Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schurter Ag 0001.2712.11 fuse: 6.3A, 250V, 171J joule integral; 5x20mm size with time lag blow characteristic. Ideal for circuit protection in applications requiring rated breaking capacity of 1500A and operating temperatures from -55°C to 125°C.
Median Price
$1.505
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.340
100+ parts
$0.913
1k+ parts
$0.832
10k+ parts
$0.828
DigiKey
$1.410
$0.904
$0.829
-
Farnell
$1.600
$1.110
Element14
$1.830
$1.290
$1.120
Nova Conductors
$0.824
Electro Sonic
$1.202
$1.093
$0.959
$0.874
VNN
LIBRA Elektronik GmbH
Vyrian
Semicontronic
$1.080
$1.053
$1.048
Continental Prestige Electronics
$1.370
$0.766
$0.676
Corohmni
$4.691
Advanced Electronics
$5.942
$5.645
Aztec Data Supply Inc.
$9.228
Neutron USA
$19.990
Argo Parts USA
Perfect Parts
Netroflash
$0.808
$0.783
Higher joule integral means the fuse can handle higher energy surges, providing better protection for the circuit it is connected to.
Suitable for use in standard household or industrial AC electrical systems.
Compact size allows for easy installation in various types of fuse holders.
Common size that is compatible with many existing fuse holders, making it easy to replace when needed.
Ideal for protecting circuits with currents up to 6.3 amps.
Can withstand high temperatures, making it suitable for use in environments where heat is a factor.
Time lag characteristics ensure protection against temporary overloads without unnecessary tripping.
Can be mounted inline or in a fuse holder, providing flexibility in installation options.
Fuses 0001.2712.11 attributes and parameters. Explore more Fuses devices from Schurter Ag
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Additional Features:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0001.2712.11 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
The SCHURTER Group is the world's leading Swiss technology company ensuring a clean and safe supply of power, ease of use, and sophisticated overall solutions. As a leading innovator, SCHURTER manufactures and distributes components for circuit protection, as well as connectors, switches, and EMC products. In close cooperation with the customers, input systems are developed and manufactured. SCHURTER also offers services for the electronics industry in the field of the printed circuit board assembly. The business unit Solutions coordinates complete solutions from project planning to the manufacture of end products. 20 companies in 17 countries belong to the SCHURTER Group, 14 companies of which have their own production sites. This ensures that all major markets can be served by their own companies. They are coordinated from three hubs: SCHURTER AG in Lucerne for Europe, SCHURTER Inc. in Santa Rosa for America as well as SCHURTER (S) Pte. Ltd. in Singapore for Asia. In addition, SCHURTER has representatives in about 60 countries and works together with over 200 distributors. This close-knit network guarantees that SCHURTER products are securely and quickly available internationally.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
Gec Plessey Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
B340A-13-F
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
North American Philips Discrete Products Div
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Dc Components
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
0297020WXNV
Littelfuse
Littelfuse 0297020WXNV fuse with 20A rated current, 380J nominal joule integral, and 32V DC voltage rating. Ideal for circuit protection in applications requiring a compact design, featuring TAB/BLADE terminals and SILVER finish. Dimensions of 10.9mm x 3.8mm x 8.8mm make it suitable for inline mounting or holder use in environments ranging from -40°C to 125°C.
LP-CC-6/10
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: .6 A; Terminal Shape: END CAP;
KTK-R-5
Eaton Corporation
Eaton Corporation's KTK-R-5 fuse, rated at 5A and 600V, features fast blow characteristic with a breaking capacity of 200kA. With CC class and nickel terminal finish, it is ideal for electric fuse circuit protection in various applications requiring inline mounting method. Measuring 10.3mm x 38.1mm, it complies with CE, CSA, and UL standards for reliable performance.
0215020.MXP
0215020.MXP by Littelfuse is a 20 A fuse with 2600 J nominal joule integral and 0.01s trip time. Ideal for circuit protection in applications requiring a 250 V rated AC/DC voltage, such as inline mounting in electronic devices.
ATM5
Mersen S A
Mersen S A's ATM5 fuse, rated 5A and 600V, features fast blow characteristic with 100kA breaking capacity. It is a midget size fuse with end cap terminal shape for inline mounting applications in circuits requiring electric protection. Compliant with CSA and UL standards, it comes in bulk packaging for easy installation.
ATQR4-1/2
Mersen S A's ATQR4-1/2 fuse, rated 4.5A and 600V AC, features time delay blow characteristic. With a 10.4mm x 38.1mm dimension, it is ideal for electric circuit protection with a high breaking capacity of 200kA at 300V DC. Suitable for inline mounting, it complies with CSA, CE, and UL standards.
SP/LPJ-200SP
Eaton Corporation's SP/LPJ-200SP fuse, rated 200A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 41.4mm x 76.2mm and silver terminal finish, it is ideal for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, this fuse offers a high breaking capacity of 300kA.
ANL-300
ANL-300 by Eaton Corp is a 300A time delay electric fuse with 2700A breaking capacity. Measuring 81mm x 22.2mm, it features END CAP terminals and an inline mounting feature. Ideal for circuit protection in applications requiring up to 80V DC voltage, compliant with CSA and UL standards.
SF-1206F250-2
Bourns
Bourns SF-1206F250-2 fuse, rated 2.5A with 50A breaking capacity, features fast blow characteristic and UL reference standard. With dimensions of 3.1mm x 1.55mm x 0.6mm, it is ideal for electric circuit protection in applications requiring surface mount fuses with a trip delay of 60s at -20 to +105°C temperature range.
3413.0008.22
Schurter Ag
Schurter Ag's 3413.0008.22 fuse is a 3.2x1.6mm surface mount type with 0.16A current rating and 125V AC voltage, suitable for electric circuit protection applications. It has a very fast blow characteristic, gold terminal finish, and meets CUL and UL standards for reliable performance in temperatures ranging from -55 to 90°C.
FNQ-12
FNQ-12 fuse by Eaton Corporation is a 12A MIDGET fuse with TIME DELAY blow characteristic. Rated for 500V AC/DC, it has a breaking capacity of 10kA. Ideal for circuit protection in various applications like industrial machinery and electrical equipment.
LP-CC-3-2/10
Eaton Corporation LP-CC-3-2/10 fuse, rated 3.2A and 600V AC, features time delay blow characteristic. With a 200kA breaking capacity, it is ideal for electric circuit protection in various applications. Measuring 10x38.1mm with end cap terminals, it meets CE, CSA, and UL standards for reliable performance.
0225002.MXP
0225002.MXP fuse by Littelfuse is a 2A, 250V fast-acting electric fuse with a rated breaking capacity of 100A. It has a trip time of 1s and nominal joule integral of 2.18J, suitable for circuit protection in various applications requiring quick response to overcurrent situations. Compliant with CE, CSA, PSE, and UL standards, it features nickel terminal finish and compact dimensions of 4.5mm x 14.48mm for easy installation in inline/holder mounting setups.
0452005MRL
0452005MRL by Littelfuse is a NANO fuse with 125V voltage rating and 5A current. With time lag blow characteristic, it offers circuit protection in various applications. Featuring trip delay of 14400s, it is ideal for use in electronics requiring reliable overcurrent protection.
PTS120616V025
Eaton Corporation's PTS120616V025 fuse, with 16V rated voltage and 0.25A current, offers fast blow characteristic in a 1206 size. Ideal for circuit protection, it has a trip time of 0.08s and operates b/w -40 to 85°C temperatures. Suitable for surface mount applications with TUV and UL standards compliance.
0446002.ZRP
Littelfuse 0446002.ZRP fuse has 2A current rating, 350V AC voltage, and fast blow characteristic. Ideal for circuit protection in applications requiring a rated breaking capacity of 100A. Dimensions: 10.92mm x 3.81mm x 8.76mm make it suitable for surface mount installations.
0468002.NR
Littelfuse 0468002.NR fuse, rated at 2A and 63V, with slow blow characteristic. Ideal for circuit protection in electronics applications. Dimensions of 3.18mm x 1.52mm x 0.58mm make it suitable for surface mounting method.
ATM-10
Eaton Corporation's ATM-10 fuse, with 10A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications due to its high breaking capacity of 1000A and UL reference standard compliance.
BK/ATM-30
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
ATDR4
Mersen S A's ATDR4 fuse, rated 4A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 10.4mm x 38.1mm and end cap terminal shape, it offers circuit protection with a high breaking capacity of 200kA. Ideal for inline mounting in various applications meeting CSA and UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0001.2511
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 5 A; Terminal Shape: END CAP;
0001.2534
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 63 V; Rated Current: 10 A; Terminal Shape: END CAP;
0001.2714.11
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 10 A; Terminal Shape: END CAP;
0001.2516
Schurter Ag 0001.2516 fuse, rated at 16A and 250V, with a time lag blow characteristic. Ideal for circuit protection in applications requiring a 5x20mm size fuse with a max operating temperature of 125°C. Compliant with CUL, UL, VDE standards and has a pre-arcing rating of 1500 A2/s.
0001.2508
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 300 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
0001.2501
0001.2501 by Schurter Ag is a 5x20mm electric fuse with a rated current of 0.5A and rated AC voltage of 250V. It has a time lag blow characteristic and is suitable for circuit protection in applications such as inline/holder mounting.
0001.2507
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
0001.2510
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 4 A; Terminal Shape: END CAP;
0001.2514
Schurter Ag 0001.2514 fuse, rated 10A & 250V, with 400J nominal joule integral. Ideal for circuit protection in applications requiring time lag blow characteristic and rated breaking capacity of 1000A. Dimensions: 5x20mm, terminal shape: end cap, mounting feature: inline/holder.
0001.1012
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 6.3 A; Terminal Shape: END CAP; Body Height: 5.2 mm;
0001.1014
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Nominal Joule Integral: 141 J;
0001.1010
Schurter Ag 0001.1010 fuse, rated 4A and 250V, with a blow characteristic of VERY FAST. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with high breaking capacity of 1500A. Operating temperature range from -55 to 125°C makes it suitable for various industries.
0001.1015.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 12.5 A; Terminal Shape: PIN WIRE; Maximum Operating Temperature: 125 Cel;
0001.1015
Schurter Ag 0001.1015 fuse, rated at 12.5A and 250V, offers very fast blow characteristic with a nominal joule integral of 203J. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with nickel terminal finish and high breaking capacity of 1000A.
0001.1016
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 16 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
0001.2707.22
0001.2512.PT
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 6.3 A; Terminal Shape: PIN WIRE;
0001.2713.22
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 8 A; Terminal Shape: END CAP;
0001.2715.11
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 12.5 A; Terminal Shape: END CAP;
0001.2716.11
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 16 A; Terminal Shape: END CAP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved