Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schurter Ag 0001.1007 fuse, rated 2A and 250V, with very fast blow characteristic. Measuring 5x20mm, it has a nominal joule integral of 2J and max operating temp of 125°C. Ideal for circuit protection in various applications due to its high breaking capacity and compact size.
Median Price
$0.588
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.338
100+ parts
$0.262
1k+ parts
-
10k+ parts
RS Americas
$0.630
$0.500
Farnell
$0.653
$0.482
$0.388
$0.380
Mouser Electronics
$1.130
$0.663
$0.517
$0.418
Newark
Verical
$0.440
$0.296
Element14
$0.430
$0.394
Bürklin Elektronik
$0.219
$0.170
RS (Exports)
$0.620
$0.494
TME
$0.600
$0.459
$0.348
$0.247
IBS Electronics
$0.252
$0.925
$0.874
Vyrian
Electro Sonic
$0.524
$0.367
$0.359
Schukat
$0.186
$0.162
$0.155
Rutronik
$0.141
$0.139
Inventory MP
Bristol Electronics
Sensible Micro Corp
Aranea Global
$0.353
Continental Prestige Electronics
$0.328
Glotronic Ltd.
Perfect Parts
With a high joule rating of 2 J, this fuse is capable of handling surges and spikes effectively, providing reliable protection for your circuit.
Suitable for use in circuits with a maximum voltage of 250V, ensuring compatibility with a wide range of applications.
The ability to operate at temperatures up to 125°C makes this fuse suitable for high-temperature environments, enhancing its versatility.
A very fast blow characteristic ensures that the fuse responds quickly to overcurrent conditions, minimizing the risk of damage to your equipment.
With a high breaking capacity of 1500 A, this fuse can safely interrupt high fault currents, protecting the circuit from damage.
The inline or holder mounting feature offers flexibility in installation, allowing you to choose the most convenient method for your application.
Fuses 0001.1007 attributes and parameters. Explore more Fuses devices from Schurter Ag
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0001.1007 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
The SCHURTER Group is the world's leading Swiss technology company ensuring a clean and safe supply of power, ease of use, and sophisticated overall solutions. As a leading innovator, SCHURTER manufactures and distributes components for circuit protection, as well as connectors, switches, and EMC products. In close cooperation with the customers, input systems are developed and manufactured. SCHURTER also offers services for the electronics industry in the field of the printed circuit board assembly. The business unit Solutions coordinates complete solutions from project planning to the manufacture of end products. 20 companies in 17 countries belong to the SCHURTER Group, 14 companies of which have their own production sites. This ensures that all major markets can be served by their own companies. They are coordinated from three hubs: SCHURTER AG in Lucerne for Europe, SCHURTER Inc. in Santa Rosa for America as well as SCHURTER (S) Pte. Ltd. in Singapore for Asia. In addition, SCHURTER has representatives in about 60 countries and works together with over 200 distributors. This close-knit network guarantees that SCHURTER products are securely and quickly available internationally.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
Onsemi
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
PV-6A10-T
Eaton Corporation
Eaton Corporation's PV-6A10-T fuse, 10x38mm size with 6A rated current and 30J nominal joule integral, is ideal for electric circuit protection. With a rated breaking capacity of 50kA and max operating temperature of 90°C, it suits applications requiring reliable inline mounting in various industries.
0691-0050-01
Bel Fuse
Bel Fuse 0691-0050-01 is a MICRO fuse with 0.05A rated current and 250V AC voltage. It offers fast blow characteristic, 50A breaking capacity, and operates b/w -55°C to 125°C. Ideal for circuit protection in various applications requiring electric fuses.
ATM-15
Eaton Corporation's ATM-15 fuse, with 15A rated current and 32V rated voltage, is a fast blow electric fuse suitable for circuit protection. Measuring 10.92mm x 3.81mm x 8.81mm, it has a silver terminal finish and UL reference standard compliance. Ideal for inline mounting applications, it offers a max operating temperature of 100°C and a rated breaking capacity of 1000A.
80ET
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated DC Voltage: 350 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE;
ATM20
Mersen S A
The Mersen S A ATM20 fuse is a 20A fast blow electric fuse with 600V AC/DC rated voltage and 100kA breaking capacity. It comes in midget size, measures 10mm x 38mm, and has end cap terminals. Ideal for inline mounting applications requiring reliable circuit protection.
SP/LPJ-400SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
FNQ-12
FNQ-12 fuse by Eaton Corporation is a 12A MIDGET fuse with TIME DELAY blow characteristic. Rated for 500V AC/DC, it has a breaking capacity of 10kA. Ideal for circuit protection in various applications like industrial machinery and electrical equipment.
SC-60
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 480 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: END CAP;
FNM-2-1/2
Eaton Corporation's FNM-2-1/2 fuse is a MIDGET size with 2.5A current rating and 250V AC voltage. It features TIME DELAY blow characteristic for circuit protection, with a rated breaking capacity of 100A. Ideal for inline mounting applications, it meets CE, CSA, and UL standards.
0458003.DR
Littelfuse
Littelfuse 0458003.DR Nano fuse with 3A current rating, 48V AC voltage, and 2.289J joule integral. Ideal for circuit protection in applications requiring a surface mount nano-sized fuse with WRAPAROUND terminals. Meets CUL and UL standards, operates b/w -55°C to 125°C temperature range.
PTS120616V035
Eaton Corporation's PTS120616V035 fuse, with 0.35A current and 16V voltage rating, offers fast blow characteristic in a 1206 size. Ideal for circuit protection, it has a trip time of 0.1s and rated breaking capacity of 100A. Suitable for surface mount applications with TUV and UL standards compliance.
LPJ-400SPI
Eaton Corporation's LPJ-400SPI fuse, rated at 400A and 600V AC/300V DC, features a J class with time delay blow characteristic. With a compact body size of 53.6mm x 38.3mm, it is suitable for inline mounting applications requiring electric circuit protection and has built-in indicator features.
JLLS050.T
Littelfuse JLLS050.T fuse, rated 50A/600V, fast blow characteristic. Ideal for electric circuit protection with 200kA breaking capacity. Suitable for inline mounting in CE/CSA/UL compliant applications.
JJS-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ATQR4-1/2
Mersen S A's ATQR4-1/2 fuse, rated 4.5A and 600V AC, features time delay blow characteristic. With a 10.4mm x 38.1mm dimension, it is ideal for electric circuit protection with a high breaking capacity of 200kA at 300V DC. Suitable for inline mounting, it complies with CSA, CE, and UL standards.
ANL-300
ANL-300 by Eaton Corp is a 300A time delay electric fuse with 2700A breaking capacity. Measuring 81mm x 22.2mm, it features END CAP terminals and an inline mounting feature. Ideal for circuit protection in applications requiring up to 80V DC voltage, compliant with CSA and UL standards.
FWP-63A22F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 63 A; Terminal Shape: END CAP;
FRN-R-6-1/4
Eaton Corporation's FRN-R-6-1/4 fuse, rated 6.25A at 250V AC/125V DC, features RK5 class with time delay blow characteristic. It has a compact body size of 14.22mm x 50.8mm and high breaking capacity of 200kA, suitable for electric circuit protection in various applications.
SP/LPJ-200SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE;
FNQ-R-15
FNQ-R-15 by Eaton Corporation is a 15A time delay fuse with a rated AC voltage of 600V. It has a compact body size of 10.3mm x 38.1mm and is suitable for circuit protection in applications such as inline/holder mounting in electrical systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0001.2712.11
Schurter Ag
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 6.3 A; Terminal Shape: END CAP;
0001.2534
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 63 V; Rated Current: 10 A; Terminal Shape: END CAP;
0001.2516
Schurter Ag 0001.2516 fuse, rated at 16A and 250V, with a time lag blow characteristic. Ideal for circuit protection in applications requiring a 5x20mm size fuse with a max operating temperature of 125°C. Compliant with CUL, UL, VDE standards and has a pre-arcing rating of 1500 A2/s.
0001.1004
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Body Height: 5.2 mm;
0001.1009
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: END CAP; Blow Characteristic: VERY FAST;
0001.2511
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 5 A; Terminal Shape: END CAP;
0001.2514
Schurter Ag 0001.2514 fuse, rated 10A & 250V, with 400J nominal joule integral. Ideal for circuit protection in applications requiring time lag blow characteristic and rated breaking capacity of 1000A. Dimensions: 5x20mm, terminal shape: end cap, mounting feature: inline/holder.
0001.1001
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: END CAP; Minimum Pre Arcing Time: 20 ms;
0001.1005
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Minimum Pre Arcing Time: 20 ms;
0001.2714.11
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 10 A; Terminal Shape: END CAP;
0001.1006
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.6 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
0001.1008
Schurter Ag 0001.1008 fuse, rated 2.5A and 250V, with blow characteristic VERY FAST. Dimensions of 5x20mm, suitable for inline mounting applications in circuits requiring ELECTRIC FUSE protection up to 125°C operating temperature.
0001.2711.11
Schurter Ag 0001.2711.11 fuse, rated 5A and 250V, with time lag blow characteristic. Ideal for circuit protection in applications requiring a 5x20mm size fuse with gold terminal finish and inline mounting feature. Complies with CCC, CUL, VDE, and UL standards for reliable performance in temperatures ranging from -55°C to 125°C.
0001.1014
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Nominal Joule Integral: 141 J;
0001.2508
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 300 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
0001.2501
0001.2501 by Schurter Ag is a 5x20mm electric fuse with a rated current of 0.5A and rated AC voltage of 250V. It has a time lag blow characteristic and is suitable for circuit protection in applications such as inline/holder mounting.
0001.2509
Schurter Ag 0001.2509 fuse, rated 3.15A and 250V, with time lag blow characteristic. Dimensions of 5x20mm, suitable for electric circuit protection in applications requiring a max operating temperature of 125°C. Compliant with CCC, CUL, KTL, METI, UL, VDE standards.
0001.1016
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 16 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
0001.2507
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
0001.1007.G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Packing Method: BULK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved