Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SF-1206F050-2 fuse, rated at 0.5A and 63V DC, offers fast blow characteristic with 50A breaking capacity. With dimensions of 3.1mm x 1.55mm x 0.6mm, it is ideal for circuit protection in electronics requiring surface mount fuses compliant with UL standards.
Median Price
$0.342
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Master Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
$0.310
Mouser Electronics
$0.560
$0.353
$0.293
$0.292
Arrow
$0.311
Verical
$0.285
DigiKey
$0.303
Farnell
$0.344
$0.268
$0.234
Element14
$0.518
$0.485
$0.452
Newark
$0.681
$0.502
$0.451
Chip1Stop
$0.192
Electro Sonic
$0.242
$0.206
Component Sense
NAC Semi
$0.498
LIBRA Elektronik GmbH
ComSIT Distribution GmbH
TME
$0.228
Semtec, LLC
Nova Conductors
Ampacity Inc.
$0.163
Advanced Electronics
$5.329
$4.849
$4.370
Perfect Parts
Eastek
$0.020
Abacus Technologies
Argo Parts USA
Continental Prestige Electronics
$0.298
$0.283
$0.260
Aranea Global
With a low Nominal Joule Integral, this fuse offers effective protection against electrical surges and overloads.
The 60-second trip time delay allows the fuse to provide timely protection while minimizing the risk of false tripping.
The compact body size of 3.1 mm makes this fuse suitable for applications where space is limited.
With a rated current of 0.5 A, this fuse is ideal for low-power electrical circuits and devices.
The fast blow characteristic ensures quick and reliable response to overcurrent conditions, protecting the circuit from damage.
The 63V rated DC voltage makes this fuse suitable for a wide range of DC applications, providing versatile circuit protection.
Fuses SF-1206F050-2 attributes and parameters. Explore more Fuses devices from Bourns
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
SF-1206F050-2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
PCN Packaging - Mult Devs Label Change 17/Oct/2023
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Transistor
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Changzhou Starsea Electronics
Diodes Incorporated
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
SPC TECHNOLOGY/ MULTICOMP
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
0ATO010.V
Littelfuse
0ATO010.V fuse by Littelfuse offers a rated current of 10A and trip time of 0.1s, suitable for electric circuit protection with a rated breaking capacity of 1000A. With a compact body size of 19.1mm x 12.3mm x 5.1", it is ideal for inline mounting applications in various electronic devices.
SR-5-1A-AP
Eaton Corporation
Eaton Corporation's SR-5-1A-AP fuse has a rated current of 1A and nominal joule integral of 7.5J, suitable for circuit protection with a blow characteristic of time delay. With a max operating temperature of 125°C and rated AC voltage of 250V, it is ideal for applications requiring reliable electrical fuse protection in various industries.
LP-CC-2-1/4
Eaton Corporation LP-CC-2-1/4 fuse, rated 2.25A and 600V AC, features time delay blow characteristic for electric circuit protection. With dimensions of 10.3mm x 38.1mm and a rated breaking capacity of 200kA, it is suitable for inline mounting applications in CE, CSA, and UL standards compliant systems packed in boxes.
045101.5MRL
Littelfuse 045101.5MRL is a NANO fuse with 1.5A rated current and 125V rated voltage, suitable for circuit protection in electronics. It has a very fast blow characteristic, trip time of 5s, and 0.853J nominal joule integral. Ideal for surface mount applications with CSA, CUL, PSE, UL certifications.
FNQ-R-20
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
FWP-600A
Eaton Corporation's FWP-600A fuse offers 66700 J nominal joule integral, 600 A rated current, and 50000 A rated breaking capacity. Ideal for circuit protection in applications requiring a 700 V AC/DC voltage rating. Dimensions: 63.5mm x 72.14mm with TAB/BLADE terminals and CE/CSA/UL certifications.
ATM-20LP
Eaton Corporation's ATM-20LP fuse is a 20A electric fuse with fast blow characteristic. It has dimensions of 10.9mm x 3.81mm x 8.73mm and rated voltage of 32V, suitable for inline mounting applications in circuits requiring protection up to 1000A breaking capacity at temperatures ranging from -40°C to 125°C.
PV-6A10-T
Eaton Corporation's PV-6A10-T fuse, 10x38mm size with 6A rated current and 30J nominal joule integral, is ideal for electric circuit protection. With a rated breaking capacity of 50kA and max operating temperature of 90°C, it suits applications requiring reliable inline mounting in various industries.
PTS120615V050
Eaton Corporation's PTS120615V050 fuse, with a trip time of 0.1s and rated voltage of 15V, is ideal for circuit protection in electronics. Featuring a fast blow characteristic and rated current of 0.5A, it ensures reliable performance in a compact 1206 size package suitable for surface mount applications. Compliant with TUV and UL standards, this electric fuse offers a high breaking capacity of 100A for safeguarding against overcurrent situations.
ATQR12
Mersen S A
Mersen S A's ATQR12 fuse, rated 12A and 600V AC, features time delay blow characteristic. With a compact body size of 10.4mm x 38.1mm, it offers high breaking capacity of 200kA. Ideal for electric circuit protection in various applications with CSA, CE, UL certifications.
FNQ-R-2-1/4
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
JJS-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
FNQ-R-1-1/4
Eaton Corporation's FNQ-R-1-1/4 fuse, rated at 1.25A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring an electric fuse with a high breaking capacity of 200kA.
ANN-50
Eaton Corporation's ANN-50 fuse, with 125V AC and 80V DC voltage ratings, offers a very fast blow characteristic and 2500A breaking capacity. Measuring 81mm x 22.2mm, it features TAB/BLADE terminals for surface mount applications, providing reliable circuit protection with built-in indicator feature.
3403.0271.23
Schurter Ag
Schurter Ag's 3403.0271.23 fuse has a rated current of 0.5A and a rated AC voltage of 277V, with dimensions of 15.4mm x 5.35mm x 5.35mm. It is a time lag electric fuse suitable for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 10ms, meeting standards like CUL, UL, VDE.
BK/ATC-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE;
FNQ-R-10
FNQ-R-10 by Eaton Corp is a 10A CC fuse with 600V AC voltage rating and time delay blow characteristic. It has nickel terminal finish, 200kA rated breaking capacity, and CE/CSA/UL standards compliance. Ideal for electric circuit protection in inline/holder mounting applications.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
FWS-10A20F
Eaton Corporation's FWS-10A20F fuse offers 118J nominal joule integral, 1400V AC voltage rating, and 50000A breaking capacity. Ideal for circuit protection in applications requiring a 10A rated current, such as inline or holder mounting setups. Compliant with CE and IEC standards for reliable performance.
FRS-R-60
Eaton Corporation's FRS-R-60 fuse, rated at 600V AC/DC and 60A, features a time delay blow characteristic. With a compact body size of 27mm x 139.7mm, it is suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, this RK5 class fuse has a high breaking capacity of 200kA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF-1206F250-2
Bourns
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND; JESD-609 Code: e3;
SF-1206S050-2
SF-1206S050-2 by Bourns is a 1206 size surface mount fuse with a rated current of 0.5A and max operating temperature of 105°C. It is commonly used for circuit protection in electronic devices.
SF-1210S150W-2
Bourns SF-1210S150W-2 fuse with 1.5A current, 125V AC voltage, and 0.5J joule integral. Ideal for circuit protection in electronics due to slow blow characteristic and UL reference standard compliance. Dimensions of 3.2mm x 2.5mm x 1.6mm make it suitable for surface mount applications.
SF-1206S100-2
Bourns SF-1206S100-2 fuse, rated 1A with 50A breaking capacity, features slow blow characteristic and trip time of 5s. Sized at 3.1mm x 1.55mm x 0.6mm, it is ideal for electric circuit protection in applications requiring UL standard compliance and surface mounting feature.
SF-1206S200M-2
Bourns SF-1206S200M-2 fuse, rated 2A with 50A breaking capacity, features slow blow characteristic and UL reference standard. Ideal for electric circuit protection in applications requiring surface mounting method. Compact size of 3.2mm x 1.6mm x 0.97mm makes it suitable for various electronic devices.
SF-1206F700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Terminal Finish: TIN;
SF-1206HV25M-2
Bourns SF-1206HV25M-2 fuse, 3.2mm x 1.6mm x 0.97mm, rated at 35V DC with a breaking capacity of 200A. Ideal for circuit protection in electronics due to its UL standard compliance and surface mount feature. Operating temperature range from -55°C to 125°C ensures reliable performance in various environments.
SF-1206F100-2
Bourns SF-1206F100-2 fuse, rated 1A with 50A breaking capacity, features fast blow characteristic and trip time of 60s. Ideal for electric circuit protection in applications requiring surface mount fuses with dimensions of 3.1mm x 1.55mm x 0.6mm.
SF-1206S200-2
Bourns SF-1206S200-2 fuse, rated 2A with slow blow characteristic, has dimensions of 3.1mm x 1.55mm x 0.6mm and operates b/w -20 to 105 °C. Suitable for circuit protection in UL standard applications, it offers a rated DC voltage of 63V and a nominal Joule integral of 0.339J within a surface mount package.
SF-1206S300-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;
SF-1206S700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Blow Characteristic: SLOW;
SF-1206SP700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Reference Standard: UL;
SF-1206S200W-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 65 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Body Length/Diameter: 3.2 mm;
SF-1206HI800M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 24 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND; Packing Method: TR, 7 INCH;
SF-1206S080-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: .8 A; Terminal Shape: WRAPAROUND; Blow Characteristic: SLOW;
SF-1206S800W-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND; Trip Time/Delay: 5 Seconds;
SF-1206S150-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND; Body Width: 1.55 inch;
SF-1206SA630W-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 6.3 A; Terminal Shape: WRAPAROUND; Body Height: 1.08 mm;
SF-1206F125-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND; Body Width: 1.55 inch;
SF-1206F080-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: .8 A; Terminal Shape: WRAPAROUND; Body Width: 1.55 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved