Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schurter Ag 0001.1005 fuse, rated 1.25A and 250V, with 0.538J nominal joule integral. Very fast blow characteristic for electric circuit protection in inline/holder mounting applications. Dimensions of 5x20mm with nickel terminal finish and high breaking capacity of 1500A.
Median Price
$0.940
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$0.706
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.663
$0.506
$0.418
DigiKey
$1.130
Verical
$0.459
Element14
$0.944
$0.868
TME
$0.500
$0.397
$0.334
$0.299
TEDSS.com
$0.350
Electro Sonic
$1.008
$0.917
$0.722
$0.651
Vyrian
Schukat
$0.170
$0.148
Component Stockers USA
$1.020
$0.650
Neutron USA
$24.990
Netroflash
$0.608
$0.589
$0.577
Continental Prestige Electronics
$0.479
Perfect Parts
This fuse has a high joule rating, which means it can handle a significant amount of energy before blowing, providing reliable protection for your electrical system.
The 250V rating ensures compatibility with most common household and industrial electrical systems, making it a versatile choice for various applications.
The compact size of this fuse makes it easy to install in tight spaces or crowded electrical panels, contributing to efficient and convenient use.
With a rating of 1.25A, this fuse is suitable for low to medium current applications, providing precise protection without unnecessary interruptions.
The high maximum operating temperature of 125°C ensures that this fuse can withstand elevated temperatures without compromising its performance or safety.
The very fast blow characteristic of this fuse ensures quick and immediate response to overcurrent conditions, effectively protecting the circuit from damage or malfunction.
The option for inline or holder mounting provides versatile installation possibilities, allowing for easy integration into different types of electrical setups.
Fuses 0001.1005 attributes and parameters. Explore more Fuses devices from Schurter Ag
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0001.1005 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
The SCHURTER Group is the world's leading Swiss technology company ensuring a clean and safe supply of power, ease of use, and sophisticated overall solutions. As a leading innovator, SCHURTER manufactures and distributes components for circuit protection, as well as connectors, switches, and EMC products. In close cooperation with the customers, input systems are developed and manufactured. SCHURTER also offers services for the electronics industry in the field of the printed circuit board assembly. The business unit Solutions coordinates complete solutions from project planning to the manufacture of end products. 20 companies in 17 countries belong to the SCHURTER Group, 14 companies of which have their own production sites. This ensures that all major markets can be served by their own companies. They are coordinated from three hubs: SCHURTER AG in Lucerne for Europe, SCHURTER Inc. in Santa Rosa for America as well as SCHURTER (S) Pte. Ltd. in Singapore for Asia. In addition, SCHURTER has representatives in about 60 countries and works together with over 200 distributors. This close-knit network guarantees that SCHURTER products are securely and quickly available internationally.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
1N4148WT
Sangdest Microelectronics (Nanjing)
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Daco Semiconductor
FNQ-R-17-1/2
Eaton Corporation
Eaton Corporation's FNQ-R-17-1/2 fuse, rated at 17.5A and 600V AC/300V DC, features a time delay blow characteristic and CC class. With nickel terminal finish and 200kA breaking capacity, it is ideal for electric fuse circuit protection in various applications. Measuring 10.3mm x 38.1mm, it can be mounted inline or in a holder for efficient use.
BK/ATM-3
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 10.92 mm;
ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Body Height: 8.81 mm;
FWP-50A14F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 50 A; Terminal Shape: END CAP;
0251015.MXL
Littelfuse
Littelfuse 0251015.MXL is a PICO fuse with 15A rated current, 32V DC voltage, and very fast blow characteristic. Ideal for electric circuit protection in applications requiring a supplemental fuse class with dimensions of 2.8mm x 7.11mm.
ERBRD3R00X
Panasonic
Panasonic ERBRD3R00X fuse, 0402 size, rated 3A current with fast blow characteristic. Ideal for electric circuit protection in surface mount applications. Operating temp range -40 to 125°C, rated DC voltage of 32V and breaking capacity of 35A. CUL and UL certified for quality assurance.
BK/ABC-2-R
BK/ABC-2-R fuse by Eaton Corporation is a 3AB size electric fuse with a rated current of 2A and a rated voltage of 250V. It has a fast blow characteristic and is suitable for circuit protection in applications such as inline holders.
LPJ-10SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
LP-CC-3-2/10
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.2 A; Terminal Shape: END CAP;
0251004.MXL
Littelfuse 0251004.MXL PICO fuse with 4A current, 125V DC/AC rated voltage, and 2.45J joule integral. Very fast blow characteristic for electric circuit protection in various applications. Dimensions of 2.8mm x 7.11mm make it suitable for through-hole mounting in electronics.
KTK-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 1 A; Terminal Shape: END CAP;
FNQ-R-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
LP-CC-1/2
Eaton Corporation LP-CC-1/2 fuse, rated 0.5A and 600V AC/300V DC, with time delay blow characteristic. Inline/holder mounting feature, CE/CSA/UL standards compliant for electric circuit protection applications. Dimensions: 10.3mm x 38.1mm with end cap terminal shape.
LPT-45
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 45 A; Terminal Shape: END CAP;
170M1565
The Eaton Corporation 170M1565 fuse has a rated current of 63A and a nominal joule integral of 215J, suitable for circuit protection in applications requiring a rated breaking capacity of 200kA. With dimensions of 54mm x 21mm x 35mm, it is designed for use with AC/DC voltages up to 690V and features built-in indicator and tab/blade terminals.
ATDR20
Mersen S A
ATDR20 by Mersen S A is a 20A time delay electric fuse with 600V AC and 300V DC ratings. Featuring a body size of 10.4mm x 38.1mm, it has an END CAP terminal shape and inline/holder mounting for circuit protection in various applications meeting CSA and UL standards.
KTK-R-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
029707.5L
029707.5L by Littelfuse is a MINI fuse with 7.5A rated current and 32V DC voltage, featuring a trip time of 0.03s and pre arcing rating of 68 A2/s. It is used for circuit protection in applications requiring a compact size fuse with high breaking capacity and UL reference standard compliance.
PTS120630V012
Eaton Corporation's PTS120630V012 fuse, with 0.12A current and 30V voltage rating, features fast blow characteristic in a 1206 size. Ideal for circuit protection, it has a trip time of 0.2s and operates b/w -40°C to 85°C. Suitable for surface mount applications with TUV and UL standards compliance.
ATM-20LP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0001.2712.11
Schurter Ag
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 6.3 A; Terminal Shape: END CAP;
0001.2534
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 63 V; Rated Current: 10 A; Terminal Shape: END CAP;
0001.2516
Schurter Ag 0001.2516 fuse, rated at 16A and 250V, with a time lag blow characteristic. Ideal for circuit protection in applications requiring a 5x20mm size fuse with a max operating temperature of 125°C. Compliant with CUL, UL, VDE standards and has a pre-arcing rating of 1500 A2/s.
0001.1004
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Body Height: 5.2 mm;
0001.1009
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: END CAP; Blow Characteristic: VERY FAST;
0001.2511
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 5 A; Terminal Shape: END CAP;
0001.2514
Schurter Ag 0001.2514 fuse, rated 10A & 250V, with 400J nominal joule integral. Ideal for circuit protection in applications requiring time lag blow characteristic and rated breaking capacity of 1000A. Dimensions: 5x20mm, terminal shape: end cap, mounting feature: inline/holder.
0001.1001
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: END CAP; Minimum Pre Arcing Time: 20 ms;
0001.1007
Schurter Ag 0001.1007 fuse, rated 2A and 250V, with very fast blow characteristic. Measuring 5x20mm, it has a nominal joule integral of 2J and max operating temp of 125°C. Ideal for circuit protection in various applications due to its high breaking capacity and compact size.
0001.2714.11
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 150 V; Rated Current: 10 A; Terminal Shape: END CAP;
0001.1006
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.6 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
0001.1008
Schurter Ag 0001.1008 fuse, rated 2.5A and 250V, with blow characteristic VERY FAST. Dimensions of 5x20mm, suitable for inline mounting applications in circuits requiring ELECTRIC FUSE protection up to 125°C operating temperature.
0001.2711.11
Schurter Ag 0001.2711.11 fuse, rated 5A and 250V, with time lag blow characteristic. Ideal for circuit protection in applications requiring a 5x20mm size fuse with gold terminal finish and inline mounting feature. Complies with CCC, CUL, VDE, and UL standards for reliable performance in temperatures ranging from -55°C to 125°C.
0001.1014
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Nominal Joule Integral: 141 J;
0001.2508
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 300 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
0001.2501
0001.2501 by Schurter Ag is a 5x20mm electric fuse with a rated current of 0.5A and rated AC voltage of 250V. It has a time lag blow characteristic and is suitable for circuit protection in applications such as inline/holder mounting.
0001.2509
Schurter Ag 0001.2509 fuse, rated 3.15A and 250V, with time lag blow characteristic. Dimensions of 5x20mm, suitable for electric circuit protection in applications requiring a max operating temperature of 125°C. Compliant with CCC, CUL, KTL, METI, UL, VDE standards.
0001.1016
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 16 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
0001.2507
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
0001.1013
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 8 A; Terminal Shape: END CAP; Nominal Joule Integral: 81.9 J;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved