Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 15 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
Median Price
$69.680
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
TTI
1+ parts
$59.780
100+ parts
$46.900
1k+ parts
-
10k+ parts
Master Electronics
$46.430
$45.960
RS Americas
$61.480
$49.180
$46.110
RS (Exports)
$55.740
Mouser Electronics
$72.260
$49.160
Verical
$75.006
$56.102
DigiKey
$87.460
$50.968
TEDSS.com
$13.290
Galco
$22.300
Component Electronics Inc.
$23.080
$17.310
$15.000
Carlton-Bates
$28.850
Kempston Controls
$37.610
Nova Conductors
$41.830
Electro Sonic
$62.030
$41.450
$39.760
Quotebeam
$68.540
IBS Electronics
$87.085
$67.638
$66.953
Quantum Digital Technology
Q Components
Vyrian
Electronic Expediters
Manoshevitz Elec. Sales
MISTER SPROCKETS
A2Z Electronics, Inc.
FDH Electronics
Elcom Components
ACDS - Activité Composants Distribution Service
AZTECH Wire
$7.134
Aztec Data Supply Inc.
$35.064
Corohmni
$35.780
Advanced Electronics
$37.444
Allen Electronics Distributors
$39.430
$30.320
Continental Prestige Electronics
$41.560
$40.729
Netroflash
$39.739
$38.902
Semicontronic
$52.260
$50.954
$50.692
Component Stockers USA
$56.860
Neutron USA
$139.990
Argo Parts USA
Glotronic Ltd.
Authorized Procurement Solutions
Perfect Parts
Fuses FNQ-15 attributes and parameters. Explore more Fuses devices from Cooper Electronic Technologies
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
FNQ-15 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
FNQ-R-4
Eaton Corporation
FNQ-R-4 fuse by Eaton Corp, rated 4A at 600V AC, features time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring high breaking capacity up to 200kA. Suitable for use with CE, CSA, and UL standards in inline/holder mounting configurations.
0437001.WR
Littelfuse
Littelfuse 0437001.WR is a fast blow fuse with 1A rated current, 63V DC voltage, and 0.1J nominal joule integral. Ideal for circuit protection in electronics, it has a compact size of 1206 and WRAPAROUND terminals. Operating temperature ranges from -55°C to 150°C.
LPJ-10SP
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
BK-AGC-10-R
The Eaton BK-AGC-10-R fuse, rated at 10A and 250V, with dimensions of 6.3x32mm, is a fast blow electric fuse suitable for circuit protection in various applications. It has a nominal joule integral of 486J and a rated breaking capacity of 200A, meeting CSA and UL standards. The fuse operates b/w -55°C to 125°C temperature range with pre-arcing rating of 0.492 A2/s.
0453003.MR
Littelfuse 0453003.MR fuse, rated at 125V and 3A, offers very fast blow characteristic with a trip time of 5s. Nano-sized with dimensions of 6.1mm x 2.69mm x 2.69mm, it is ideal for circuit protection in applications requiring surface mounting method and wraparound terminal shape.
PTS120660V005
Eaton Corporation's PTS120660V005 fuse has a trip time of 1.5s, rated voltage of 60V, and resistance of 50Ω. It is used for electric circuit protection in applications requiring fast blow characteristic and surface mounting feature.
BK/ATC-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE;
0456020.ER
Littelfuse 0456020.ER fuse has a rated current of 20A and nominal joule integral of 18J, suitable for circuit protection in applications requiring very fast blow characteristic at 125V AC/DC. With dimensions of 10.1mm x 3.12mm x 3.12mm, it is designed for surface mount installation with a rated breaking capacity of 100A and pre-arcing rating of 18 A2/s.
BK/ATM-15
Eaton Corporation's BK/ATM-15 fuse, with 15A rated current and 32V rated voltage, features fast blow characteristic and 1000A breaking capacity. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in applications requiring a temperature range of -40°C to 100°C and UL standard compliance.
0326.800HXP
Littelfuse 0326.800HXP fuse, rated at 0.8A and 250V, features a time lag blow characteristic with a trip delay of 14400s. Ideal for circuit protection in applications requiring a rated breaking capacity of 100A and pre-arcing rating of 8.2 A2/s.
LPJ-150SPI
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE;
ATM-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Dimensions: 10.92mm x 3.81mm x 8.81mm;
FNQ-R-1-1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.125 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; UL;
ATM-5LP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Maximum Operating Temperature: 125 Cel;
JJS-500
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE; Manufacturer Series: JJS;
BK/ATM-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Reference Standard: UL;
FRN-R-40
Eaton Corporation's FRN-R-40 fuse, with 250V AC/125V DC voltage rating and 40A current, features RK5 class and time delay blow characteristic. It is used for electric circuit protection in various applications, meeting CE, CSA, and UL standards. Dimensions: 20.6mm x 76.2mm; Terminal Shape: End Cap; Mounting Feature: Inline/Holder.
KTK-3
KTK-3 fuse by Eaton Corporation is a 600V fast blow electric fuse with a rated current of 3A. It has a compact body size of 10.3mm x 38.1mm and can handle high breaking capacity up to 100000A. This fuse is commonly used for circuit protection in various applications, such as inline or holder mounting in electrical systems.
0297004WXNV
Littelfuse 0297004WXNV fuse with 17J nominal joule integral, 10.9mm x 3.8mm x 8.8mm dimensions, and rated current of 4A is ideal for electric circuit protection at temperatures ranging from -40°C to 125°C. It features TAB/BLADE terminals with SILVER finish and is suitable for inline mounting applications up to 32V DC.
ATM-25
Eaton Corporation's ATM-25 fuse, with 25A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications like automotive and industrial equipment due to its high breaking capacity of 1000A and UL reference standard compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FNQ-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: .5 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
FNQ-12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 12 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: .5 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 12 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 12 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: .5 A; Terminal Shape: END CAP; Rated Voltage: 500 V;
FNQ-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 15 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 15 A; Terminal Shape: END CAP; Fuse Size: MIDGET;
FNQ-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 10 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 10 A; Terminal Shape: END CAP;
FNQ-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 1 A; Terminal Shape: END CAP; Rated Breaking Capacity: 10000 A;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 1 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 1 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
FNQ-15/100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: .15 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: .15 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: .15 A; Terminal Shape: END CAP; Rated Breaking Capacity: 10000 A;
FNQ-1/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: .1 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: .1 A; Terminal Shape: END CAP; Packing Method: BOX;
FNQ-1-1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 1.125 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved