Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schurter Ag 0001.2714.11 fuse, 5x20mm size, rated 10A current & 250V AC voltage. Ideal for circuit protection in applications requiring time lag blow characteristic and high breaking capacity up to 1000A. Compliant with CUL, VDE, UL standards for reliable performance in inline mounting setups.
Median Price
$1.354
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$0.540
100+ parts
$0.430
1k+ parts
$0.400
10k+ parts
-
Sager
$1.020
$0.928
$0.773
Farnell
$1.520
$0.879
Element14
$1.555
$0.988
$0.892
Mouser Electronics
$2.020
$1.180
$1.080
$0.897
DigiKey
$2.430
$1.425
$1.087
Master Electronics
$0.872
$0.813
$0.681
Verical
$1.188
Nova Conductors
$0.797
VNN
Vyrian
Electro Sonic
$1.093
$0.959
$0.861
IBS Electronics
$1.223
$1.140
$0.955
Argo Parts USA
Netroflash
$0.757
$0.741
Component Stockers USA
$1.380
$0.890
$0.810
Continental Prestige Electronics
$1.400
$0.781
$0.690
Corohmni
$16.241
Aztec Data Supply Inc.
$19.659
Neutron USA
$19.990
Formix International (Excess)
Perfect Parts
Provides high level of protection by absorbing 400 Joules of energy, ensuring safety of the circuit.
Suitable for use in circuits with up to 250 volts AC, making it versatile for a range of applications.
Standard size makes it compatible with various fuse holders, ensuring easy installation.
Can withstand high temperatures up to 125°C, ensuring reliable performance under heat stress.
Can be mounted inline or in a holder, providing flexibility in installation options based on the application requirements.
Fuses 0001.2714.11 attributes and parameters. Explore more Fuses devices from Schurter Ag
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Additional Features:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0001.2714.11 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
The SCHURTER Group is the world's leading Swiss technology company ensuring a clean and safe supply of power, ease of use, and sophisticated overall solutions. As a leading innovator, SCHURTER manufactures and distributes components for circuit protection, as well as connectors, switches, and EMC products. In close cooperation with the customers, input systems are developed and manufactured. SCHURTER also offers services for the electronics industry in the field of the printed circuit board assembly. The business unit Solutions coordinates complete solutions from project planning to the manufacture of end products. 20 companies in 17 countries belong to the SCHURTER Group, 14 companies of which have their own production sites. This ensures that all major markets can be served by their own companies. They are coordinated from three hubs: SCHURTER AG in Lucerne for Europe, SCHURTER Inc. in Santa Rosa for America as well as SCHURTER (S) Pte. Ltd. in Singapore for Asia. In addition, SCHURTER has representatives in about 60 countries and works together with over 200 distributors. This close-knit network guarantees that SCHURTER products are securely and quickly available internationally.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
1554216004
Molex
WIRE AND CABLE;
BSS138BKW,115
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
Lite-on Semiconductor
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Loras Industries
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Multicomp Pro
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
0473003MRT1L
Littelfuse
0473003MRT1L by Littelfuse is a slow blow electric fuse with 3A rated current and 125V AC/DC voltage. It has a nominal joule integral of 21J, suitable for circuit protection in applications requiring a max operating temperature of 125°C. This fuse comes in tape and reel packing method, with dimensions of 7.11mm x 3.43mm and terminal shape as pin wire for through-hole mounting.
0297005WXNV
Littelfuse 0297005WXNV fuse with 5A rated current, 25J nominal joule integral, and 32V DC voltage rating. Ideal for circuit protection in applications requiring inline mounting, such as automotive electronics and industrial equipment. Operating temperature range from -40°C to 125°C ensures reliable performance in various environments.
KTK-R-2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
BK/ATC-5
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
FNQ-R-1
Eaton Corporation
Eaton Corporation's FNQ-R-1 fuse, rated at 1A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is ideal for circuit protection in various applications requiring a rated breaking capacity of 200kA. Compliant with CE, CSA, and UL standards, it can be mounted inline or in a holder for efficient use.
3413.0119.22
Schurter Ag
Schurter Ag 3413.0119.22 fuse, rated 2A and 32V, with 0.23J nominal joule integral. Very fast blow characteristic for electric circuit protection in surface mount applications at -55 to 90°C temperatures. Compliant with CUL and UL standards, featuring gold nickel terminal finish and WRAPAROUND shape.
ATM10
Mersen S A
The Mersen S A ATM10 fuse is a 10A, 600V fast-blow electric fuse with a midget size and end cap terminal shape. It has a rated breaking capacity of 100kA and is suitable for inline/holder mounting in various applications requiring circuit protection. Compliant with CSA and UL standards, it measures 10mm x 38mm.
C14G40
The Eaton Corporation C14G40 fuse is a 40A electric fuse with a rated AC/DC voltage of 500V. It has a body length/diameter of 14mm and height of 51mm, featuring an end cap terminal shape. With a high breaking capacity of 120kA, it is ideal for inline/holder mounting in various applications requiring reliable circuit protection.
LP-CC-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
0313003.MXP
Littelfuse 0313003.MXP fuse, rated at 3A and 250V, offers a trip time of 5s with a blow characteristic of TIME LAG. With dimensions of 6.35mm x 31.75mm, it is used for circuit protection in applications requiring a supplemental electric fuse with a pre-arcing rating of 200 A2/s.
ATM-30LP
Eaton Corporation's ATM-30LP fuse is a 30A electric fuse with fast blow characteristic. It has dimensions of 10.9mm x 3.81mm x 8.73mm and rated voltage of 32V, suitable for inline mounting applications in circuits requiring protection up to 1000A at temperatures ranging from -40°C to 125°C.
0456030.ER
Littelfuse 0456030.ER fuse has a rated current of 30A and nominal joule integral of 81J, suitable for circuit protection with a very fast blow characteristic at 125V AC voltage. It is a surface mount type fuse with dimensions of 10.1mm x 3.12mm x 3.12mm, featuring WRAPAROUND terminals and silver finish for applications requiring high breaking capacity up to 100A.
AJT600EI
Mersen S A's AJT600EI fuse, rated at 600V AC/500V DC and 600A, features a time delay blow characteristic. With a breaking capacity of 200kA, it is ideal for electric circuit protection in various applications. The fuse has TAB/BLADE terminals, measures 91.8mm in height, and includes an inline/holder mounting feature with an indicator as per UL standards.
BK/ATM-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Reference Standard: UL;
J-41
Fuses;
021806.3MXP
Littelfuse 021806.3MXP fuse, rated at 6.3A and 250V, features a time lag blow characteristic with trip time of 0.02s. With dimensions of 5x20mm, it is used for electric circuit protection in various applications due to its high pre arcing rating of 198.5 A2/s.
3403.0155.24
Schurter Ag's 3403.0155.24 fuse is a TIME LAG type with 0.08A rated current and 250V AC/DC voltage, suitable for ELECTRIC FUSE circuit protection in various applications. With dimensions of 10.1mm x 3mm x 3mm and a rated breaking capacity of 200A, it offers reliable performance at temperatures ranging from -55°C to 125°C. Ideal for surface mount installations, this fuse has a nominal joule integral of 0.022J for efficient energy dissipation.
LPJ-10SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
FNQ-R-4
FNQ-R-4 fuse by Eaton Corp, rated 4A at 600V AC, features time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring high breaking capacity up to 200kA. Suitable for use with CE, CSA, and UL standards in inline/holder mounting configurations.
ERBRD3R00X
Panasonic
Panasonic ERBRD3R00X fuse, 0402 size, rated 3A current with fast blow characteristic. Ideal for electric circuit protection in surface mount applications. Operating temp range -40 to 125°C, rated DC voltage of 32V and breaking capacity of 35A. CUL and UL certified for quality assurance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0001.2712.11
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 6.3 A; Terminal Shape: END CAP;
0001.2511
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 5 A; Terminal Shape: END CAP;
0001.2534
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 63 V; Rated Current: 10 A; Terminal Shape: END CAP;
0001.2516
Schurter Ag 0001.2516 fuse, rated at 16A and 250V, with a time lag blow characteristic. Ideal for circuit protection in applications requiring a 5x20mm size fuse with a max operating temperature of 125°C. Compliant with CUL, UL, VDE standards and has a pre-arcing rating of 1500 A2/s.
0001.2508
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 300 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
0001.2501
0001.2501 by Schurter Ag is a 5x20mm electric fuse with a rated current of 0.5A and rated AC voltage of 250V. It has a time lag blow characteristic and is suitable for circuit protection in applications such as inline/holder mounting.
0001.2507
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
0001.2510
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 4 A; Terminal Shape: END CAP;
0001.2514
Schurter Ag 0001.2514 fuse, rated 10A & 250V, with 400J nominal joule integral. Ideal for circuit protection in applications requiring time lag blow characteristic and rated breaking capacity of 1000A. Dimensions: 5x20mm, terminal shape: end cap, mounting feature: inline/holder.
0001.1012
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 6.3 A; Terminal Shape: END CAP; Body Height: 5.2 mm;
0001.1014
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Nominal Joule Integral: 141 J;
0001.1010
Schurter Ag 0001.1010 fuse, rated 4A and 250V, with a blow characteristic of VERY FAST. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with high breaking capacity of 1500A. Operating temperature range from -55 to 125°C makes it suitable for various industries.
0001.1015.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 12.5 A; Terminal Shape: PIN WIRE; Maximum Operating Temperature: 125 Cel;
0001.1015
Schurter Ag 0001.1015 fuse, rated at 12.5A and 250V, offers very fast blow characteristic with a nominal joule integral of 203J. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with nickel terminal finish and high breaking capacity of 1000A.
0001.1016
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 16 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
0001.2707.22
0001.2512.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 6.3 A; Terminal Shape: PIN WIRE;
0001.2711.21
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 5 A; Terminal Shape: END CAP;
0001.2713.21
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 8 A; Terminal Shape: END CAP;
0001.2710.11
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved