Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MICROPROCESSOR CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
Median Price
$13.580
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$10.344
1k+ parts
$9.146
10k+ parts
-
Digiode
$12.208
Vyrian
$12.850
Corohmni
$8.033
Corphita
$11.565
Advanced Electronics
$31.661
$28.812
$25.962
QUARKTWIN TECHNOLOGY LTD
Other Function uPs,uCs & Peripheral ICs EM3591-RTR attributes and parameters. Explore more Other Function uPs,uCs & Peripheral ICs devices from Silicon Labs
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Peripheral IC Type:
EM3591-RTR Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATECC608B-SSHDA-B
Microchip ATECC608B-SSHDA-B is a cryptographic authenticator IC with I2C bus compatibility. It operates b/w -40 to 85°C, has 8 terminals, and supports supply voltage from 2V to 5.5V. Ideal for secure applications in industrial settings due to its compact size and CMOS technology.
NT3H2111W0FT1X
MICROPROCESSOR CIRCUIT; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
ESP32-WROOM-32UE-N4
Espressif Systems (Shanghai)
ESP32-WROOM-32UE-N4 by Espressif Systems is a 38-terminal SoC with CMOS technology. It operates b/w -40 to 85°C, with supply voltage range of 3-3.6V. Ideal for IoT applications due to its compact size and surface mount capability.
MCIMX6Q6AVT10AER
MCIMX6Q6AVT10AER by NXP Semiconductors is a 624-terminal SoC with CMOS technology. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 1.35V to 1.5V and peak reflow temp of 260C, it's ideal for various uP/uC functions in surface-mount designs.
XCZU11EG-2FFVF1517E
Xilinx
XCZU11EG-2FFVF1517E by Xilinx is a MICROPROCESSOR CIRCUIT with CMOS technology. It has 1517 terminals in a GRID ARRAY package style, measuring 40x40 mm. Operating b/w 0-100°C, it requires a supply voltage of 0.825-0.876 V and can withstand peak reflow at 245°C for up to 30s.
TW8804-LC3-GRSH
Intersil
Other uPs/uCs/Peripheral ICs;
XC7Z010-L1CLG400I
XC7Z010-L1CLG400I by Xilinx is a 400-terminal System on Chip with CMOS technology. It operates b/w -40°C to 100°C, with supply voltage ranging from 0.95V to 1.05V. This low-profile, fine-pitch IC is ideal for applications requiring high-performance computing in compact spaces.
MCIMX6Q6AVT10AC
MCIMX6Q6AVT10AC by NXP Semiconductors is a SYSTEM ON CHIP with CMOS technology. It operates b/w -40 to 125 °C, with supply voltage range of 1.35V to 1.5V. Ideal for automotive applications due to its fine pitch grid array package style and 624 terminals in a square shape.
Z84C4006PEG
Zilog
Other uPs/uCs/Peripheral ICs; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
CY8C6247BZI-D34
CY8C6247BZI-D34 by Infineon Technologies is a 124-terminal, programmable SoC with CMOS technology. It operates b/w -40 to 85 °C and has a supply voltage range of 1.7V to 3.6V. This IC is ideal for applications requiring a compact form factor and high performance in various electronic devices.
TMS320DM368ZCED48F
Texas Instruments
TMS320DM368ZCED48F by Texas Instruments is a 32-bit microprocessor with 338 terminals, operating at -40 to 85°C. It features a max supply voltage of 1.42V and supports I2C, SPI, UART, and USB buses. Ideal for industrial applications requiring a low-profile package with fine pitch grid array style.
MCIMX6Q7CVT08AC
MCIMX6Q7CVT08AC by NXP Semiconductors is a 624-terminal SoC with CMOS technology. It operates b/w -40 to 105 °C, with supply voltage range of 1.275V to 1.5V. Ideal for industrial applications requiring fine pitch grid array package style.
AR1100T-I/MQ
Microchip Technology's AR1100T-I/MQ is a CMOS microprocessor circuit with 20 terminals in a square chip carrier package. It operates b/w -40 to 85 °C, with supply voltage range of 3.135V to 3.465V. Ideal for industrial applications requiring very thin profile and heat sink compatibility.
NRF52832-QFAA-R
Nordic Semiconductor Asa
NRF52832-QFAA-R by Nordic Semiconductor Asa is a 48-terminal SoC with CMOS technology. It operates b/w -40 to 85 °C and supports supply voltage range of 1.7V to 3.6V. Ideal for applications requiring low-profile, surface-mount chips in compact devices.
SLB9670XQ20FW740XUMA2
SLB9670XQ20FW740XUMA2 by Infineon Technologies is a cryptographic authenticator IC with CMOS technology. It operates b/w -40 to 85 °C and has a supply voltage range of 1.65V to 1.95V, making it suitable for industrial applications requiring secure authentication processes. This chip carrier package with very thin profile and bottom terminal position is surface mountable, featuring 32 terminals in a square shape measuring 5mm x 5mm.
AX-SFUS-1-01-TB05
AX-SFUS-1-01-TB05 by Onsemi is a CMOS MICROPROCESSOR CIRCUIT with 40 terminals in a RECTANGULAR CHIP CARRIER package. It operates b/w -40 to 85 °C, with supply voltage range of 1.8V to 3.6V, making it ideal for industrial applications requiring high performance and reliability.
CY8C3866AXI-039
Cypress Semiconductor
PROGRAMMABLE SoC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
ATECC608A-SSHDA-T
Microchip ATECC608A-SSHDA-T is a cryptographic authenticator IC with 8 terminals, CMOS technology, and 2-5.5V supply voltage range. Ideal for industrial applications, it operates b/w -40 to 85°C and features TS16949 screening level for secure communication systems.
P82B715DRG4
P82B715DRG4 by Texas Instruments is an 8-terminal peripheral IC with a clock frequency of 0.4 MHz, suitable for industrial applications. It operates b/w -40 to 85°C, supports I2C bus compatibility, and has a supply voltage range of 4.5V to 12V. Ideal for microprocessor circuits requiring small outline packaging.
MIMXRT117HCVM8A
The NXP Semiconductors MIMXRT117HCVM8A is a low-profile, fine-pitch SoC with 289 terminals in a square package. Operating b/w -40°C to 105°C, it has a supply voltage range of 1.1V to 1.15V. Ideal for applications requiring high-performance microcontrollers in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved