Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 4 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
Median Price
$89.620
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Farnell
1+ parts
$56.110
100+ parts
$44.900
1k+ parts
-
10k+ parts
Master Electronics
$58.770
$51.650
$50.710
RS Americas
$63.670
$50.940
$47.750
Verical
$73.739
Mouser Electronics
$66.400
RS (Exports)
$97.840
$78.270
Newark
$88.050
DigiKey
$101.630
$59.200
Element14
$106.790
$72.440
$69.080
DF Sales Co.
$12.900
TEDSS.com
$13.290
Galco
$30.020
Carlton-Bates
$38.070
Kempston Controls
$44.090
Nova Conductors
$49.170
Hutch & Son
$52.820
Electro Sonic
$73.160
$55.180
IBS Electronics
$134.618
$76.779
$76.388
Electronic Supply
Q Components
Vyrian
Mil-Aero Solutions, Inc.
Masline Electronics Inc.
Aztec Data Supply Inc.
$4.707
AZTECH Wire
$10.782
Corohmni
$41.037
Advanced Electronics
$42.932
Modulus Dynamics
$47.202
$46.730
$45.314
Netroflash
$46.711
$45.728
Continental Prestige Electronics
$54.900
Allen Electronics Distributors
Semicontronic
$92.500
$90.188
$89.725
Neutron USA
$189.990
Glotronic Ltd.
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
Fuses FNQ-R-4 attributes and parameters. Explore more Fuses devices from Cooper Industries
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
FNQ-R-4 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LP-CC-12
Eaton Corporation
Eaton Corporation's LP-CC-12 fuse, rated at 12A and 600V AC/150V DC, features a time delay blow characteristic. With a compact body size of 10.3mm x 38.1mm and end cap terminals, it is ideal for inline mounting applications requiring electric circuit protection with a high breaking capacity of 200kA.
ATM-30
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Dimensions: 10.92mm x 3.81mm x 8.81mm;
ATM-10
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; JESD-609 Code: e3;
FNQ-3-2/10
Eaton Corporation's FNQ-3-2/10 fuse, rated 3.2A and 500V, features a time delay blow characteristic for electric circuit protection. With a compact size of 10.41mm x 38.1mm, it is ideal for inline mounting applications requiring a high breaking capacity of 10000A. Compliant with CE, CSA, and UL standards, it is commonly used in industrial equipment for reliable overcurrent protection.
BK/MDL-1-R
BK/MDL-1-R by Cooper Electronic Technologies is a 1A electric fuse with 250V AC voltage rating and 11.498J nominal joule integral. Featuring time delay blow characteristic, it has a rated breaking capacity of 35A. Ideal for inline mounting, this fuse is commonly used in circuit protection applications.
ATQR4
Mersen S A
ATQR4 by Mersen S A is a 4A electric fuse with time delay blow characteristic. Rated for 600V AC and 300V DC, it has a breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it is commonly used in inline/holder mounting applications for circuit protection.
JLLS050.TXP
Littelfuse
Littelfuse JLLS050.TXP fuse, rated 50A/600V, with fast blow characteristic. Ideal for electric circuit protection in applications requiring high breaking capacity of 200kA. Features end cap terminal shape and inline mounting method, meeting CE, CSA, and UL standards.
0ATO020.V
0ATO020.V fuse by Littelfuse has a rated current of 20A, trip time of 0.1s, and nominal joule integral of 520J. It is used for circuit protection in applications requiring a max operating temperature of 125°C and min operating temperature of -40°C. The fuse features TAB/BLADE terminals and a rated breaking capacity of 1000A.
ATM20
The Mersen S A ATM20 fuse is a 20A fast blow electric fuse with 600V AC/DC rated voltage and 100kA breaking capacity. It comes in midget size, measures 10mm x 38mm, and has end cap terminals. Ideal for inline mounting applications requiring reliable circuit protection.
80ET
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated DC Voltage: 350 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE;
ATM-25
Eaton Corporation's ATM-25 fuse, with 25A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications like automotive and industrial equipment due to its high breaking capacity of 1000A and UL reference standard compliance.
0298100ZXEH
Littelfuse 0298100ZXEH fuse with 100A rated current, 31100J nominal joule integral, and 2000A rated breaking capacity. Ideal for circuit protection in applications requiring a max operating temperature of 125°C and min of -40°C. Dimensions: 29.21mm x 19.05mm x 10.67mm, terminal shape TAB/BLADE, mounting feature INLINE/HOLDER.
LP-CC-1-8/10
Eaton Corporation LP-CC-1-8/10 fuse, rated 1.8A and 600V AC, with time delay blow characteristic. Inline/holder mounting for circuit protection in applications requiring 300V DC voltage and 200kA breaking capacity. Meets CE, CSA, UL standards for reliable performance in various electrical systems.
FWP-400A
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
LPJ-175SPI
Eaton Corporation LPJ-175SPI fuse, rated 175A and 600V, features time delay blow characteristic. With dimensions of 41.4mm x 76.2mm, it is suitable for circuit protection in applications requiring a rated breaking capacity of 300kA. This J-class fuse with TAB/BLADE terminals is ideal for inline mounting in electrical systems.
PTS120624V020
Eaton Corporation's PTS120624V020 fuse, with 0.2A rated current and 24V rated voltage, has a fast blow characteristic. It is a surface mount type electric fuse with TUV and UL reference standards, ideal for circuit protection in various applications.
KTK-R-12
Eaton Corporation's KTK-R-12 fuse, rated at 12A and 600V AC, features fast blow characteristic with a breaking capacity of 200kA. With CE, CSA, and UL certifications, it is commonly used for electric circuit protection in various applications due to its nickel terminal finish and inline mounting feature.
FNQ-R-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 30 A; Terminal Shape: END CAP;
520.527
Eska Erich Schweizer
520.527 fuse by Eska Erich Schweizer is a 5x20mm electric fuse with a rated current of 10A and rated AC voltage of 250V. With a blow characteristic of VERY FAST, it offers circuit protection with a nominal joule integral of 204.4J. Ideal for inline mounting, it has a rated breaking capacity of 1500A and min pre-arcing time of 3ms, meeting CE, CUL, IEC, and UL standards.
7010.9810.63
Schurter Ag
The Schurter Ag 7010.9810.63 fuse is a 7x2mm electric fuse with a rated current of 1A and very fast blow characteristic. It has a max operating temperature of 125°C, suitable for circuit protection in various electronic devices. Compliant with CUL and UL standards, it offers a rated breaking capacity of 300A for reliable performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FNQ-R-1-1/4
Eaton Corporation's FNQ-R-1-1/4 fuse, rated at 1.25A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring an electric fuse with a high breaking capacity of 200kA.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Packing Method: BOX;
FNQ-R-12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 12 A; Terminal Shape: END CAP;
Eaton Corporation's FNQ-R-12 fuse, rated at 12A and 600V AC/300V DC, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and CC class, it is commonly used for circuit protection in various applications requiring a high breaking capacity of 200kA.
FNQ-R-1/2
Eaton Corporation's FNQ-R-1/2 fuse, rated at 600V and 0.5A, features time delay blow characteristic. With a rated breaking capacity of 200kA, it is used for electric circuit protection in various applications. Measuring 10.3mm x 38.1mm, it has nickel terminal finish and can be mounted inline or in a holder.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
FNQ-R-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Rated Voltage: 600 V;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
FNQ-R-10 by Eaton Corp is a 10A CC fuse with 600V AC voltage rating and time delay blow characteristic. It has nickel terminal finish, 200kA rated breaking capacity, and CE/CSA/UL standards compliance. Ideal for electric circuit protection in inline/holder mounting applications.
FNQ-R-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
FNQ-R-15 by Eaton Corporation is a 15A time delay fuse with a rated AC voltage of 600V. It has a compact body size of 10.3mm x 38.1mm and is suitable for circuit protection in applications such as inline/holder mounting in electrical systems.
FNQ-R-1/4
Eaton Corporation's FNQ-R-1/4 fuse, rated at 0.25A and 600V AC, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring a high breaking capacity of 200kA. The fuse is designed with an end cap terminal shape and nickel finish for use in inline or holder mounting configurations per CE, CSA, and UL standards.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
FNQ-R-1-1/2
Eaton Corporation's FNQ-R-1-1/2 fuse, rated at 600V and 1.5A with a time delay blow characteristic, is ideal for electric circuit protection. With a body length of 10.3mm and diameter of 38.1mm, it features nickel terminal finish and inline mounting suitable for various applications meeting CE, CSA, and UL standards.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Fuse Class: Supplemental;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Manufacturer Series: FNQ-R;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved