and moisture sensitivity level of 1.
XB3-24Z8UT-J
Digi International
The Digi International XB3-24Z8UT-J is an industrial-grade telecom circuit with 20 terminals in a through-hole package. It operates b/w -40°C to 85°C, making it suitable for various telecom interface applications. Its dual terminal position and microelectronic assembly style enhance its functionality in telecommunications systems.
MWCT1001AVLH
Freescale Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: QFP; Package Shape: SQUARE;
CL4490-1000-232
Laird Technologies
RF AND BASEBAND CIRCUIT;
SA602AD
SA602AD by NXP Semiconductors is a telecom interface IC with 8 terminals, operating temperature range of -40 to 85°C. It features a small outline package style, gull wing terminal form, and nominal voltage of 6V. Ideal for telecom circuits in industrial applications.
BGM11S22F256GA-V2
Silicon Labs
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e4; Terminal Finish: NICKEL GOLD;
RN4678-V/RM113
RN4678-V/RM113 by Microchip Tech is a surface mount telecom IC with 33 terminals in a rectangular package. Operating temp range from -20 to 70°C, nominal voltage of 1.9V. Ideal for telecom circuits due to its compact size and gold over nickel terminal finish.
TDA5200XUMA1
Infineon Technologies
TDA5200XUMA1 by Infineon is a telecom IC with 28 terminals, operating from -40 to 85°C. It has a small outline package style, Gull Wing terminal form, and 5V supply voltage. Ideal for telecom circuits, it is surface mountable and has a moisture sensitivity level of 3.
453-00059R
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
AD73311ARSZ
AD73311ARSZ by Analog Devices is a 16-bit linear coding telecom IC with 20 terminals in a small outline package. It operates b/w -40 to 85°C, with nominal voltage of 3V and max gain tolerance of 1dB. Ideal for telecom circuits, this CMOS technology device features a filter and matte tin terminal finish.
SN65DSI86IPAPRQ1
SN65DSI86IPAPRQ1 by Texas Instruments is a telecom interface IC with 64 terminals in a square package. It operates b/w -40 to 85°C, with terminal finish of NiPdAu. This IC has a nominal voltage of 1.2V and is suitable for industrial temperature grade applications.
AD9832BRUZ-REEL7
AD9832BRUZ-REEL7 by Analog Devices is a Telecom Interface IC with 16 terminals. It operates b/w -40 to 85°C, consuming 5mA at 3.3V. This CMOS technology-based IC is ideal for telecom circuits due to its small outline and dual terminal position.
TUSB211RWBR
TUSB211RWBR by Texas Instruments is a telecom IC with data rate of 480.24 Mbps, operating at 3.3V. It features a package style of CHIP CARRIER and terminal finish of NiPdAu, suitable for telecom circuit applications requiring low supply current and high-speed data transmission up to 70°C.
CYBLE-022001-00
Cypress Semiconductor
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3;
BG95M5LA-64-SGNS
BG95M5LA-64-SGNS by Quectel Wireless Solutions is a telecom IC with 1.119 Mbps data rate, operating at -35 to 75 °C. Its compact rectangular design with 102 terminals makes it suitable for various telecom applications requiring a nominal voltage of 3.8 V.
BLUENRG-M0L
STMicroelectronics
BLUENRG-M0L by STMicroelectronics is a telecom IC with 11 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 1.27mm. This surface-mount rectangular package is ideal for industrial applications requiring reliable telecom circuit interfaces.
NCH-RSL10-101Q48-ABG
NCH-RSL10-101Q48-ABG by Onsemi is a telecom interface IC with 48 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, with matte tin finish and no lead terminal form. It has a data rate of 2 Mbps and nominal voltage of 1.25V, suitable for industrial telecom circuit applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RS9116W-DB00-CC1-B2A
RS9116W-SB00-B00-B2A
TELECOM CIRCUIT;
RS9116N-DB00-CC1-B00
RS9116W-DB00-CC1-X23
Silicon Labs RS9116W-DB00-CC1-X23 is a telecom IC with 107 terminals, operating from -40 to 85°C. It has a nominal voltage of 1.85V and is designed for industrial applications requiring a surface-mount grid array package shape.
RS9116N-DB00-CC0-B00
RS9116W-DB00-CC1-B2B
RS9116W-SB00-QMS-B2A
RS9116W-SB00-B00
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 126; Package Code: LGA; Package Shape: RECTANGULAR;
Redpine Signals
RS9116W-DB00-CC0-B24
RS9116W-SB00-QMS-B24
RS9116W-SB00-B00-X23
RS9116W-DB00-CC1
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 107; Package Code: LGA; Package Shape: RECTANGULAR;
Silicon Labs' RS9116W-DB00-CC1 is a telecom IC with 107 terminals, operating from -40 to 85°C. It has a nominal voltage of 1.85V and is surface-mountable in industrial applications. The package style is grid array, making it suitable for various telecom circuit interfaces.
RS9116W-SB00-AA1-X2A
RS9116W-DB00-CC0-B2A
RS9116N-SB00-B00-B00
RS9116N-SB00-AA1-X00
RS9113-NB0-D1C
Silicon Labs' RS9113-NB0-D1C is a telecom IC with 54 Mbps data rate, operating at -40 to 85°C. With 79 terminals in a rectangular package of 16x27 mm, it's ideal for industrial applications requiring a surface-mount solution.
RS9116W-DB00-CC0-X12
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 173; Package Code: LGA; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved