Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Manufacturer Series: FNQ-R;
Median Price
$91.060
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
RS Americas
1+ parts
$76.930
100+ parts
$61.550
1k+ parts
$57.700
10k+ parts
-
Master Electronics
$87.210
$68.290
$68.120
DigiKey
$87.500
$54.302
Airline Hydraulics
$94.620
Verical
$109.423
$83.702
IEC Supply
$917.900
Farnell
Bristol Electronics
$16.800
TEDSS.com
$32.800
Carlton-Bates
$33.460
Kempston Controls
$45.860
Nova Conductors
$53.045
Electro Sonic
$72.120
$52.620
$52.370
Quotebeam
IBS Electronics
$126.583
$103.103
$102.581
Electronic Supply
Vyrian
Q Components
Corohmni
$9.350
Continental Prestige Electronics
$47.798
$46.842
Advanced Electronics
$48.471
$44.593
$41.785
Aranea Global
$51.984
$49.905
Component Stockers USA
$72.720
$58.050
Neutron USA
$179.990
Glotronic Ltd.
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
Fuses FNQ-R-2-1/2 attributes and parameters. Explore more Fuses devices from Cooper Electronic Technologies
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
FNQ-R-2-1/2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
NE555D
Philips Semiconductors
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
261
Deltrol Controls
Other Relays;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Silicon Transistor
ANN-80
Eaton Corporation
Eaton Corporation's ANN-80 fuse, rated at 80A and 125V AC/80V DC, features very fast blow characteristic with a breaking capacity of 2500A. With TAB/BLADE terminals and dimensions of 81mm x 22.2mm, it is ideal for electric circuit protection in various applications requiring surface mount installation and built-in indicator feature.
KTK-R-15
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
BK-MDL-5-R
The Eaton BK-MDL-5-R fuse is a 5A, 250V electric fuse with time delay blow characteristic. With a rated breaking capacity of 200A and nominal joule integral of 32J, it's ideal for inline mounting in various applications requiring circuit protection. Compliant with CE, CSA, and UL standards, it comes in a compact size of 6.4x31.7mm for efficient use.
FNQ-R-4
FNQ-R-4 fuse by Eaton Corp, rated 4A at 600V AC, features time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring high breaking capacity up to 200kA. Suitable for use with CE, CSA, and UL standards in inline/holder mounting configurations.
029707.5WXNV
Littelfuse
Littelfuse 029707.5WXNV is a MINI fuse with 7.5A rated current, 82J nominal joule integral, and 0.03s trip time. Ideal for electric circuit protection in automotive applications due to its compact size (10.9mm x 3.8mm x 8.8mm) and high breaking capacity of 1000A at rated voltage of 32V DC.
0218016.MXP
0218016.MXP by Littelfuse is a 5x20mm electric fuse with a rated current of 16A and a trip time of 0.02s. It has a max operating temperature of 125°C and is commonly used for circuit protection in various applications.
FNQ-R-17-1/2
Eaton Corporation's FNQ-R-17-1/2 fuse, rated at 17.5A and 600V AC/300V DC, features a time delay blow characteristic and CC class. With nickel terminal finish and 200kA breaking capacity, it is ideal for electric fuse circuit protection in various applications. Measuring 10.3mm x 38.1mm, it can be mounted inline or in a holder for efficient use.
FNQ-R-2-1/4
Eaton Corporation's FNQ-R-2-1/4 fuse, rated at 2.25A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm, it is ideal for circuit protection in applications requiring an electric fuse with a high breaking capacity of 200000A.
SR-5-100MA-BK
Eaton Corporation's SR-5-100MA-BK fuse has a rated current of 0.1A and nominal joule integral of 0.015155J, suitable for circuit protection at 250V AC. With a time delay blow characteristic and rated breaking capacity of 35A, it is ideal for applications requiring electric fuse protection in temperatures ranging from -40°C to 125°C.
02170.05HXP
Littelfuse 02170.05HXP fuse, rated at 0.05A and 250V, offers fast blow characteristic with trip time of 0.003s. Ideal for circuit protection in applications requiring 250V AC voltage protection. Measuring 5x20mm, it has a rated breaking capacity of 35A and operates b/w -55°C to 125°C.
0453001MR
Littelfuse 0453001MR NANO fuse with 1A current rating and 125V AC/DC voltage. Very fast blow characteristic, 0.459J joule integral, suitable for electric circuit protection in various applications. TR packing method, CSA/PSE/UL standards compliant, surface mountable with wraparound terminals.
0481.180HXL
Littelfuse 0481.180HXL fuse has a rated current of 0.18A and nominal joule integral of 0.04J, with fast blow characteristic for circuit protection at 125V AC/DC. It is designed for inline mounting applications, featuring built-in alarm and indicator functions, meeting CSA and UL standards.
0215002.MXP
Littelfuse 0215002.MXP fuse, rated 2A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is used for circuit protection in applications requiring a nominal joule integral of 11.68J and max operating temperature of 125°C.
CC12H2A-TR
CC12H2A-TR fuse by Eaton Corp. is a 1206 size with 2A current rating and 63V DC voltage. With trip time of 0.1s, it offers circuit protection with a breaking capacity of 50A. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact dimensions of 3.2mm x 1.6mm x 0.6mm.
LPJ-400SP
Eaton LPJ-400SP fuse, rated 400A at 600V AC/DC, features J class with time delay blow characteristic. Suitable for electric circuit protection in various applications. Compact size of 53.6mm x 38.3mm with TAB/BLADE terminals and high breaking capacity of 300kA.
LPT-45
Eaton Corporation's LPT-45 fuse, rated at 45A and 600V AC/300V DC, features a time lag blow characteristic. With a rated breaking capacity of 200kA, it is used for electric circuit protection in inline/holder mounting applications. Dimensions: 20.57mm x 39.62mm with end cap terminals; complies with CSA and UL standards.
FRS-R-100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
KTK-R-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
KTK-R-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Packing Method: BOX;
FNQ-R-20
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FNQ-R-1-1/4
Eaton Corporation's FNQ-R-1-1/4 fuse, rated at 1.25A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring an electric fuse with a high breaking capacity of 200kA.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Packing Method: BOX;
FNQ-R-12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 12 A; Terminal Shape: END CAP;
Eaton Corporation's FNQ-R-12 fuse, rated at 12A and 600V AC/300V DC, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and CC class, it is commonly used for circuit protection in various applications requiring a high breaking capacity of 200kA.
FNQ-R-1/2
Eaton Corporation's FNQ-R-1/2 fuse, rated at 600V and 0.5A, features time delay blow characteristic. With a rated breaking capacity of 200kA, it is used for electric circuit protection in various applications. Measuring 10.3mm x 38.1mm, it has nickel terminal finish and can be mounted inline or in a holder.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
FNQ-R-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Rated Voltage: 600 V;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
FNQ-R-10 by Eaton Corp is a 10A CC fuse with 600V AC voltage rating and time delay blow characteristic. It has nickel terminal finish, 200kA rated breaking capacity, and CE/CSA/UL standards compliance. Ideal for electric circuit protection in inline/holder mounting applications.
FNQ-R-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
FNQ-R-15 by Eaton Corporation is a 15A time delay fuse with a rated AC voltage of 600V. It has a compact body size of 10.3mm x 38.1mm and is suitable for circuit protection in applications such as inline/holder mounting in electrical systems.
FNQ-R-1/4
Eaton Corporation's FNQ-R-1/4 fuse, rated at 0.25A and 600V AC, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring a high breaking capacity of 200kA. The fuse is designed with an end cap terminal shape and nickel finish for use in inline or holder mounting configurations per CE, CSA, and UL standards.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
FNQ-R-1-1/2
Eaton Corporation's FNQ-R-1-1/2 fuse, rated at 600V and 1.5A with a time delay blow characteristic, is ideal for electric circuit protection. With a body length of 10.3mm and diameter of 38.1mm, it features nickel terminal finish and inline mounting suitable for various applications meeting CE, CSA, and UL standards.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Fuse Class: Supplemental;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Manufacturer Series: FNQ-R;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved