Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
0313.600MXP by Littelfuse is a 3AG fuse with 0.6A rated current and 250V rated voltage, featuring a time lag blow characteristic. With a trip time of 5s and nominal joule integral of 4J, it provides supplemental circuit protection in applications requiring an electric fuse with CE, CSA, and UL reference standards compliance.
Median Price
$1.911
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Newark
1+ parts
$1.890
100+ parts
$1.240
1k+ parts
$1.070
10k+ parts
$1.010
Mouser Electronics
$1.950
$1.140
$0.921
-
DigiKey
$1.139
$0.869
$0.806
Element14
$2.540
$1.500
$1.390
Verical
Farnell
$0.731
$0.713
TTI
$1.100
$0.900
$0.860
Nova Conductors
$0.559
Component Electronics Inc.
$1.150
$0.870
$0.750
TME
$1.370
$0.760
ACDS - Activité Composants Distribution Service
Vyrian
VNN
Argo Parts USA
$0.543
Ampacity Inc.
$0.590
Semicontronic
$0.620
$0.604
$0.601
CoreStaff
$1.378
$0.569
$0.522
Corohmni
$8.324
Aztec Data Supply Inc.
$11.150
Perfect Parts
Continental Prestige Electronics
$0.624
Netroflash
$0.548
$0.532
$0.520
Having a high nominal joule integral means this fuse can effectively absorb a large amount of energy before failing, providing reliable protection for your electrical circuit.
The 5-second trip time allows for a brief delay before the fuse activates, which can be beneficial in preventing nuisance tripping and ensuring proper protection without unnecessary interruptions.
Being a supplemental fuse class ensures that this product offers additional protection to primary fuses, adding an extra layer of safety to your electrical system.
The high maximum operating temperature of 125°C ensures that this fuse can withstand elevated temperatures without compromising its performance or safety.
The option to mount this fuse either inline or in a holder provides flexibility in installation, making it easier to integrate into various electrical setups.
Fuses 0313.600MXP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Fuse Class:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0313.600MXP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1554216002
Molex
WIRE AND CABLE;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
ATM-15
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Dimensions: 10.92mm x 3.81mm x 8.81mm;
LP-CC-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
LPJ-10SPI
Eaton Corporation
Eaton Corporation's LPJ-10SPI fuse, rated at 10A and 600V AC/300V DC, features a J class with time delay blow characteristic. With a compact body size of 20.6mm x 57.2mm, it is designed for inline mounting in electric circuits requiring high breaking capacity of up to 300000 A. Suitable for various applications needing reliable circuit protection with built-in indicator feature.
LP-CC-1-6/10
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.6 A; Terminal Shape: END CAP;
LPJ-150SPI
LPJ-150SPI by Eaton Corporation is a 150A J-class time delay fuse with a rated AC voltage of 600V. It features a compact body size of 41.4mm x 76.2mm and is suitable for circuit protection in applications such as inline mounting or using a holder.
PV-6A10-T
Eaton Corporation's PV-6A10-T fuse, 10x38mm size with 6A rated current and 30J nominal joule integral, is ideal for electric circuit protection. With a rated breaking capacity of 50kA and max operating temperature of 90°C, it suits applications requiring reliable inline mounting in various industries.
0257010.PXPV
Littelfuse
Littelfuse 0257010.PXPV ATO fuse with 10A current, 32V rated voltage, and fast blow characteristic. Ideal for electric circuit protection in UL-standard applications with dimensions of 19.05mm x 5.08mm x 12.19mm and a pre-arcing rating of 115 A2/s.
0468.500NRHF
Littelfuse 0468.500NRHF is a 1206 size fuse with 0.5A rated current and 63V rated voltage. It has a trip time of 0.0015s, making it ideal for circuit protection in applications requiring time delay blow characteristic at temperatures ranging from -55°C to 90°C.
0297010.WXNV
Littelfuse 0297010.WXNV is a MINI fuse with 10A rated current, 32V DC voltage, and 122J nominal joule integral. It has a trip time of 0.03s and dimensions of 10.9mm x 3.8mm x 8.8mm, suitable for inline mounting applications requiring electric circuit protection up to 1000A breaking capacity.
AJT125N
Mersen S A
AJT125N fuse by Mersen S A is a 125A, time delay electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. It features TAB/BLADE terminals, measures 41mm in diameter and 146mm in height, suitable for inline mounting applications. Compliant with CSA, IEC, and UL standards, it is ideal for circuit protection in systems up to 500V DC.
0AKRBK400-BB
Bel Fuse
Bel Fuse 0AKRBK400-BB is a 400A electric fuse with 500V DC voltage rating. It has a compact body of 49x37x24 mm and can withstand temperatures from -40 to 105°C. Ideal for circuit protection in various applications due to its high breaking capacity and tab/blade terminals.
0297002WXNV
Littelfuse 0297002WXNV fuse offers 2A rated current with 32V DC voltage. It has a compact size of 10.9mm x 3.8mm x 8.8mm and operates b/w -40°C to 125°C, making it ideal for circuit protection in various applications like automotive electronics and industrial equipment.
0217.160MXP
0217.160MXP fuse by Littelfuse is a 5x20mm electric fuse with 0.16A rated current and 250V rated voltage. It has a very fast blow characteristic, 0.01s trip time, and 0.01J nominal joule integral. Ideal for circuit protection in applications requiring inline mounting or holder installation at temperatures ranging from -55°C to 125°C.
JJS-500
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE; Dimensions: 31.75mm x 45.21mm;
SS-5-4A-AP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: PIN WIRE; Minimum Operating Temperature: -40 Cel;
FNQ-R-30
Eaton Corporation's FNQ-R-30 fuse, rated at 30A and 600V AC/300V DC, features a time delay blow characteristic. With a CC class and nickel terminal finish, it offers a high breaking capacity of 200kA. Ideal for electric circuit protection in various applications with CE, CSA, and UL standards compliance.
ATM-25
Eaton Corporation's ATM-25 fuse, with 25A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications like automotive and industrial equipment due to its high breaking capacity of 1000A and UL reference standard compliance.
JJS-50
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 50 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
JLLS050
The Littelfuse JLLS050 fuse is rated for 50A and has a fast blow characteristic. With a rated AC voltage of 600V and DC voltage of 300V, it offers circuit protection with a breaking capacity of 200kA. Commonly used in applications requiring inline mounting, this fuse meets CSA and UL standards.
FNQ-R-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0313.600HXP
The Littelfuse 0313.600HXP is a 3AG fuse with a rated current of 0.6 A and a max operating temperature of 125°C. It has a time lag blow characteristic and is commonly used for circuit protection in applications such as inline holders.
0313003.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
0313002.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Packing Method: BULK;
031302.5HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel;
031302.5MXP
031302.5MXP by Littelfuse is a 2.5A, 250V time lag fuse with a rated breaking capacity of 100A. It has a nominal joule integral of 199J and trip time of 5s, suitable for electric fuse circuit protection applications. This fuse features nickel terminal finish, CE/CSA/KC/PSE/UL standards compliance, and operates within -60 to 125°C temperature range.
0313025.HXP
Littelfuse 0313025.HXP fuse, rated 25A and 32V, features time lag blow characteristic. With dimensions of 6.35mm x 31.75mm, it's ideal for electric circuit protection in applications requiring a rated breaking capacity of 300A and pre-arcing rating of 16500 A2/s.
0313025.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
0313003.HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Rated Voltage: 250 V;
0313005.HXP
Littelfuse 0313005.HXP fuse, rated at 5A and 250V, with a trip time of 5s. Ideal for circuit protection in applications requiring a time lag blow characteristic. Measuring 6.35mm x 31.75mm, it has a pre-arcing rating of 140 A2/s and is compatible with CE, CSA, KTL, PSE, and UL standards.
0313.010MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .01 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
0313001.HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; PSE; UL;
0313010.MXP
0313010.MXP fuse by Littelfuse is a 10A, 250V electric fuse with a time lag blow characteristic. It has a rated breaking capacity of 200A and nominal joule integral of 1285J. Ideal for circuit protection in applications requiring supplemental fuses with inline mounting features.
031302.5VXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
0313025.VXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
0313001.MXP
Littelfuse 0313001.MXP fuse, rated at 1A and 250V, with a trip time of 5s. Ideal for circuit protection in applications requiring a supplemental electric fuse with a blow characteristic of time lag. Measuring 6.35mm x 31.75mm, it has a pre-arcing rating of 14 A2/s and is compatible with CE, CSA, PSE, and UL standards.
0313.010HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .01 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 31.75mm;
0313010.HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: END CAP; Nominal Joule Integral: 760 J;
0313005.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
0313.250MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .25 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved