Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Littelfuse 0466.750NR is a 1206 size fuse with 0.75A rated current and 63V rated voltage. It offers very fast blow characteristic, 0.2s trip time, and 0.0276J nominal joule integral. Ideal for electric circuit protection in applications requiring surface mount fuses with CSA and UL standards compliance.
Median Price
$0.918
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Newark
1+ parts
$0.312
100+ parts
1k+ parts
10k+ parts
-
Mouser Electronics
$0.990
$0.584
$0.446
$0.351
DigiKey
$1.090
$0.637
$0.486
$0.379
Arrow
$4.507
Chip1Stop
$4.920
TTI
$0.431
Verical
Element14
$0.845
$0.784
$0.722
Farnell
$0.475
$0.405
$0.353
Distrelec
Freelance Electronics
$0.187
$0.196
$0.185
Nova Conductors
$0.410
NAC Semi
$0.400
Vyrian
IBS Electronics
$0.299
R&J Components
Rutronik
$0.562
ComSIT Distribution GmbH
VNN
ACDS - Activité Composants Distribution Service
Prism Electronics
Ampacity Inc.
$0.265
Semicontronic
$0.258
$0.257
CoreStaff
$0.922
Aztec Data Supply Inc.
$15.410
Corohmni
$17.996
Perfect Parts
Kepictronics
Metaverse IC Inc.
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
$0.424
$0.392
GreenTree Electronics
Glotronic Ltd.
Argo Parts USA
Netroflash
$0.402
$0.389
$0.381
This value indicates the energy absorption capacity of the fuse, ensuring reliable protection against electrical faults.
Suitable for use in circuits with a voltage rating of up to 63 volts, making it versatile for various applications.
The fast trip time of 0.2 seconds ensures quick responsiveness to overload or short circuit events, enhancing safety.
The compact 1206 size allows for easy integration into circuit designs and space-saving installation.
The very fast blow characteristic provides instantaneous protection by quickly interrupting the circuit in case of a fault.
Fuses 0466.750NR attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Rated Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Additional Features:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0466.750NR Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
FDLL4148
National Semiconductor
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Micro Commercial Components
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LPJ-10SP
Eaton Corporation
Eaton Corporation's LPJ-10SP fuse, rated at 10A and 600V AC/DC, features a J class with time delay blow characteristic. With dimensions of 20.6mm x 57.2mm, it offers circuit protection with a high breaking capacity of 300kA. Ideal for inline mounting applications, it complies with CE, CSA, and UL standards.
FNQ-R-1/4
Eaton Corporation's FNQ-R-1/4 fuse, rated at 0.25A and 600V AC, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring a high breaking capacity of 200kA. The fuse is designed with an end cap terminal shape and nickel finish for use in inline or holder mounting configurations per CE, CSA, and UL standards.
JJS-600
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 600 A; Terminal Shape: TAB/BLADE; Reference Standard: CSA; UL;
0217.500MXP
Littelfuse
0217.500MXP fuse by Littelfuse is a 0.5A, 250V rated electric fuse with very fast blow characteristic and 0.01s trip time. Measuring 5x20mm, it has a rated breaking capacity of 35A and is suitable for inline mounting applications in circuits requiring protection against overcurrent events.
3413.0002.22
Schurter Ag
Schurter Ag's 3413.0002.22 fuse is a 3.2x1.6mm electric fuse with 0.05A rated current and 125V AC voltage, suitable for circuit protection in various applications. It has a very fast blow characteristic, surface mounting feature, and meets CUL and UL standards for reliable performance in temperatures ranging from -55 to 90°C.
63LET
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 240 V; Rated DC Voltage: 150 V; Rated Current: 63 A; Terminal Shape: TAB/BLADE;
FWP-50A14F
Eaton Corporation's FWP-50A14F fuse offers 200J nominal joule integral, 700V AC/DC rated voltage, and 50A current rating. Ideal for electric circuit protection in various applications with its IEC and UL standards compliance.
AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
MST2A250V
SPC TECHNOLOGY/ MULTICOMP
MST2A250V fuse by Spc Technology/Multicomp is a 2A, 250V slow blow electric fuse with a rated breaking capacity of 100A. With dimensions of 8.35mm x 4.3mm x 7.7mm, it is suitable for circuit protection in applications requiring a nominal joule integral of 32J and operating temperatures ranging from -55°C to 125°C.
FWP-25A14F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 25 A; Terminal Shape: END CAP;
0685H9300-01
Bel Fuse
ELECTRIC FUSE; Terminal Finish: TIN OVER NICKEL; JESD-609 Code: e3;
FNQ-R-2-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Manufacturer Series: FNQ-R;
0AKK-K175-BB
Bel Fuse's 0AKK-K175-BB is a fast blow electric fuse with 6250J nominal joule integral and 175A rated current. With a rated DC voltage of 1000V, it operates b/w -40°C to 125°C, making it ideal for circuit protection in various applications requiring high breaking capacity and inline mounting.
SPFJ160.XXL
SPFJ160.XXL by Littelfuse is a midget fuse with a rated current of 160 A and a rated breaking capacity of 20000 A. It is designed for circuit protection in applications requiring an electric fuse, such as inline or holder mounting in CE, IEC, and UL reference standard compliant systems.
0230003.HXP
Littelfuse 0230003.HXP fuse has a rated current of 3A and nominal joule integral of 77J. With a blow characteristic of time lag, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C. The fuse features a rated AC voltage of 250V and dimensions of 4.7mm x 14.48mm, making it suitable for use in various electronic devices.
0326015.HXP
Littelfuse 0326015.HXP fuse, rated 15A with 250V AC/DC voltage, offers time lag blow characteristic and 245J nominal joule integral. Ideal for circuit protection in applications requiring a fuse size of 3AB, such as inline mounting in electronic devices.
LPJ-10SPI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
0297004.WXNV
Littelfuse 0297004.WXNV is a MINI fuse with 4A rated current, 31J nominal joule integral, and 0.03s trip time. It is used for circuit protection in applications requiring a 32V rated voltage, such as automotive electronics and power distribution systems.
JJN-30
The Eaton Corporation's JJN-30 fuse, rated at 30A and 300V AC/160V DC, features a very fast blow characteristic with a breaking capacity of 200kA. With dimensions of 10.3mm x 22.2mm and an end cap terminal shape, it is commonly used for electric circuit protection in various applications due to its CE, CSA, and UL certifications.
7012540.5IP
Siba
The Siba 7012540.5IP fuse has a rated current of 5A and nominal joule integral of 10J, with dimensions of 6.35mm x 31.8mm. It is designed for very fast blow characteristic circuit protection at rated AC voltage of 600V and DC voltage of 500V, suitable for inline mounting applications in bulk packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
04661.25NRHF
Littelfuse 04661.25NRHF is a 1.25A fast-acting electric fuse with 63V rated voltage and 0.064J nominal joule integral. It is a surface mount 1206 size fuse suitable for supplemental circuit protection applications requiring quick response time of 0.2 seconds.
0466.125NRHF
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .125 A; Terminal Shape: WRAPAROUND;
04661.25NR
Littelfuse 04661.25NR fuse has a rated current of 1.25A and very fast blow characteristic, suitable for electric circuit protection at -55°C to 90°C. With a rated DC voltage of 63V and nominal joule integral of 0.064J, it is ideal for surface mount applications in various industries.
0466.125NR
0466002.NR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
0466001.NRHF
0466001.NRHF by Littelfuse is a 1206 size fuse with 63V rated voltage and 1A current. It offers fast blow characteristic, 0.0423J joule integral, and 0.2s trip time. Ideal for circuit protection in electronics with surface mounting feature.
0466001.NR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND;
0466005.NRHF
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND;
0466.250NR
Littelfuse 0466.250NR fuse, rated at 0.25A and 125V, features a trip time of 0.2s. With dimensions of 3.18mm x 1.52mm x 0.58mm, it is ideal for circuit protection in applications requiring very fast blow characteristic and surface mounting feature.
0466005.NR
0466.250NRHF
Littelfuse 0466.250NRHF is a fast-acting supplemental fuse with 0.25A rated current and 125V AC/DC voltage. It has a trip time of 0.2s, dimensions of 3.18mm x 1.52mm x 0.58mm, and is suitable for electric circuit protection applications requiring a compact surface mount design.
0466003.NR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
0466.500NRHF
Littelfuse 0466.500NRHF fuse, rated at 0.5A and 63V, features fast blow characteristic with trip time of 0.2s. Suitable for circuit protection in electronics applications due to its compact size (3.18mm x 1.52mm x 0.58mm) and surface mounting feature. Compliant with CE, CSA, TUV, and UL standards for reliable performance.
0466.500.NRHF
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
0466002.NRHF
0466.375NR
Littelfuse 0466.375NR fuse with 0.375A rated current, 125V AC/DC voltage, and very fast blow characteristic. Ideal for electric circuit protection in surface mount applications with -55 to 90°C operating temperature range. Dimensions of 3.18mm x 1.52mm x 0.58mm make it suitable for compact designs requiring high breaking capacity of 50A.
046601.5NR
Littelfuse 046601.5NR is a 1206 size supplemental fuse with rated current of 1.5A and very fast blow characteristic. It has a rated AC voltage of 63V, trip time of 14400s, and nominal joule integral of 0.1103J. Ideal for circuit protection in applications requiring electric fuses with surface mounting feature.
0466.200NR
Littelfuse 0466.200NR fuse has rated current of 0.2A and very fast blow characteristic. With dimensions of 3.175mm x 1.524mm x 0.584mm, it is used for electric circuit protection in applications requiring a max operating temperature of 90°C such as CSA and UL standards compliant devices.
0466.200NRHF
Littelfuse 0466.200NRHF fuse, rated at 125V, 0.2A, with fast blow characteristic and 0.00055J nominal joule integral. Ideal for circuit protection in electronics applications due to its compact 1206 size and surface mounting feature. Compliant with CE, CSA, TUV, UL standards for reliable performance.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved