Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schurter Ag 0001.2508 fuse, rated 2.5A and 250V, with dimensions of 5.2mm x 20mm, is ideal for circuit protection in applications requiring a time lag blow characteristic. It has a pre arcing rating of 11.7 A2/s and can operate b/w -55°C to 125°C, meeting standards such as CCC, CUL, KTL, METI, UL, VDE.
Median Price
$0.612
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.620
100+ parts
-
1k+ parts
10k+ parts
Farnell
$0.676
$0.471
$0.364
$0.363
Mouser Electronics
$0.920
$0.643
$0.492
$0.406
DigiKey
$1.100
$0.644
$0.407
Element14
$0.589
$0.540
Verical
$0.460
$0.411
TTI Europe
Future Electronics
$0.605
$0.575
Master Electronics
$0.650
$0.477
$0.388
Arrow
$0.311
Quail Electronics
Bürklin Elektronik
$0.219
$0.170
Component Electronics Inc.
$0.580
$0.430
$0.380
TME
$0.770
$0.395
$0.286
$0.208
Component Sense
IBS Electronics
$0.431
$0.417
$0.242
Vyrian
Electro Sonic
$0.549
$0.433
$0.390
ACDS - Activité Composants Distribution Service
NAC Semi
Sunrise Surplus Inc.
Schukat
$0.171
$0.149
First Choice Components Inc.
Prism Electronics
Argo Parts USA
$0.378
$0.367
Allen Electronics Distributors
$0.496
Continental Prestige Electronics
$0.329
Perfect Parts
Netroflash
$0.370
$0.359
$0.352
High energy absorption capability, providing reliable protection against power surges and electrical faults.
Suitable for use in standard household and industrial electrical systems with a maximum voltage of 250 volts.
Compact size for easy installation in various electronic devices and equipment.
Common size for easy replacement and compatibility with a wide range of fuse holders.
Designed to safely handle a current of up to 2.5 amps, suitable for protecting low to moderate power circuits.
Time delay feature helps prevent nuisance tripping during inrush currents, providing reliable circuit protection.
Can withstand high temperatures without sacrificing performance or safety during operation.
Works effectively in cold environments, ensuring consistent circuit protection even in extreme temperature conditions.
High breaking capacity to safely interrupt fault currents without damaging the equipment or posing a safety hazard.
Corrosion-resistant terminal finish for reliable electrical connections and long-term durability.
Fuses 0001.2508 attributes and parameters. Explore more Fuses devices from Schurter Ag
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Minimum Pre Arcing Time:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Additional Features:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0001.2508 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
The SCHURTER Group is the world's leading Swiss technology company ensuring a clean and safe supply of power, ease of use, and sophisticated overall solutions. As a leading innovator, SCHURTER manufactures and distributes components for circuit protection, as well as connectors, switches, and EMC products. In close cooperation with the customers, input systems are developed and manufactured. SCHURTER also offers services for the electronics industry in the field of the printed circuit board assembly. The business unit Solutions coordinates complete solutions from project planning to the manufacture of end products. 20 companies in 17 countries belong to the SCHURTER Group, 14 companies of which have their own production sites. This ensures that all major markets can be served by their own companies. They are coordinated from three hubs: SCHURTER AG in Lucerne for Europe, SCHURTER Inc. in Santa Rosa for America as well as SCHURTER (S) Pte. Ltd. in Singapore for Asia. In addition, SCHURTER has representatives in about 60 countries and works together with over 200 distributors. This close-knit network guarantees that SCHURTER products are securely and quickly available internationally.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
0297010.H
Littelfuse
Littelfuse 0297010.H is a MINI fuse with 10A rated current, 32V DC voltage, and 122J nominal joule integral. It has a trip time of 0.03s and is used for electric circuit protection in various applications due to its compact size and high breaking capacity.
TCF60RN
Eaton Corporation
Eaton Corporation's TCF60RN fuse is rated for 600V AC and 300V DC with a 60A current. With time delay blow characteristic, it offers circuit protection in inline/holder mounting applications. Measuring 54.1mm x 25.4mm x 28.58mm, it meets CSA and UL standards for electrical safety.
BK/ATC-25
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE;
ATM-5LP
Eaton Corporation's ATM-5LP fuse, with 10.9mm x 3.81mm x 8.73mm dimensions, rated at 5A and 32V, features a fast blow characteristic for circuit protection. Ideal for applications requiring electric fuses in inline/holder mounting setups, it offers a rated breaking capacity of 1000A and operates b/w -40°C to 125°C temperatures.
BK/ATM-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Body Width: 3.81 inch;
0297010.WXT
Littelfuse 0297010.WXT is a MINI electric fuse with 10A current rating, 32V DC voltage, and 122J nominal joule integral. It has a trip time of 0.03s and rated breaking capacity of 1000A. Ideal for inline mounting in circuits requiring fast-acting protection against overcurrent situations.
0ATO07.5V
Littelfuse 0ATO07.5V fuse with 7.5A rated current, 60J nominal joule integral, and 0.1s trip time is ideal for electric circuit protection. With a rated breaking capacity of 1000A and operating temperatures from -40°C to 125°C, it suits various applications requiring inline mounting in CSA/UL compliant systems.
0685T4000-01
Bel Fuse
Bel Fuse 0685T4000-01 is a 1206 size fuse with 4A rated current and 63V DC voltage. It has a slow blow characteristic, trip time of 0.002s, and rated breaking capacity of 50A. Ideal for circuit protection in automotive applications due to AEC-Q200 compliance and surface mounting feature.
FWP-50A14F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 50 A; Terminal Shape: END CAP;
LPJ-150SP
Eaton Corporation's LPJ-150SP fuse, rated at 150A and 600V AC/DC, features a J class with time delay blow characteristic. Measuring 41.4mm x 76.2mm, it is designed for electric circuit protection in various applications, meeting CE, CSA, and UL standards. Suitable for inline mounting with TAB/BLADE terminals.
LP-CC-3-1/2
Eaton Corporation LP-CC-3-1/2 fuse, rated 3.5A and 600V AC, features time delay blow characteristic for electric circuit protection. With a rated breaking capacity of 200kA, it is suitable for inline mounting applications in CE, CSA, and UL standard compliant systems.
FNQ-R-15
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
0AKK-K100-BB
The Bel Fuse 0AKK-K100-BB is a fast blow electric fuse with a rated current of 100 A and a max operating temperature of 125°C. It has a nominal joule integral of 1560 J and is commonly used for circuit protection in applications requiring high breaking capacity and DC voltage up to 1000 V.
031302.5HXP
Littelfuse 031302.5HXP fuse, rated 2.5A at 250V, offers a time lag blow characteristic with a trip delay of 14400s. With a nominal joule integral of 130J, it provides supplemental circuit protection in applications requiring a max operating temperature of 125°C and pre-arcing rating of 130 A2/s.
FNQ-10
The Eaton Corporation FNQ-10 fuse, rated at 10A and 500V, features a time delay blow characteristic. With a compact MIDGET size and CC class, it offers circuit protection with a high breaking capacity of 10000A. Ideal for inline mounting in various applications certified by CE, CSA, and UL standards.
JJS-60
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 60 A; Terminal Shape: END CAP; Body Length/Diameter: 20.57 mm;
0001.2534
Schurter Ag
Schurter Ag 0001.2534 fuse, rated 10A with 250V AC & 63V DC, offers time lag blow characteristic and 1500A breaking capacity. Ideal for electric circuit protection in applications requiring a compact 6.3x32mm size fuse with nickel terminal finish and CUL/UL standards compliance.
AJT50
Mersen S A
AJT50 fuse by Mersen S A is a 50A time delay electric fuse with a rated AC voltage of 700V and rated DC voltage of 400V. With dimensions of 27mm x 60mm, it features an end cap terminal shape and inline/holder mounting for circuit protection applications requiring a high breaking capacity of 200000A.
032601.5HXP
Littelfuse 032601.5HXP fuse, rated 1.5A and 250V, with time lag blow characteristic. Nominal Joule Integral of 40.1J for circuit protection in applications requiring a delay of up to 14400s at -55°C to 125°C operating temperature range. Mountable using INLINE/HOLDER method, complies with CE, CSA, PSE, UL standards.
AGC-2-R
ELECTRIC FUSE; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 31.75mm x 31.75mm; Rated Voltage: 250 V; Reference Standard: CSA; UL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0001.2712.11
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 6.3 A; Terminal Shape: END CAP;
0001.2511
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 5 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 63 V; Rated Current: 10 A; Terminal Shape: END CAP;
0001.2714.11
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 10 A; Terminal Shape: END CAP;
0001.2516
Schurter Ag 0001.2516 fuse, rated at 16A and 250V, with a time lag blow characteristic. Ideal for circuit protection in applications requiring a 5x20mm size fuse with a max operating temperature of 125°C. Compliant with CUL, UL, VDE standards and has a pre-arcing rating of 1500 A2/s.
0001.2501
0001.2501 by Schurter Ag is a 5x20mm electric fuse with a rated current of 0.5A and rated AC voltage of 250V. It has a time lag blow characteristic and is suitable for circuit protection in applications such as inline/holder mounting.
0001.2507
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
0001.2510
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 4 A; Terminal Shape: END CAP;
0001.2514
Schurter Ag 0001.2514 fuse, rated 10A & 250V, with 400J nominal joule integral. Ideal for circuit protection in applications requiring time lag blow characteristic and rated breaking capacity of 1000A. Dimensions: 5x20mm, terminal shape: end cap, mounting feature: inline/holder.
0001.1012
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 6.3 A; Terminal Shape: END CAP; Body Height: 5.2 mm;
0001.1014
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Nominal Joule Integral: 141 J;
0001.1010
Schurter Ag 0001.1010 fuse, rated 4A and 250V, with a blow characteristic of VERY FAST. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with high breaking capacity of 1500A. Operating temperature range from -55 to 125°C makes it suitable for various industries.
0001.1015.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 12.5 A; Terminal Shape: PIN WIRE; Maximum Operating Temperature: 125 Cel;
0001.1015
Schurter Ag 0001.1015 fuse, rated at 12.5A and 250V, offers very fast blow characteristic with a nominal joule integral of 203J. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with nickel terminal finish and high breaking capacity of 1000A.
0001.1016
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 16 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
0001.2707.22
0001.2512.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 6.3 A; Terminal Shape: PIN WIRE;
0001.2504G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 300 V; Rated Current: 1 A; Terminal Shape: END CAP;
0001.2513G
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 8 A; Terminal Shape: END CAP;
0001.2512.G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved