Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SF-1206SA630W-2 fuse offers 8.9J nominal joule integral, 5s trip time, and 6.3A rated current. Ideal for circuit protection in automotive applications with AEC-Q200 and UL standards compliance.
Median Price
$1.540
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.900
1k+ parts
$0.687
10k+ parts
-
Nova Conductors
Ampacity Inc.
$0.600
Continental Prestige Electronics
$0.628
$0.423
Argo Parts USA
Aranea Global
Provides high level of protection against power surges and electrical faults.
Ensures quick response to any overcurrent or short circuit situations, helping to prevent damage to the circuit.
Compact size makes it suitable for use in small electronic devices or tight spaces.
Can handle high current loads and provide reliable circuit protection.
Can withstand high temperatures, making it suitable for a wide range of applications.
Suitable for use in low voltage DC circuits, providing protection against overloads and short circuits.
Easy to install on PCBs, saving space and simplifying assembly.
Fuses SF-1206SA630W-2 attributes and parameters. Explore more Fuses devices from Bourns
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Body Width:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
SF-1206SA630W-2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
PCN Design/Specification - Mult Devs Label 17-Jan-2022
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
International Semiconductor
Unitrode
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Microsemi
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LP-CC-6-1/4
Eaton Corporation
Eaton Corporation LP-CC-6-1/4 fuse, rated 6.25A and 600V AC, features time delay blow characteristic for electric circuit protection. With a rated breaking capacity of 200kA, it is suitable for inline mounting applications in CE, CSA, and UL compliant systems.
3413.0002.22
Schurter Ag
Schurter Ag's 3413.0002.22 fuse is a 3.2x1.6mm electric fuse with 0.05A rated current and 125V AC voltage, suitable for circuit protection in various applications. It has a very fast blow characteristic, surface mounting feature, and meets CUL and UL standards for reliable performance in temperatures ranging from -55 to 90°C.
0297005.WXNV
Littelfuse
Littelfuse 0297005.WXNV fuse, rated at 5A and 32V, offers quick 0.03s trip time with 37J nominal joule integral. Ideal for circuit protection in automotive applications due to its MINI size and TAB/BLADE terminals. Operating range from -40°C to 125°C ensures reliable performance in various conditions.
0034.6618
Schurter Ag 0034.6618 fuse has 34J nominal joule integral, rated AC voltage of 250V, and a max operating temperature of 125°C. It is used for circuit protection with a time lag blow characteristic in applications requiring a rated current of 2A and rated breaking capacity of 35A.
0452001.MRL
Littelfuse 0452001.MRL fuse, rated at 125V, offers a slow blow characteristic with a trip time of 0.002s. With dimensions of 6.1mm x 2.69mm x 2.69mm and a nominal joule integral of 1.98J, it is ideal for circuit protection in applications requiring a nano-sized surface mount electric fuse with WRAPAROUND terminals.
0437.250WR
Littelfuse 0437.250WR is a fast-acting electric fuse with 0.25A rated current and 125V rated voltage. It has a trip time of 5 seconds, making it suitable for circuit protection in applications requiring quick response to overcurrent conditions. With dimensions of 3.2mm x 1.63mm x 0.82mm, this surface mount fuse is ideal for use in electronic devices where space is limited.
LP-CC-3-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 3.5 A; Terminal Shape: END CAP;
0287001.PXCN
Littelfuse 0287001.PXCN fuse has a Nominal Joule Integral of 0.4 J and Trip Time of 0.02 sec. With dimensions 19.1mm x 5.1mm x 12.3mm, it's rated for 1A current and has a breaking capacity of 1000A. Ideal for circuit protection in applications requiring a rated DC voltage of up to 32V with operating temperatures from -40°C to 125°C.
3413.0332.22
Schurter Ag's 3413.0332.22 fuse is a time lag electric fuse with dimensions of 3.2x1.6x0.6mm, rated for 25A current and 32V AC voltage, suitable for circuit protection in applications requiring a high breaking capacity of 100A such as electronics or automotive systems.
ERBRE2R00V
Panasonic
The Panasonic ERBRE2R00V is a 0603 size fuse with a rated current of 2A and a max operating temperature of 125°C. It is designed for circuit protection in applications requiring fast blow characteristics, such as surface mount electronics.
TCF60RN
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: TAB/BLADE;
3413.0114.22
Schurter Ag's 3413.0114.22 fuse is a 1206 size with 0.75A rated current and 32V AC voltage, suitable for electric circuit protection in various applications. With a very fast blow characteristic and gold nickel terminal finish, it offers high reliability with a rated breaking capacity of 50A and pre arcing rating of 0.05 A2/s.
JJS-60
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 60 A; Terminal Shape: END CAP; Body Length/Diameter: 20.57 mm;
25ET
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated DC Voltage: 350 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE;
KTK-3
KTK-3 fuse by Eaton Corporation is a 600V fast blow electric fuse with a rated current of 3A. It has a compact body size of 10.3mm x 38.1mm and can handle high breaking capacity up to 100000A. This fuse is commonly used for circuit protection in various applications, such as inline or holder mounting in electrical systems.
FWP-40A22F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 40 A; Terminal Shape: END CAP;
FNQ-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: .5 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
KTK-R-10
Eaton Corporation's KTK-R-10 fuse, rated at 10A and 600V AC, features fast blow characteristic with a breaking capacity of 200kA. It is a CC class fuse with nickel terminal finish, suitable for electric circuit protection in various applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, it comes in a box packing method.
JJS-600
Eaton Corporation's JJS-600 fuse, rated at 600V/600A with a very fast blow characteristic, offers circuit protection with a breaking capacity of 200kA. It features TAB/BLADE terminals and is suitable for inline mounting applications meeting CE, CSA, and UL standards.
DFJ-40
DFJ-40 by Eaton Corp is a 40A fast blow electric fuse with 600V AC and 450V DC ratings. Measuring 26.92mm x 60.45mm, it features END CAP terminals and a breaking capacity of 200kA. Ideal for inline mounting, it meets CSA and UL standards for circuit protection applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF-1206F250-2
Bourns
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND; JESD-609 Code: e3;
SF-1206S050-2
SF-1206S050-2 by Bourns is a 1206 size surface mount fuse with a rated current of 0.5A and max operating temperature of 105°C. It is commonly used for circuit protection in electronic devices.
SF-1210S150W-2
Bourns SF-1210S150W-2 fuse with 1.5A current, 125V AC voltage, and 0.5J joule integral. Ideal for circuit protection in electronics due to slow blow characteristic and UL reference standard compliance. Dimensions of 3.2mm x 2.5mm x 1.6mm make it suitable for surface mount applications.
SF-1206S100-2
Bourns SF-1206S100-2 fuse, rated 1A with 50A breaking capacity, features slow blow characteristic and trip time of 5s. Sized at 3.1mm x 1.55mm x 0.6mm, it is ideal for electric circuit protection in applications requiring UL standard compliance and surface mounting feature.
SF-1206S200M-2
Bourns SF-1206S200M-2 fuse, rated 2A with 50A breaking capacity, features slow blow characteristic and UL reference standard. Ideal for electric circuit protection in applications requiring surface mounting method. Compact size of 3.2mm x 1.6mm x 0.97mm makes it suitable for various electronic devices.
SF-1206F700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Terminal Finish: TIN;
SF-1206HV25M-2
Bourns SF-1206HV25M-2 fuse, 3.2mm x 1.6mm x 0.97mm, rated at 35V DC with a breaking capacity of 200A. Ideal for circuit protection in electronics due to its UL standard compliance and surface mount feature. Operating temperature range from -55°C to 125°C ensures reliable performance in various environments.
SF-1206F100-2
Bourns SF-1206F100-2 fuse, rated 1A with 50A breaking capacity, features fast blow characteristic and trip time of 60s. Ideal for electric circuit protection in applications requiring surface mount fuses with dimensions of 3.1mm x 1.55mm x 0.6mm.
SF-1206S200-2
Bourns SF-1206S200-2 fuse, rated 2A with slow blow characteristic, has dimensions of 3.1mm x 1.55mm x 0.6mm and operates b/w -20 to 105 °C. Suitable for circuit protection in UL standard applications, it offers a rated DC voltage of 63V and a nominal Joule integral of 0.339J within a surface mount package.
SF-1206S300-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;
SF-1206S700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Blow Characteristic: SLOW;
SF-1206SP700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Reference Standard: UL;
SF-1206S200W-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 65 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Body Length/Diameter: 3.2 mm;
SF-1206HI800M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 24 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND; Packing Method: TR, 7 INCH;
SF-1206F050-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -20 Cel;
SF-1206S080-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: .8 A; Terminal Shape: WRAPAROUND; Blow Characteristic: SLOW;
SF-1206S800W-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND; Trip Time/Delay: 5 Seconds;
SF-1206S150-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND; Body Width: 1.55 inch;
SF-1206F125-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND; Body Width: 1.55 inch;
SF-1206SA1500W-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: WRAPAROUND; Terminal Finish: TIN OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved