Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Manufacturer Series: AGC;
Median Price
$0.926
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.563
100+ parts
-
1k+ parts
$0.454
10k+ parts
Arrow
$0.780
$0.349
$0.107
$0.097
Interstate Connecting
$0.800
$0.658
$0.648
Mouser Electronics
$0.860
$0.601
$0.409
RS Americas
$0.930
$0.740
DigiKey
$1.030
$0.460
$0.380
RS (Exports)
$0.920
Newark
$1.060
Verical
$1.210
$0.570
Peerless Electronics
$1.500
TTI
$0.151
Master Electronics
$0.785
$0.609
$0.543
Chip1Stop
$0.531
$0.511
Farnell
$0.923
$0.808
Nova Conductors
$0.562
TME
$0.850
IBS Electronics
$1.747
$1.718
$0.252
VNN
Vyrian
Rapid Electronics
$1.201
NAC Semi
$0.238
$0.216
Electro Sonic
$0.495
$0.128
$0.121
ACDS - Activité Composants Distribution Service
R&J Components
Masline Electronics Inc.
Prism Electronics
Bristol Electronics
Semi Source
Ampacity Inc.
$0.096
Semicontronic
$0.100
$0.098
Argo Parts USA
$0.545
Continental Prestige Electronics
$0.551
Netroflash
Allen Electronics Distributors
$0.700
Aztec Data Supply Inc.
$8.119
Corohmni
$17.264
Component Stockers USA
$0.120
$0.110
Perfect Parts
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Authorized Procurement Solutions
Robosynatics
$8.286
$7.673
Fuses BK/AGC-10-R attributes and parameters. Explore more Fuses devices from Cooper Electronic Technologies
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Mounting Feature:
Packing Method:
BK/AGC-10-R Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Formosa Microsemi
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Promax-johnton
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Microsemi
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
ATDR15
Mersen S A
The Mersen S A ATDR15 fuse is a 15A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm and terminal shape of END CAP, suitable for inline/holder mounting applications with a rated breaking capacity of 200000A.
KTK-12
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: END CAP;
ATQR2/10
The Mersen S A ATQR2/10 fuse is a time-delay electric fuse with a rated current of 0.2A and voltage of 600V, suitable for inline mounting applications. It has a compact body size of 10.4mm x 38.1mm and meets CSA, CE, and UL standards, offering high breaking capacity of 200kA for circuit protection at up to 80°C temperature.
0452001.MRL
Littelfuse
Littelfuse 0452001.MRL fuse, rated at 125V, offers a slow blow characteristic with a trip time of 0.002s. With dimensions of 6.1mm x 2.69mm x 2.69mm and a nominal joule integral of 1.98J, it is ideal for circuit protection in applications requiring a nano-sized surface mount electric fuse with WRAPAROUND terminals.
0157010DR
Littelfuse 0157010DR fuse has a rated current of 10A and nominal joule integral of 26.46J, suitable for circuit protection in applications requiring very fast blow characteristic at up to 125V AC/DC. With dimensions of 6.1mm x 2.69mm x 2.69mm, it is designed for surface mounting method using matte tin terminal finish.
213.5
213.5 fuse by Littelfuse is a time lag electric fuse with a rated current of 0.5A and rated AC voltage of 250V. With dimensions of 5.2mm x 20mm, it has a nominal joule integral of 2.9J and can operate b/w -55°C to 125°C. This fuse is commonly used for circuit protection in various applications due to its high breaking capacity of 100A and compliance with standards such as CCC, CE, CSA, IEC, SEMKO, and UL.
FWH-30A14F
Eaton Corporation
The Eaton Corporation FWH-30A14F fuse, rated at 30A and 500V AC/DC, offers a high breaking capacity of 200kA. With a compact body size of 14.3mm x 50.8mm, it is ideal for electric circuit protection in various applications requiring reliable performance and compliance with CE, CSA, and UL standards.
FNQ-R-1-1/4
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
0485001.DR
Littelfuse 0485001.DR is a NANO fuse with rated current of 1A and rated voltage of 250V, suitable for circuit protection in various applications. It has a fast blow characteristic, trip time of 60s, and nominal joule integral of 0.3044J. This surface mount fuse operates b/w -55°C to 125°C with a max breaking capacity of 100A.
0251004.MRT1L
Littelfuse 0251004.MRT1L PICO fuse, rated 125V, 4A with very fast blow characteristic. Ideal for circuit protection in applications requiring supplemental protection at -55 to 125 °C. Features include trip time of 0.004s, nominal joule integral of 2.45J, and terminal shape PIN WIRE.
325.300
The Littelfuse 325.300 fuse is rated at 250V AC with a slow blow characteristic and 0.3A current. Its dimensions are 6.99mm x 32.39mm, suitable for electric circuit protection in various applications like industrial machinery and electronic equipment. Compliant with CSA and UL standards, it features pin wire terminals with tin/lead finish for through-hole mounting.
FNQ-R-1-1/8
Eaton Corporation's FNQ-R-1-1/8 fuse, rated at 1.125A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, this CC-class fuse has a high breaking capacity of 200000A.
0466.125NR
Littelfuse 0466.125NR fuse, rated at 125V and 0.125A, with trip time of 0.2s, is a surface mount electric fuse measuring 3.18mm x 1.52mm x 0.58mm. It has a very fast blow characteristic and matte tin over nickel terminal finish, suitable for circuit protection in applications requiring high breaking capacity up to 50A at temperatures ranging from -55°C to 90°C.
AGU-40
Eaton Corporation's AGU-40 fuse, rated at 40A and 32V AC, features fast blow characteristic and end cap terminal shape. It is an electric fuse with dimensions of 10.41mm x 38.1mm, suitable for inline/holder mounting applications in circuit protection.
0298450.ZXH
Littelfuse 0298450.ZXH MEGA fuse with 450A rated current, 32V DC voltage, and 1050000J nominal joule integral. Ideal for electric circuit protection in automotive applications due to its time delay blow characteristic and compact dimensions of 29.21mm x 19.05mm x 10.67mm.
LPJ-10SPI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
FWP-25A14F
Eaton Corporation's FWP-25A14F fuse offers 25A rated current, 700V AC/DC voltage, and 200kA breaking capacity. With a compact body size of 14.3mm x 50.8mm, it is ideal for circuit protection in various applications like industrial machinery and electrical equipment. The fuse meets CSA, IEC, and UL standards for reliable performance.
3403.0155.24
Schurter Ag
Schurter Ag's 3403.0155.24 fuse is a TIME LAG type with 0.08A rated current and 250V AC/DC voltage, suitable for ELECTRIC FUSE circuit protection in various applications. With dimensions of 10.1mm x 3mm x 3mm and a rated breaking capacity of 200A, it offers reliable performance at temperatures ranging from -55°C to 125°C. Ideal for surface mount installations, this fuse has a nominal joule integral of 0.022J for efficient energy dissipation.
LP-CC-2-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.25 A; Terminal Shape: END CAP;
BK/ATC-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BK-AGC-2-R
The Eaton Corporation BK-AGC-2-R fuse is rated at 2A and 250V, with a fast blow characteristic. It has a nominal joule integral of 17.52J and dimensions of 6.3x32mm, suitable for circuit protection in applications requiring an electric fuse with a rated breaking capacity of 100A.
BK/AGC-2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 31.75mm;
BK/AGC-2-R fuse by Cooper Industries is a 2A fast blow electric fuse with a rated voltage of 250V AC. It has a nominal joule integral of 0.00509 J and a rated breaking capacity of 100A, suitable for inline mounting applications. This nickel-finished fuse conforms to CSA and UL standards, making it ideal for circuit protection in various electronic devices.
BK-AGC-10-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Packing Method: BOX;
BK/AGC-10-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
BK-AGC-15-R
The Eaton Corporation BK-AGC-15-R fuse, rated at 15A and 32V, features a fast blow characteristic with a pre-arcing rating of 0.566 A2/s. With dimensions of 6.3x32mm and terminal shape end cap, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C. Reference standards include CSA and UL for quality assurance.
BK/AGC-15-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
BK-AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
BK/AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
BK/AGC-1-R fuse by Cooper Industries is a 1A, 250V electric fuse with a blow characteristic of fast. It has a body length/diameter of 6.35mm and a body height of 31.75mm, making it suitable for inline/holder mounting. This fuse is commonly used for circuit protection in various applications.
BK/AGX-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Packing Method: BOX;
BK/AGX-3/16
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .188 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 26.47mm;
The Eaton BK/AGX-3/16 fuse is a 6.3x25.4mm fast blow electric fuse with 0.1875A rated current and 250V AC voltage, suitable for inline mounting applications. It features nickel terminal finish, 35A breaking capacity, and CUL standard compliance, making it ideal for circuit protection in various electronic devices.
BK/AGX-3/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .375 A; Terminal Shape: END CAP; Rated Breaking Capacity: 35 A;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .375 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
BK/AGX-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: END CAP; Body Length/Diameter: 6.35 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 30 A; Terminal Shape: END CAP; Fuse Size: 6.3X25.4mm;
BK/AGC-1/8B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .125 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved