Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' CP2102N-A02-GQFN28 is a bus controller with UART compatibility. It operates b/w -40 to 85°C, supporting data rates up to 1.5 MBps. Ideal for industrial applications requiring RS232/RS485 interfaces in a compact 28-terminal chip carrier package.
Median Price
$4.508
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Symmetry
1+ parts
$2.300
100+ parts
-
1k+ parts
$2.100
10k+ parts
Chip1Stop
$3.486
$2.132
$2.113
Mouser Electronics
$4.670
$2.830
$2.550
$2.460
Newark
$5.030
$3.180
$3.110
DigiKey
$5.100
$3.283
$2.955
$2.791
Farnell
$5.210
$3.020
$2.170
Element14
$8.380
$4.860
$3.490
RS (Exports)
$4.346
$4.116
Arrow
$2.086
Verical
$2.099
Digiode
$1.596
Mobius Materials
$2.410
$1.920
Nova Conductors
$3.630
Ozdisan Elektronik
$10.082
Chip Stock
Semtec, LLC
Vyrian
K-1 Technologies
Schukat
$4.358
$3.685
Bristol Electronics
Atlantic Semiconductor
Micros
$3.277
Partservice
$3.166
Micros sp.j. W. Kędra i J. Lic
$3.391
Elcom Components
Semicontronic
$1.430
$1.394
$1.387
Ampacity Inc.
Corphita
$1.512
Argo Parts USA
$3.145
Netroflash
$3.449
$3.376
Modulus Dynamics
$4.029
$3.989
$3.868
Continental Prestige Electronics
$4.460
$2.790
$2.150
Microchip USA
$30.875
Corohmni
$62.815
Advanced Electronics
$71.342
$67.775
Aztec Data Supply Inc.
$83.047
RC Electronics
Lixinc
Futuretech Components
Allen Electronics Distributors
$3.815
Alle Elektronik GmbH
Legend Electronics Inc. (Excess)
Robosynatics
Lucentia Tech
$0.141
Formix International (Excess)
Surface mount technology allows for easy integration onto circuit boards, saving space and reducing assembly time.
Can handle a wide range of supply voltages, providing flexibility in power source options.
Square package shape is efficient for space utilization on PCBs and allows for uniform layout.
Sufficient number of terminals for connecting various components and peripherals to the bus controller.
High data transfer rate enables quick and efficient communication between devices connected to the bus controller.
Industrial temperature range ensures reliable operation in harsh environmental conditions.
Supports the popular USB interface, making it compatible with a wide range of devices and systems.
Support for multiple drive interface standards allows for versatile connectivity options in different applications.
Bus Controllers CP2102N-A02-GQFN28 attributes and parameters. Explore more Bus Controllers devices from Silicon Labs
Address Bus Width:
Bus Compatibility:
Maximum Data Transfer Rate:
Drive Interface Standard:
External Data Bus Width:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Peripheral IC Type:
CP2102N-A02-GQFN28 Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Design/Specification - CP2102N 20/Oct/2020 Mult Dev Datasheet Chgs 24/Nov/2020
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CMX
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
EU2B-YS3203F
Idec
ROTARY SWITCH;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
USB2513B-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
PCA9542APW
Philips Semiconductors
Bus Controllers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
CY7C65631-56LTXIT
Cypress Semiconductor
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
CY7C65213-28PVXIT
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
CYUSB3610-68LTXC
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 68; Package Code: HVQCCN; Package Shape: SQUARE;
CYPD4226-40LQXIT
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Terminal Pitch: .5 mm;
CP2102N-A02-GQFN28
Silicon Labs
PI7C9X2G608GPANJEX
Pericom Semiconductor
BUS CONTROLLER, PCI; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 196; Package Code: BGA; Package Shape: SQUARE;
CY7C65630-56LTXI
CP2109-A01-GMR
Silicon Labs' CP2109-A01-GMR is a 28-terminal bus controller with 3.3V supply voltage, ideal for industrial applications. This chip carrier package has a square shape and operates in temperatures ranging from -40°C to 85°C. Suitable for surface mount assembly, it is designed for use in various electronic devices requiring reliable data communication.
FT4222HQ-B-T
FTDI
FTDI's FT4222HQ-B-T is a bus controller with 32 terminals, supporting I2C, SPI, and VBUS. It operates b/w -40 to 85 °C with a clock frequency of 12 MHz. Ideal for industrial applications requiring high-speed data transfer up to 60 MBps.
SC18IS602BIPW,128
NXP Semiconductors
NXP Semiconductors' SC18IS602BIPW,128 is a bus controller with 16 terminals, operating at 2.4-3.6V and clocking up to 18MHz. It features I2C technology, suitable for industrial applications requiring low power consumption and compact design in a small outline package.
USB2514-HZH
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
USB2534I-1050AEN
The Microchip Technology USB2534I-1050AEN is a BUS CONTROLLER IC with 36 terminals, operating at 24 MHz clock frequency. It supports I2C, SMBUS, UART, and USB bus compatibility with a data transfer rate of 0.0125 MBps. Ideal for industrial applications due to its wide temperature range (-40 to 85 °C) and TS 16949 screening level.
TUSB9261IPVP
TUSB9261IPVP by Texas Instruments is a BUS CONTROLLER with 64 terminals, operating at -40 to 85 °C. It supports ATA and ATAPI bus compatibility, with a max data transfer rate of 375 MBps. Ideal for industrial applications requiring USB peripheral ICs.
CY7C65215-32LTXI
Infineon Technologies
CY7C65215-32LTXI by Infineon is a bus controller with 32 terminals, operating at 3.15-3.45V, and clock frequency up to 48.96MHz. It is used in industrial applications requiring USB peripheral control, featuring I2C compatibility and a compact square package style of 5x5mm for surface mounting.
CP2102N-A02-GQFN24R
CP2102N-A02-GQFN24R by Silicon Labs is a BUS CONTROLLER with UART compatibility. It operates b/w -40 to 85 °C, supporting data rates up to 1.5 MBps. Ideal for RS232 and RS485 drive interfaces in industrial applications.
CYPD3174-16SXQT
CYPD3174-16SXQT by Infineon Technologies is a small outline bus controller with 16 terminals, operating at 48 MHz clock frequency. It supports I2C, SPI, UART, and USB buses with data transfer rate of 0.125 MBps. Ideal for applications requiring universal serial bus peripheral ICs in compact designs.
FT4222HQ-C-T
FTDI's FT4222HQ-C-T is a versatile bus controller with 32 terminals, supporting I2C, SPI, and VBUS. It operates b/w -40 to 85°C with a clock frequency of 12 MHz and data transfer rate up to 60 MBps. Ideal for industrial applications requiring high-speed communication in compact designs.
CP2102N-A01-GQFN24
Silicon Labs' CP2102N-A01-GQFN24 is a bus controller with UART and VBUS compatibility. It operates at 3-3.6V, supports data rates up to 1.5 MBps, and has a temperature range of -40 to 85°C. Ideal for industrial applications requiring RS232/RS485 interfaces in a compact 4x4mm chip carrier package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CP2102-GMR
CP2102-GMR by Silicon Labs is a 28-terminal BUS CONTROLLER with 3.3V power supply, suitable for UNIVERSAL SERIAL BUS applications. It operates b/w -40 to 85°C, in a compact SQUARE package measuring 5x5mm and requiring a min supply voltage of 3V.
CP2102-GM
CP2102-GM by Silicon Labs is a 28-terminal BUS CONTROLLER with 3.3V power supply, suitable for UNIVERSAL SERIAL BUS applications. It operates b/w -40 to 85°C, in a compact SQUARE package style measuring 5x5mm, ideal for industrial use.
CP2102N-A02-GQFN28R
Silicon Labs' CP2102N-A02-GQFN28R is a bus controller with UART compatibility, operating at 3.3V. It offers a max data transfer rate of 1.5 MBps and supports RS232/RS485 interfaces. Ideal for industrial applications requiring reliable serial communication in compact spaces.
CP2102N-A02-GQFN24
Silicon Labs' CP2102N-A02-GQFN24 is a BUS CONTROLLER with UART compatibility. It operates b/w -40 to 85 °C, supporting data rates up to 1.5 MBps. This SQUARE chip carrier package has 24 terminals and a low profile suitable for industrial applications.
CP2102N-A02-GQFN20
Silicon Labs' CP2102N-A02-GQFN20 is a bus controller with UART compatibility. It operates b/w -40 to 85 °C, supporting data rates up to 1.5 MBps. This chip carrier has 20 terminals in a square package, ideal for industrial applications requiring RS232 and RS485 interfaces.
CP2102N-A02-GQFN20R
Silicon Labs' CP2102N-A02-GQFN20R is a UART bus controller with 20 terminals, operating at 3.3V nominal voltage. It supports RS232 and RS485 drive interfaces, achieving data rates up to 1.5 MBps. Ideal for industrial applications requiring reliable USB connectivity in a compact square package with a low profile design.
CP2105-F01-GMR
CP2105-F01-GMR by Silicon Labs is a BUS CONTROLLER with UART compatibility. It operates b/w -40 to 85 °C, supporting RS232 and RS485 interfaces. With a data rate of 1.5 MBps, it's ideal for industrial applications requiring low-profile SQUARE packaging.
CP2105-F01-GM
Silicon Labs CP2105-F01-GM is a BUS CONTROLLER with UART compatibility. It operates at 48 MHz clock frequency, supporting data transfer rates up to 1.5 MBps. Ideal for industrial applications due to its -40 to 85 °C operating temperature range and low 0.8 mm seated height.
CP2104-F03-GMR
CP2104-F03-GMR by Silicon Labs is a bus controller with 24 terminals, operating at 3.3V. It has a max supply current of 18.728mA and operates in industrial temperature range (-40 to 85°C). Ideal for applications requiring surface mount square package with matte tin finish.
CP2102N-A01-GQFN28R
Silicon Labs' CP2102N-A01-GQFN28R is a Bus Controller with 28 terminals, operating at -40 to 85 °C. It supports data rates up to 1.5 MBps and has a supply voltage range of 3-3.6 V. Ideal for industrial applications requiring UART, RS232, or RS485 interfaces in a compact 0.8 mm package.
CP2103-GMR
CP2103-GMR by Silicon Labs is a 28-terminal BUS CONTROLLER with 3-3.6V supply range, -40 to 85°C operating temp, and 260°C peak reflow. Ideal for industrial applications requiring UNIVERSAL SERIAL BUS peripheral ICs in a compact SQUARE package style.
CP2104-F03-GM
Silicon Labs CP2104-F03-GM is a bus controller with 3.3V power supply, 1.5 MBps data rate, and 48 MHz clock frequency. Ideal for USB peripheral IC applications in industrial settings due to its compact square package and wide temperature range (-40 to 85°C).
CP2102N-A01-GQFN20
Silicon Labs' CP2102N-A01-GQFN20 is a bus controller with 20 terminals, operating voltage of 3-3.6V, and data transfer rate up to 1.5 MBps. It is used in industrial applications requiring UART and VBUS compatibility, with drive interface standards RS232 and RS485.
CP2103-GM
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE;
CP2102N-A01-GQFN28
Silicon Labs' CP2102N-A01-GQFN28 is a bus controller with UART and VBUS compatibility. It operates b/w -40 to 85°C, supporting data rates up to 1.5 MBps. This CMOS technology chip carrier has 28 terminals in a square package, ideal for industrial applications requiring RS232/RS485 interfaces.
CP2108-B03-GMR
CP2108-B03-GMR by Silicon Labs is a BUS CONTROLLER with UART compatibility. It operates at 3-3.6V, supports RS232/RS485 interfaces, and has a max data rate of 1.5 MBps. Ideal for industrial applications requiring high-speed USB connectivity in compact spaces.
CP2102N-A01-GQFN24R
Silicon Labs' CP2102N-A01-GQFN24R is a bus controller with 24 terminals, operating at 3-3.6V, supporting UART and VBUS buses. It offers a data transfer rate of 1.5 MBps, suitable for industrial applications with an operating temperature range of -40 to 85°C. The chip carrier package has a very thin profile and no lead terminal form, making it ideal for compact designs requiring RS232/RS485 interfaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved