Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: OTHER; Package Code: HVQCCN; Terminal Pitch: .5 mm; Maximum Operating Temperature: 85 Cel; External Data Bus Width: 0;
Median Price
$1.890
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Newark
1+ parts
$0.583
100+ parts
1k+ parts
-
10k+ parts
DigiKey
$1.866
Mouser Electronics
$1.810
$1.750
$1.520
Arrow
$1.891
$1.806
$1.721
$1.664
Element14
$2.670
$2.220
$2.210
Verical
Master Electronics
$1.330
$1.300
Farnell
$2.233
$2.182
Ozdisan Elektronik
$1.857
Nova Conductors
$2.299
Vyrian
Chip Stock
Electro Sonic
$1.730
IBS Electronics
$2.184
$2.071
PC Components Company LLC
Tectiva GmbH
Sensible Micro Corp
SPM Sales
Bristol Electronics
Semicontronic
$0.496
$0.484
$0.481
Argo Parts USA
$2.208
Modulus Dynamics
$2.535
$2.510
$2.434
CoreStaff
$7.440
$2.711
Aztec Data Supply Inc.
$33.052
Advanced Electronics
$51.786
$49.197
Corohmni
$61.026
RC Electronics
$2.270
$2.070
$2.010
Lixinc
Kepictronics
Fulton Briggs Corp.
Futuretech Components
Authorized Procurement Solutions
Continental Prestige Electronics
Assy Fe
Perfect Parts
Lucentia Tech
$7.520
GreenTree Electronics
Bus Controllers USB2512B-AEZG-TR attributes and parameters. Explore more Bus Controllers devices from Standard Microsystems
Additional Features:
Address Bus Width:
Bus Compatibility:
Maximum Clock Frequency:
External Data Bus Width:
Length:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Code:
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Technology:
Temperature Grade:
Terminal Pitch:
Maximum Time At Peak Reflow Temperature (s):
Width:
Peripheral IC Type:
USB2512B-AEZG-TR Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pulse Electronics
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
VNC1L-1A
FTDI's VNC1L-1A is a 48-terminal bus controller with 3.3V power supply, operating at -40 to 85°C. It features a max clock frequency of 12MHz and is ideal for industrial applications requiring USB peripheral control in compact spaces.
FT245RNL-TUBE
FTDI's FT245RNL-TUBE is a USB bus controller with 8-bit external data bus width and 60 MBps data transfer rate. It operates b/w -40 to 85 °C, supporting USB bus compatibility and CMOS technology. Ideal for applications requiring high-speed data transfer in compact designs.
FT2232D-REEL
FTDI's FT2232D-REEL is a bus controller with 48 terminals, operating at -40 to 85°C. It supports USB and I2C buses, with a max data rate of 1 MBps. Ideal for industrial applications requiring low profile, fine pitch packages.
CY7C65211-24LTXI
Cypress Semiconductor
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
USB3250-ABZJ
Microchip Technology
USB3250-ABZJ by Microchip Technology is a BUS CONTROLLER IC for USB applications. It operates at 1.6-2V with a clock frequency of 12MHz and data transfer rate of 60MBps. This CMOS technology chip has 56 terminals in a square package, suitable for USB bus compatibility.
USB3340-EZK
The Microchip Technology USB3340-EZK is a CMOS BUS CONTROLLER with 32 terminals in a SQUARE package. It operates at 1.6-2V, supports USB and VBUS compatibility, and has an 8-bit external data bus width. Ideal for applications requiring a max clock frequency of 60 MHz, such as universal serial bus peripherals.
USB5734-I/MR
USB5734-I/MR by Microchip Technology is a BUS CONTROLLER with 64 terminals, operating at -40 to 85 °C. It supports I2C, SMBUS, SPI, UART, and USB buses with a data transfer rate of 625 MBps. This CMOS technology chip has a max clock frequency of 25 MHz and is ideal for industrial applications requiring high-speed data processing.
PI7C9X2G404SLBFDE
BUS CONTROLLER, PCI; Technology: CMOS;
USB2412-DZK-TR
USB2412-DZK-TR by Microchip: 3.6V max supply, 24MHz clock freq, 65mA max current. Bus controller for USB applications with CMOS tech, 28 terminals in a square chip carrier package.
FT2232H-56Q-REEL
FTDI's FT2232H-56Q-REEL is a bus controller with 16-bit address bus width, 60 MBps data transfer rate, and 12 MHz clock frequency. Ideal for industrial applications requiring USB, SPI, UART interfacing on devices compatible with RS232/RS422/RS485 standards.
STUSB1602QTR
STUSB1602QTR by STMicroelectronics is a BUS CONTROLLER with 24 terminals, operating at 3-5.5V, and supports I2C, SPI, USB. It has a clock frequency of 0.4 MHz and data transfer rate of 0.05 MBps. Ideal for industrial applications requiring low-profile surface mount packages.
CYUSB2014-BZXI
Infineon Technologies
CYUSB2014-BZXI by Infineon is a bus controller with 32-bit external data bus width, 625 MBps data transfer rate, and 19.2 MHz clock frequency. It is ideal for industrial applications requiring USB, I2C, I2S, SPI, UART compatibility in a compact package with thin profile and fine pitch grid array design.
PM40068B1-FEI
PM40068B1-FEI by Microchip Technology is a bus controller with 1467 terminals in a square-shaped plastic/epoxy package. It is compatible with I2C, SMBUS, and UART buses and uses CMOS technology. Its terminal form is ball and it can be surface mounted.
MCP2200T-I/MQ
MCP2200T-I/MQ by Microchip Tech: Operates at 3-5.5V, 12MHz clock freq, 1.5MBps data rate. Ideal for UART and USB bus control apps due to its compact size (5x5mm) and low supply current (15mA).
PI7C9X2G608GPANJEX
PI7C9X2G608GPANJEX by Diodes Inc. is a Bus Controller IC with 196 terminals, CMOS technology, and industrial temperature grade. It is used in X86, PowerPC, MIPS, ARM systems for PCI bus compatibility applications.
XR22801IL32-F
Exar
Exar's XR22801IL32-F is a 32-terminal bus controller IC with a max clock frequency of 25 MHz. It operates in industrial temperature range (-40 to 85 °C) and supports I2C bus compatibility. Ideal for applications requiring universal serial bus peripheral interface, it features CMOS technology and quad terminal position.
PI7C9X111SLBFDE
PI7C9X111SLBFDE by Diodes Inc. is a bus controller with a 32-bit address and external data bus width. It operates at a max clock frequency of 100 MHz and has a low profile package shape. This IC is commonly used in industrial applications requiring PCI bus control.
PEX8604-BA50BCG
Broadcom
Broadcom's PEX8604-BA50BCG is a PCI bus controller with 196 terminals in a square grid array package. It operates at supply voltages b/w 0.95V to 1.05V, supporting data transfer rates up to 0.1 MBps. Ideal for I2C bus compatibility, this CMOS technology device is designed for applications requiring high-speed peripheral connectivity.
CY7C64225-28PVXCT
CY7C64225-28PVXCT by Infineon is a 28-terminal bus controller with a max clock frequency of 24 MHz. It operates at temperatures from 0 to 70 °C and supports USB peripherals. This CMOS technology device has a small outline package for surface mount applications.
UPD350B-I/Q8X
UPD350B-I/Q8X by Microchip: Operates at 48MHz clock frequency, supports I2C, SPI, USB buses. Ideal for industrial applications with -40 to 85°C temp range. Features 28 terminals in a square chip carrier package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
USB2514BI-AEZG
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
USB2514B-AEZC
Microchip Technology's USB2514B-AEZC is a BUS CONTROLLER with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a max clock frequency of 24 MHz and operates b/w 0-85°C. The chip carrier package style with matte tin finish is suitable for various applications requiring high-speed data transfer over USB interfaces.
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
USB2514B-AEZC-TR
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: OTHER; Package Code: HVQCCN; Nominal Supply Voltage: 3.3 V; Additional Features: ALSO REQUIRES 3.3V SUPPLY; Bus Compatibility: I2C;
Microchip USB2514B-AEZC-TR is a 36-terminal BUS CONTROLLER with 3.3V supply, 24MHz clock frequency, and I2C/SMBUS/USB compatibility. Ideal for applications requiring universal serial bus connectivity in compact spaces due to its small size and low power consumption.
USB2514BI-AEZG-TR
Microchip USB2514BI-AEZG-TR is a 36-terminal BUS CONTROLLER IC with 3.3V supply, 24MHz clock freq, and -40 to 85°C temp range. Ideal for I2C, SMBUS, and USB bus applications in industrial settings.
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Package Code: HVQCCN; Maximum Supply Voltage: 3.6 V; Width: 6 mm; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
USB2514B-I/M2
The Microchip Technology USB2514B-I/M2 is a bus controller with 36 terminals, operating at 3-3.6V, and supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz, industrial temperature grade (-40 to 85°C), and a compact square package suitable for various applications requiring high-speed data transfer in constrained spaces.
USB2514B-AEZG-TR
Microchip Technology's USB2514B-AEZG-TR is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V nominal voltage and up to 24MHz clock frequency. It supports I2C, SMBUS, and USB buses, suitable for applications requiring high-speed data transfer in compact designs.
USB2517-JZX
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;
The Microchip Technology USB2517-JZX is a bus controller with 64 terminals and operates at a clock frequency of up to 24 MHz. It supports I2C, SMBUS, and USB buses, with a data transfer rate of 60 MBps. Ideal for commercial applications requiring high-speed communication in compact spaces.
USB2514B-AEZG
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
USB2514B-AEZG by Microchip Tech is a BUS CONTROLLER with 36 terminals, operating at 3.3V. It supports I2C, SMBUS, and USB buses with a clock frequency of 24MHz. Ideal for applications requiring high-speed data transfer in commercial temperature range from 0 to 70°C.
USB2514B/M2
The Microchip Technology USB2514B/M2 is a bus controller IC with 36 terminals, operating at 3-3.6V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and operates in temperatures ranging from 0-85°C. This chip carrier is ideal for applications requiring universal serial bus connectivity in compact designs.
USB2517-JZX-TR
Microchip Technology's USB2517-JZX-TR is a 64-terminal bus controller with a max data transfer rate of 60 MBps. It operates b/w 0 to 70 °C and supports I2C, SMBUS, and USB buses. Ideal for applications requiring high-speed universal serial bus connectivity in commercial-grade environments.
USB2512BI-AEZG
The Microchip USB2512BI-AEZG is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V. It supports I2C, SMBUS, and USB buses, with a clock frequency of up to 24 MHz. Ideal for industrial applications requiring reliable data transfer in a compact form factor.
USB2512BI-AEZG-TR
Microchip Technology's USB2512BI-AEZG-TR is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V. It supports I2C, SMBUS, and USB buses with a clock frequency of up to 24 MHz. Ideal for industrial applications requiring a temp range of -40 to 85 °C, it comes in a small square package measuring 6x6 mm.
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Package Code: HVQCCN; Nominal Supply Voltage: 3.3 V; Minimum Supply Voltage: 3 V; Address Bus Width: 0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved