Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
0466001.NRHF by Littelfuse is a 1206 size fuse with 63V rated voltage and 1A current. It offers fast blow characteristic, 0.0423J joule integral, and 0.2s trip time. Ideal for circuit protection in electronics with surface mounting feature.
Median Price
$0.590
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Arrow
1+ parts
$0.604
100+ parts
$0.497
1k+ parts
$0.425
10k+ parts
$0.407
Mouser Electronics
$1.160
$0.685
$0.519
$0.476
DigiKey
$1.250
$0.729
$0.557
-
TTI Europe
$0.402
Farnell
$0.576
$0.482
$0.472
Newark
$0.858
$0.711
$0.672
TTI
$0.465
Master Electronics
$0.419
$0.405
Verical
$0.265
Chip1Stop
Element14
$0.803
$0.763
$0.727
Maritex
$0.294
$0.073
$0.053
$0.043
Nova Conductors
$0.411
Chip Stock
Vyrian
NAC Semi
$0.746
IBS Electronics
$0.682
Sensible Micro Corp
ACDS - Activité Composants Distribution Service
TME
$0.495
$0.489
VNN
LIBRA Elektronik GmbH
Ampacity Inc.
Semicontronic
$0.258
$0.257
Argo Parts USA
$0.398
Netroflash
$0.403
Modulus Dynamics
$0.456
$0.451
$0.438
CoreStaff
$1.027
$0.439
$0.392
Aztec Data Supply Inc.
$7.890
Corohmni
$12.480
Metaverse IC Inc.
Perfect Parts
GreenTree Electronics
Standard Data Resources (Excess)
Authorized Procurement Solutions
Continental Prestige Electronics
$0.440
$0.369
$0.359
Kepictronics
S.R.D Solutions
Formix International (Excess)
Futuretech Components
Speed Components Ltd (Excess)
Infinite Electronics LLP (Excess)
This Fuse has a low energy consumption which helps in efficient power management.
Suitable for various AC voltage applications, providing versatile use.
Quickly responds to overcurrent situations, ensuring timely protection.
TR packaging offers ease of handling and storage for convenience.
Compact size allows for easy integration into a variety of devices.
Wide body construction enhances durability and protection capabilities.
Supplemental classification ensures reliable circuit protection against overloads.
Rated voltage compatibility guarantees optimal performance and safety.
Standard 1206 size makes it easy to replace and install in existing setups.
Wraparound terminals provide secure connections and stability in applications.
Compact dimensions make it suitable for space-constrained installations.
Low-profile design enables installation in tight spaces with ease.
Rated current capacity ensures reliable operation under specified load conditions.
High operating temperature tolerance ensures consistent performance in various environments.
Fast blow characteristic ensures quick response to overloads, preventing damage.
Low operating temperature capability allows for use in extreme cold conditions.
Provides essential circuit protection against overcurrents for safety.
Durable terminal finish ensures long-lasting reliability and connectivity.
High breaking capacity can safely manage high fault currents without damage.
Rated DC voltage support makes it suitable for DC circuit protection applications.
Pre-arching rating indicates the level of protection against circuit arcing events.
Surface mount design simplifies installation and enhances overall circuit protection.
Meets industry standards for quality and safety, ensuring reliable performance.
Fuses 0466001.NRHF attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Fuse Class:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0466001.NRHF Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
ERJ6ENF10R0V
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
Cheng-yi Electronic
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
JJS-600
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 600 A; Terminal Shape: TAB/BLADE; Manufacturer Series: JJS;
FWP-32A22F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 32 A; Terminal Shape: END CAP;
0456020.ER
Littelfuse
Littelfuse 0456020.ER fuse has a rated current of 20A and nominal joule integral of 18J, suitable for circuit protection in applications requiring very fast blow characteristic at 125V AC/DC. With dimensions of 10.1mm x 3.12mm x 3.12mm, it is designed for surface mount installation with a rated breaking capacity of 100A and pre-arcing rating of 18 A2/s.
029707.5L
029707.5L by Littelfuse is a MINI fuse with 7.5A rated current and 32V DC voltage, featuring a trip time of 0.03s and pre arcing rating of 68 A2/s. It is used for circuit protection in applications requiring a compact size fuse with high breaking capacity and UL reference standard compliance.
AGC-20-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ATM10
Mersen S A
The Mersen S A ATM10 fuse is a 10A, 600V fast-blow electric fuse with a midget size and end cap terminal shape. It has a rated breaking capacity of 100kA and is suitable for inline/holder mounting in various applications requiring circuit protection. Compliant with CSA and UL standards, it measures 10mm x 38mm.
FNQ-R-3
Eaton Corporation
Eaton Corporation's FNQ-R-3 fuse, rated 3A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is ideal for circuit protection in applications requiring a rated breaking capacity of 200kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline/holder mounting setups for electrical fuse protection.
37001600430
Littelfuse 37001600430 fuse, rated at 0.16A and 250V, with fast blow characteristic. Ideal for circuit protection in various applications due to its compact TR5 size and high breaking capacity of 35A. Operating temperature range from -40°C to 85°C makes it suitable for diverse environments.
FNM-2-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
ATQR2-8/10
ATQR2-8/10 by Mersen S A is a 2.8A electric fuse with time delay blow characteristic. Rated for 600V AC, it has a 10.4mm x 38.1mm body and can withstand up to 80°C temperature. Ideal for inline mounting, it offers a high breaking capacity of 200kA, meeting CSA, CE, and UL standards.
KTK-R-1
KTK-R-1 fuse by Eaton Corporation is a 1A, 600V fast blow electric fuse with a rated breaking capacity of 200kA. It has a compact body size of 10.3mm x 38.1mm and is commonly used for circuit protection in inline or holder mounting applications.
JJN-30
The Eaton Corporation's JJN-30 fuse, rated at 30A and 300V AC/160V DC, features a very fast blow characteristic with a breaking capacity of 200kA. With dimensions of 10.3mm x 22.2mm and an end cap terminal shape, it is commonly used for electric circuit protection in various applications due to its CE, CSA, and UL certifications.
CM32FC
ELECTRIC FUSE;
8020.5078
Schurter Ag
The Schurter Ag 8020.5078 fuse is a 6.3x32mm electric fuse with a rated current of 10A and a max operating temperature of 85°C. It has a blow characteristic of VERY FAST and is suitable for circuit protection in applications such as inline/holder mounting in UL and CUL reference standards.
0001.2511
Schurter Ag's 0001.2511 fuse is a 5x20mm size with 5A current rating and 250V AC voltage. With a time lag blow characteristic, it offers circuit protection in applications requiring a rated breaking capacity of 1500A and pre arcing rating of 97.5 A2/s.
0326015.HXP
Littelfuse 0326015.HXP fuse, rated 15A with 250V AC/DC voltage, offers time lag blow characteristic and 245J nominal joule integral. Ideal for circuit protection in applications requiring a fuse size of 3AB, such as inline mounting in electronic devices.
ATM-5LP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Maximum Operating Temperature: 125 Cel;
0157010DR
Littelfuse 0157010DR fuse has a rated current of 10A and nominal joule integral of 26.46J, suitable for circuit protection in applications requiring very fast blow characteristic at up to 125V AC/DC. With dimensions of 6.1mm x 2.69mm x 2.69mm, it is designed for surface mounting method using matte tin terminal finish.
FNQ-R-17-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 17.5 A; Terminal Shape: END CAP;
FWP-40A14F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 40 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
04661.25NRHF
Littelfuse 04661.25NRHF is a 1.25A fast-acting electric fuse with 63V rated voltage and 0.064J nominal joule integral. It is a surface mount 1206 size fuse suitable for supplemental circuit protection applications requiring quick response time of 0.2 seconds.
0466.125NRHF
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .125 A; Terminal Shape: WRAPAROUND;
04661.25NR
Littelfuse 04661.25NR fuse has a rated current of 1.25A and very fast blow characteristic, suitable for electric circuit protection at -55°C to 90°C. With a rated DC voltage of 63V and nominal joule integral of 0.064J, it is ideal for surface mount applications in various industries.
0466.125NR
0466002.NR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
0466001.NR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND;
0466005.NRHF
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND;
0466.250NR
Littelfuse 0466.250NR fuse, rated at 0.25A and 125V, features a trip time of 0.2s. With dimensions of 3.18mm x 1.52mm x 0.58mm, it is ideal for circuit protection in applications requiring very fast blow characteristic and surface mounting feature.
0466005.NR
0466.250NRHF
Littelfuse 0466.250NRHF is a fast-acting supplemental fuse with 0.25A rated current and 125V AC/DC voltage. It has a trip time of 0.2s, dimensions of 3.18mm x 1.52mm x 0.58mm, and is suitable for electric circuit protection applications requiring a compact surface mount design.
0466.750NR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: .75 A; Terminal Shape: WRAPAROUND;
0466003.NR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
0466.500NRHF
Littelfuse 0466.500NRHF fuse, rated at 0.5A and 63V, features fast blow characteristic with trip time of 0.2s. Suitable for circuit protection in electronics applications due to its compact size (3.18mm x 1.52mm x 0.58mm) and surface mounting feature. Compliant with CE, CSA, TUV, and UL standards for reliable performance.
0466.500.NRHF
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
0466002.NRHF
0466.375NR
Littelfuse 0466.375NR fuse with 0.375A rated current, 125V AC/DC voltage, and very fast blow characteristic. Ideal for electric circuit protection in surface mount applications with -55 to 90°C operating temperature range. Dimensions of 3.18mm x 1.52mm x 0.58mm make it suitable for compact designs requiring high breaking capacity of 50A.
046601.5NR
Littelfuse 046601.5NR is a 1206 size supplemental fuse with rated current of 1.5A and very fast blow characteristic. It has a rated AC voltage of 63V, trip time of 14400s, and nominal joule integral of 0.1103J. Ideal for circuit protection in applications requiring electric fuses with surface mounting feature.
0466.200NR
Littelfuse 0466.200NR fuse has rated current of 0.2A and very fast blow characteristic. With dimensions of 3.175mm x 1.524mm x 0.584mm, it is used for electric circuit protection in applications requiring a max operating temperature of 90°C such as CSA and UL standards compliant devices.
0466.200NRHF
Littelfuse 0466.200NRHF fuse, rated at 125V, 0.2A, with fast blow characteristic and 0.00055J nominal joule integral. Ideal for circuit protection in electronics applications due to its compact 1206 size and surface mounting feature. Compliant with CE, CSA, TUV, UL standards for reliable performance.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved