Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CP2102-GM by Silicon Labs is a 28-terminal BUS CONTROLLER with 3.3V power supply, suitable for UNIVERSAL SERIAL BUS applications. It operates b/w -40 to 85°C, in a compact SQUARE package style measuring 5x5mm, ideal for industrial use.
Median Price
$8.206
Lifecycle Status
Suppliers In-Stock
45
In-Stock Inventory
1k+
Symmetry
1+ parts
$5.190
100+ parts
-
1k+ parts
10k+ parts
Farnell
$7.720
$5.080
$4.940
Chip1Stop
$8.423
$7.610
$5.730
$5.120
Newark
$8.490
$6.230
$5.970
DigiKey
$11.070
$7.302
$6.641
$6.481
Element14
$13.610
$8.970
$8.700
RS (Exports)
$7.983
Arrow
$5.210
Verical
TME
$4.670
$3.210
$2.920
Digiode
$4.930
Component Electronics Inc.
$5.380
$4.040
$3.500
Nova Conductors
$5.789
Bristol Electronics
$9.690
$4.554
$4.167
Chip Stock
Microfarads
Vyrian
Maritex
Schukat
$6.994
$5.902
K-1 Technologies
ComSIT Distribution GmbH
ComSIT USA
Atlantic Semiconductor
Zilex Electronics Inc.
Semi Source
QIE Inc.
SPM Sales
Contempo Components LLC
Prism Electronics
Elcom Components
ACDS - Activité Composants Distribution Service
NPI Materials, Inc.
Whistler Technology
Sensible Micro Corp
Sea View Technologies
NAC Semi
LWI Electronics Inc
North Shore Components
Technoshack Inc.
Sunrise Surplus Inc.
Speed Components Ltd
GSS - Global Semi Support
Cogito LLC
DF Sales Co.
Semicontronic
$4.410
$4.300
$4.278
Ampacity Inc.
Corphita
$4.671
Continental Prestige Electronics
$5.670
$4.600
Aranea Global
$5.673
$5.446
Advanced Electronics
$20.925
$19.879
Microchip USA
$26.570
$26.190
$26.000
$25.810
Corohmni
$66.634
Aztec Data Supply Inc.
$75.863
S.R.D Solutions
RC Electronics
Alle Elektronik GmbH
Lixinc
Assy Fe
Futuretech Components
Allen Electronics Distributors
Robosynatics
Lucentia Tech
$6.549
Modulus Dynamics
Infinite Electronics LLP (Excess)
Argo Parts USA
Kepictronics
EMSNET (Excess)
GreenTree Electronics
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
Speed Components Ltd (Excess)
Surface mount technology allows for easy and efficient integration onto circuit boards, saving space and making assembly process smoother.
With a maximum supply voltage of 3.6V, this bus controller can handle higher power requirements and operate reliably under varying load conditions.
The square package shape offers uniformity and symmetry, making it easier to place and secure on the circuit board.
The 3.3V power supply ensures compatibility with a wide range of existing systems and devices, enhancing versatility and ease of integration.
With a high number of terminals, this bus controller can support multiple input/output connections, enabling complex data handling and communication capabilities.
The combination of chip carrier, heat sink/slug, and very thin profile package styles offer efficient heat dissipation, compact form factor, and reliability in operation.
The minimum supply voltage of 3V ensures compatibility with low-power applications while still providing reliable performance and functionality.
With a high maximum operating temperature of 85°C, this bus controller can operate in harsh environments and withstand elevated temperatures without compromising performance.
The low minimum operating temperature of -40°C ensures reliable operation even in cold conditions, making it suitable for a wide range of applications.
The matte tin finish provides corrosion resistance and enhances solderability, ensuring long-term performance and durability of the bus controller.
The quad terminal position allows for easy and secure connection to external devices, reducing the risk of loose connections and ensuring stable data transmission.
With a maximum seated height of 1mm, this bus controller occupies minimal space on the circuit board, enabling compact and streamlined design.
The 5mm width of the bus controller provides a good balance between compactness and ease of handling during assembly and installation.
The high peak reflow temperature of 260°C allows for reliable soldering during the assembly process, ensuring strong and durable connections.
With a length of 5mm, this bus controller offers a compact footprint, making it suitable for space-constrained applications without sacrificing functionality.
The industrial temperature grade ensures reliable operation in demanding industrial environments, where temperature fluctuations and harsh conditions are common.
The peripheral IC type as a bus controller for Universal Serial Bus (USB) ensures seamless communication and data transfer between devices, enhancing connectivity and compatibility.
The CMOS technology used in this bus controller offers low power consumption, high speed, and compatibility with a wide range of devices, making it an efficient and versatile choice.
The no lead terminal form simplifies assembly and reduces the risk of solder-related issues, ensuring quick and reliable integration into the circuit board.
The nominal supply voltage of 3.3V provides stable and consistent power delivery, ensuring reliable performance and enhanced system compatibility.
The terminal pitch of 0.5mm allows for high-density packaging and efficient use of space on the circuit board, making it suitable for compact and complex electronics designs.
Bus Controllers CP2102-GM attributes and parameters. Explore more Bus Controllers devices from Silicon Labs
Address Bus Width:
External Data Bus Width:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
CP2102-GM Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Assembly/Origin - Site Change 18/Jan/2022
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148-GS08
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
USB2412-DZK-TR
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE;
CYUSB3014-BZXCT
Infineon Technologies
CYUSB3014-BZXCT by Infineon: 375 MBps data rate, 52 MHz clock freq, 32-bit bus width. Ideal for USB bus control in commercial applications with I2C, I2S, SPI, UART compatibility.
FT601Q-T
FTDI
FT601Q-T by FTDI is a surface mount bus controller with 76 terminals. It operates at a voltage range of 0.9V to 1.1V and has a max data transfer rate of 625 MBps. This chip is commonly used as a USB bus controller in industrial applications.
TUSB8042RGCT
Texas Instruments
TUSB8042RGCT by Texas Instruments is a 64-terminal chip carrier with CMOS technology. It operates b/w 0-70°C, compatible with I2C and SMBUS buses. The bus controller has a supply voltage range of 0.99-1.26V, making it ideal for commercial applications requiring USB connectivity in compact spaces.
CYUSB2304-68LTXI
Cypress Semiconductor
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 68; Package Code: HVQCCN; Package Shape: SQUARE;
CP2105-F01-GMR
Silicon Labs
CP2105-F01-GMR by Silicon Labs is a BUS CONTROLLER with UART compatibility. It operates b/w -40 to 85 °C, supporting RS232 and RS485 interfaces. With a data rate of 1.5 MBps, it's ideal for industrial applications requiring low-profile SQUARE packaging.
ISP1581BD-S
NXP Semiconductors
ISP1581BD-S by NXP Semiconductors is a Bus Controller with 8-bit Address Bus Width, 12.5 MBps Data Transfer Rate, and 12 MHz Clock Frequency. Ideal for industrial applications requiring USB connectivity, it operates b/w -40 to 85 °C with a supply voltage range of 3-3.6 V.
TSI109-200ILY
Renesas Electronics
BUS CONTROLLER, PCI; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 1023; Package Code: BGA; Package Shape: SQUARE;
TUSB3210PM
TUSB3210PM by Texas Instruments is a 64-terminal bus controller with 3.3V power supply, operating at temperatures from 0 to 70°C. It features a max clock frequency of 12MHz and supports USB peripheral ICs. Ideal for applications requiring low-profile, fine-pitch package styles in commercial-grade environments.
CY7C65213-32LTXIT
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
USB2533I-1080AEN
Microchip Technology
Microchip Technology's USB2533I-1080AEN is a BUS CONTROLLER with 36 terminals, CMOS technology, and operates at up to 24 MHz clock frequency. It supports I2C, SMBUS, and USB bus compatibility. Ideal for industrial applications requiring high data transfer rates up to 0.0125 MBps.
CP2102-GMR
CP2102-GMR by Silicon Labs is a 28-terminal BUS CONTROLLER with 3.3V power supply, suitable for UNIVERSAL SERIAL BUS applications. It operates b/w -40 to 85°C, in a compact SQUARE package measuring 5x5mm and requiring a min supply voltage of 3V.
CYUSB3304-68LTXI
USB5807CT-I/KD
USB5807CT-I/KD by Microchip Technology is a BUS CONTROLLER with 625 MBps data transfer rate, 25 MHz clock frequency, and 1.2 V nominal voltage. Ideal for I2C, SMBUS, SPI, and USB bus compatibility applications in industrial settings due to its compact size and low power consumption.
PM8575B-FEI
Microchip Technology's PM8575B-FEI is a bus controller IC with 1311 terminals, operating from -40 to 105°C. It supports data transfer rates up to 174000 MBps and interfaces with I2C, PCI, SMBUS, and UART buses. Ideal for applications requiring high-speed data processing and control in various electronic systems.
CY7C68013A-128AXI
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: LFQFP; Package Shape: RECTANGULAR;
FT311D-32L1C-R
FTDI's FT311D-32L1C-R is a 32-terminal bus controller with 3.3V power supply, suitable for automotive applications. It supports I2C, SPI, USB, and VBUS buses with a terminal pitch of 0.8mm. Operating temperature ranges from -40 to 125°C in a low-profile flatpack package style.
FT201XQ-T
FTDI's FT201XQ-T is a bus controller with 16 terminals, operating at -40 to 85 °C. It supports I2C, UART, and USB buses with a data transfer rate of 0.425 MBps. The chip carrier package style has a square shape, measuring 4x4 mm in size and requiring a supply voltage of 3-5 V for usage in various applications.
USB2513BT/M2
USB2513BT/M2 by Microchip Technology is a bus controller with a max clock frequency of 24 MHz. It is used for I2C, SMBUS, and USB bus compatibility. Its compact size (6mm x 6mm) and low supply voltage (3V to 3.6V) make it suitable for various applications requiring universal serial bus connectivity.
USB3320C-EZK
Microchip Technology's USB3320C-EZK is a 32-terminal BUS CONTROLLER IC with 60 MHz clock frequency. It operates b/w -40 to 85 °C, compatible with USB bus, and has a package style of CHIP CARRIER. Ideal for applications requiring low voltage supply and high-speed data transfer over USB interface.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XR21B1420IL28-F
Maxlinear Inc
Maxlinear's XR21B1420IL28-F is a Serial Communication Controller with 1.5 MBps data rate, UART and USB bus compatibility, and low power mode. Ideal for industrial applications, it operates b/w -40 to 85 °C with a supply voltage range of 3-3.6 V.
CP2102N-A02-GQFN28R
Silicon Labs' CP2102N-A02-GQFN28R is a bus controller with UART compatibility, operating at 3.3V. It offers a max data transfer rate of 1.5 MBps and supports RS232/RS485 interfaces. Ideal for industrial applications requiring reliable serial communication in compact spaces.
CP2102N-A02-GQFN24R
CP2102N-A02-GQFN24R by Silicon Labs is a BUS CONTROLLER with UART compatibility. It operates b/w -40 to 85 °C, supporting data rates up to 1.5 MBps. Ideal for RS232 and RS485 drive interfaces in industrial applications.
CP2102N-A02-GQFN28
Silicon Labs' CP2102N-A02-GQFN28 is a bus controller with UART compatibility. It operates b/w -40 to 85°C, supporting data rates up to 1.5 MBps. Ideal for industrial applications requiring RS232/RS485 interfaces in a compact 28-terminal chip carrier package.
CP2102N-A02-GQFN24
Silicon Labs' CP2102N-A02-GQFN24 is a BUS CONTROLLER with UART compatibility. It operates b/w -40 to 85 °C, supporting data rates up to 1.5 MBps. This SQUARE chip carrier package has 24 terminals and a low profile suitable for industrial applications.
CP2102N-A02-GQFN20
Silicon Labs' CP2102N-A02-GQFN20 is a bus controller with UART compatibility. It operates b/w -40 to 85 °C, supporting data rates up to 1.5 MBps. This chip carrier has 20 terminals in a square package, ideal for industrial applications requiring RS232 and RS485 interfaces.
CP2102N-A02-GQFN20R
Silicon Labs' CP2102N-A02-GQFN20R is a UART bus controller with 20 terminals, operating at 3.3V nominal voltage. It supports RS232 and RS485 drive interfaces, achieving data rates up to 1.5 MBps. Ideal for industrial applications requiring reliable USB connectivity in a compact square package with a low profile design.
CP2105-F01-GM
Silicon Labs CP2105-F01-GM is a BUS CONTROLLER with UART compatibility. It operates at 48 MHz clock frequency, supporting data transfer rates up to 1.5 MBps. Ideal for industrial applications due to its -40 to 85 °C operating temperature range and low 0.8 mm seated height.
CP2104-F03-GMR
CP2104-F03-GMR by Silicon Labs is a bus controller with 24 terminals, operating at 3.3V. It has a max supply current of 18.728mA and operates in industrial temperature range (-40 to 85°C). Ideal for applications requiring surface mount square package with matte tin finish.
CP2102N-A01-GQFN28R
Silicon Labs' CP2102N-A01-GQFN28R is a Bus Controller with 28 terminals, operating at -40 to 85 °C. It supports data rates up to 1.5 MBps and has a supply voltage range of 3-3.6 V. Ideal for industrial applications requiring UART, RS232, or RS485 interfaces in a compact 0.8 mm package.
CP2103-GMR
CP2103-GMR by Silicon Labs is a 28-terminal BUS CONTROLLER with 3-3.6V supply range, -40 to 85°C operating temp, and 260°C peak reflow. Ideal for industrial applications requiring UNIVERSAL SERIAL BUS peripheral ICs in a compact SQUARE package style.
CP2102N-A01-GQFN24
Silicon Labs' CP2102N-A01-GQFN24 is a bus controller with UART and VBUS compatibility. It operates at 3-3.6V, supports data rates up to 1.5 MBps, and has a temperature range of -40 to 85°C. Ideal for industrial applications requiring RS232/RS485 interfaces in a compact 4x4mm chip carrier package.
CP2104-F03-GM
Silicon Labs CP2104-F03-GM is a bus controller with 3.3V power supply, 1.5 MBps data rate, and 48 MHz clock frequency. Ideal for USB peripheral IC applications in industrial settings due to its compact square package and wide temperature range (-40 to 85°C).
CP2102N-A01-GQFN20
Silicon Labs' CP2102N-A01-GQFN20 is a bus controller with 20 terminals, operating voltage of 3-3.6V, and data transfer rate up to 1.5 MBps. It is used in industrial applications requiring UART and VBUS compatibility, with drive interface standards RS232 and RS485.
CP2103-GM
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE;
CP2102N-A01-GQFN28
Silicon Labs' CP2102N-A01-GQFN28 is a bus controller with UART and VBUS compatibility. It operates b/w -40 to 85°C, supporting data rates up to 1.5 MBps. This CMOS technology chip carrier has 28 terminals in a square package, ideal for industrial applications requiring RS232/RS485 interfaces.
CP2108-B03-GMR
CP2108-B03-GMR by Silicon Labs is a BUS CONTROLLER with UART compatibility. It operates at 3-3.6V, supports RS232/RS485 interfaces, and has a max data rate of 1.5 MBps. Ideal for industrial applications requiring high-speed USB connectivity in compact spaces.
CP2102N-A01-GQFN24R
Silicon Labs' CP2102N-A01-GQFN24R is a bus controller with 24 terminals, operating at 3-3.6V, supporting UART and VBUS buses. It offers a data transfer rate of 1.5 MBps, suitable for industrial applications with an operating temperature range of -40 to 85°C. The chip carrier package has a very thin profile and no lead terminal form, making it ideal for compact designs requiring RS232/RS485 interfaces.
CP2101-TB
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: VQCCN; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved