Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SF-1206F250-2 fuse, rated 2.5A with 50A breaking capacity, features fast blow characteristic and UL reference standard. With dimensions of 3.1mm x 1.55mm x 0.6mm, it is ideal for electric circuit protection in applications requiring surface mount fuses with a trip delay of 60s at -20 to +105°C temperature range.
Median Price
$0.492
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.520
100+ parts
$0.353
1k+ parts
$0.270
10k+ parts
$0.223
Arrow
$0.660
$0.404
$0.324
-
Master Electronics
$0.570
$0.391
$0.294
Verical
$0.336
Farnell
$0.286
$0.259
$0.256
Element14
$0.444
$0.436
DigiKey
$0.303
Chip1Stop
$0.218
$0.197
Newark
$0.545
$0.412
Nova Conductors
$0.351
Bristol Electronics
$0.857
$0.317
ACDS - Activité Composants Distribution Service
Electro Sonic
$0.206
IBS Electronics
$0.794
$0.447
$0.276
Dan-Mar Components
TME
$0.278
Vyrian
Velocity Electronics
Semi Source
Holdelec - ElecDif-Pro
Ampacity Inc.
$0.185
Semicontronic
$0.180
$0.179
Argo Parts USA
$0.341
$0.331
Advanced Electronics
$8.753
$7.965
$7.177
Corohmni
$18.246
Aztec Data Supply Inc.
$18.930
Perfect Parts
Metaverse IC Inc.
Authorized Procurement Solutions
Continental Prestige Electronics
$0.267
$0.262
$0.255
Netroflash
$0.344
$0.334
$0.327
This high joule rating indicates that the fuse has a strong ability to absorb and dissipate excess energy during a surge, providing reliable protection for your electronic devices.
The 60-second trip time allows for a short delay before the fuse responds to an overcurrent, helping prevent unnecessary tripping during temporary power peaks.
With a rated current of 2.5 A, this fuse is suitable for protecting low to moderate power electronic circuits from overloads and short circuits.
The high maximum operating temperature ensures that the fuse can withstand elevated temperatures, making it ideal for applications in environments with heat exposure.
The surface mount design allows for easy and secure installation on PCBs, saving space and facilitating efficient assembly processes in electronic devices.
Fuses SF-1206F250-2 attributes and parameters. Explore more Fuses devices from Bourns
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
SF-1206F250-2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
PCN Packaging - Mult Devs Label Change 17/Oct/2023
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Daco Semiconductor
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
0297003WXNV
Littelfuse
Littelfuse 0297003WXNV fuse with 9.4J joule integral, 3A rated current, and 32V DC voltage. Ideal for electric circuit protection in applications requiring a compact size of 10.9mm x 3.8mm x 8.8mm and operating temperatures from -40°C to 125°C.
LP-CC-6/10
Eaton Corporation
Eaton Corporation LP-CC-6/10 fuse, rated 600V AC/0.6A, with time delay blow characteristic. Inline/holder mounting for circuit protection in CE/CSA/UL compliant applications. Dimensions: 10mm x 38.1mm, body height 38mm, and rated breaking capacity of 200kA.
FNQ-R-1-1/8
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.125 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; UL;
FNQ-R-12
Eaton Corporation's FNQ-R-12 fuse, rated at 12A and 600V AC/300V DC, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and CC class, it is commonly used for circuit protection in various applications requiring a high breaking capacity of 200kA.
LP-CC-6
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 6 A; Terminal Shape: END CAP;
0468002.NR
Littelfuse 0468002.NR fuse, rated at 2A and 63V, with slow blow characteristic. Ideal for circuit protection in electronics applications. Dimensions of 3.18mm x 1.52mm x 0.58mm make it suitable for surface mounting method.
FRS-R-100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
ANL-80
ANL-80 by Eaton Corporation is an 81mm x 22.2mm electric fuse with a rated current of 80A and a blow characteristic of time delay. It is commonly used for circuit protection in applications requiring a rated breaking capacity of 2700A and a rated DC voltage of 80V.
0242.250UR
Littelfuse 0242.250UR fuse: Rated 0.25A, 250V with trip time of 14400s. Surface mountable for circuit protection in UL standard applications at -40 to 125°C temperature range.
KTK-12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
0313003.MXP
Littelfuse 0313003.MXP fuse, rated at 3A and 250V, offers a trip time of 5s with a blow characteristic of TIME LAG. With dimensions of 6.35mm x 31.75mm, it is used for circuit protection in applications requiring a supplemental electric fuse with a pre-arcing rating of 200 A2/s.
0437.250WR
Littelfuse 0437.250WR is a fast-acting electric fuse with 0.25A rated current and 125V rated voltage. It has a trip time of 5 seconds, making it suitable for circuit protection in applications requiring quick response to overcurrent conditions. With dimensions of 3.2mm x 1.63mm x 0.82mm, this surface mount fuse is ideal for use in electronic devices where space is limited.
BK/MDL-2-R
BK/MDL-2-R by Cooper Electronic Technologies is a 250V, 2A electric fuse with a rated breaking capacity of 100A. Featuring time delay blow characteristic and nickel terminal finish, it is ideal for inline mounting applications. With dimensions of 6.35mm x 31.75mm, this fuse offers circuit protection per CSA and UL standards in various electronic devices.
KRP-C-800SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 800 A; Terminal Shape: TAB/BLADE;
LPJ-12SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 12 A; Terminal Shape: END CAP;
ATM-10
Eaton Corporation's ATM-10 fuse, with 10A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications due to its high breaking capacity of 1000A and UL reference standard compliance.
0287003.PXS
Littelfuse 0287003.PXS fuse has a Nominal Joule Integral of 7.4 J, Trip Time of 0.08 sec, and Rated Current of 3 A. It is used for circuit protection in applications requiring a rated DC voltage of 32 V, with mounting features for INLINE/HOLDER setups.
0458008.DR
0458008.DR by Littelfuse is a NANO fuse with 8A rated current, 63V DC voltage, and 13.448J nominal joule integral. Ideal for circuit protection in applications requiring a surface mount fuse with WRAPAROUND terminals and a pre-arcing rating of 9 A2/s.
442
Uchihashi Estec
THERMAL FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 3.5 A; Terminal Shape: WIRE;
0230003.HXP
Littelfuse 0230003.HXP fuse has a rated current of 3A and nominal joule integral of 77J. With a blow characteristic of time lag, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C. The fuse features a rated AC voltage of 250V and dimensions of 4.7mm x 14.48mm, making it suitable for use in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF-1206S050-2
Bourns
SF-1206S050-2 by Bourns is a 1206 size surface mount fuse with a rated current of 0.5A and max operating temperature of 105°C. It is commonly used for circuit protection in electronic devices.
SF-1210S150W-2
Bourns SF-1210S150W-2 fuse with 1.5A current, 125V AC voltage, and 0.5J joule integral. Ideal for circuit protection in electronics due to slow blow characteristic and UL reference standard compliance. Dimensions of 3.2mm x 2.5mm x 1.6mm make it suitable for surface mount applications.
SF-1206S100-2
Bourns SF-1206S100-2 fuse, rated 1A with 50A breaking capacity, features slow blow characteristic and trip time of 5s. Sized at 3.1mm x 1.55mm x 0.6mm, it is ideal for electric circuit protection in applications requiring UL standard compliance and surface mounting feature.
SF-1206S200M-2
Bourns SF-1206S200M-2 fuse, rated 2A with 50A breaking capacity, features slow blow characteristic and UL reference standard. Ideal for electric circuit protection in applications requiring surface mounting method. Compact size of 3.2mm x 1.6mm x 0.97mm makes it suitable for various electronic devices.
SF-1206F700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Terminal Finish: TIN;
SF-1206HV25M-2
Bourns SF-1206HV25M-2 fuse, 3.2mm x 1.6mm x 0.97mm, rated at 35V DC with a breaking capacity of 200A. Ideal for circuit protection in electronics due to its UL standard compliance and surface mount feature. Operating temperature range from -55°C to 125°C ensures reliable performance in various environments.
SF-1206F100-2
Bourns SF-1206F100-2 fuse, rated 1A with 50A breaking capacity, features fast blow characteristic and trip time of 60s. Ideal for electric circuit protection in applications requiring surface mount fuses with dimensions of 3.1mm x 1.55mm x 0.6mm.
SF-1206S200-2
Bourns SF-1206S200-2 fuse, rated 2A with slow blow characteristic, has dimensions of 3.1mm x 1.55mm x 0.6mm and operates b/w -20 to 105 °C. Suitable for circuit protection in UL standard applications, it offers a rated DC voltage of 63V and a nominal Joule integral of 0.339J within a surface mount package.
SF-1206S300-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;
SF-1206S700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Blow Characteristic: SLOW;
SF-1206SP700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Reference Standard: UL;
SF-1206S200W-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 65 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Body Length/Diameter: 3.2 mm;
SF-1206HI800M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 24 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND; Packing Method: TR, 7 INCH;
SF-1206F050-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -20 Cel;
SF-1206S080-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: .8 A; Terminal Shape: WRAPAROUND; Blow Characteristic: SLOW;
SF-1206S800W-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND; Trip Time/Delay: 5 Seconds;
SF-1206S150-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND; Body Width: 1.55 inch;
SF-1206SA630W-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 6.3 A; Terminal Shape: WRAPAROUND; Body Height: 1.08 mm;
SF-1206F125-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND; Body Width: 1.55 inch;
SF-1206F200-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -20 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved