Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Packing Method: BOX;
Median Price
$1.650
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.370
100+ parts
-
1k+ parts
10k+ parts
Newark
$0.484
Farnell
$0.881
$0.688
$0.618
Element14
$0.922
$0.579
$0.419
Verical
$1.670
$0.620
$0.560
DigiKey
$1.680
$0.986
$0.753
$0.621
RS Americas
$1.710
$1.550
$1.500
Mouser Electronics
$1.800
$1.540
Master Electronics
$2.024
$1.840
$1.580
PEI Genesis
Chip1Stop
$1.630
$0.586
Nova Conductors
$1.370
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Vyrian
VNN
Bristol Electronics
Rapid Electronics
$1.863
Sea View Technologies
IBS Electronics
$2.283
$2.225
$2.167
Continental Prestige Electronics
$0.689
$0.538
$0.483
Ampacity Inc.
$0.910
Netroflash
Argo Parts USA
Component Stockers USA
$3.110
Allen Electronics Distributors
$3.150
$2.870
Aztec Data Supply Inc.
$14.629
Corohmni
$19.362
Assy Fe
Glotronic Ltd.
Authorized Procurement Solutions
Perfect Parts
Fuses BK/AGX-3 attributes and parameters. Explore more Fuses devices from Cooper Industries
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
BK/AGX-3 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - Shipping Box and Labels 05/Jan/2018
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Leshan Radio
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Continental Device India
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
Vicor
General Instrument
KTK-R-10
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Packing Method: BOX;
ATQR25
Mersen S A
The Mersen S A ATQR25 fuse is a 25A electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it features time delay blow characteristic and is suitable for inline/holder mounting applications in circuits requiring protection up to 300V DC at a max operating temperature of 80°C.
FWP-40A22F
Eaton Corporation
The Eaton Corporation FWP-40A22F fuse is a 40A electric fuse with a rated AC voltage of 700V and rated DC voltage of 500V. With a nominal joule integral of 68J and rated breaking capacity of 200kA, it is suitable for circuit protection in various applications. The fuse has dimensions of 22.2mm x 58mm and can be mounted inline or in a holder.
55900000001
Littelfuse
Littelfuse 55900000001 TR5 fuse rated for 250V AC/DC, with 10mm body length and pin wire terminal shape. Ideal for circuit protection in applications requiring electric fuses, UL and VDE standards compliant. Operating temperature range -40 to 85°C, through-hole mounting in bulk packaging.
BK/ATM-30
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Reference Standard: UL;
JJS-50
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 50 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; UL;
LPJ-70SPI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE;
LP-CC-10
LP-CC-10 by Eaton Corp is a 10A time delay electric fuse with 600V AC & 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Commonly used in inline/holder setups for circuit protection in various applications.
ATM-20LP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -40 Cel;
LP-CC-4
LP-CC-4 by Eaton Corp is a 4A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10mm in body length, it features an end cap terminal shape and inline mounting for circuit protection applications. Compliant with CE, CSA, and UL standards, it offers a high breaking capacity of 200kA.
028707.5PXCN
028707.5PXCN by Littelfuse is a 7.5A electric fuse with a trip time of 0.08s and a rated breaking capacity of 1000A. It is commonly used for circuit protection in applications such as inline holders, with a temperature range of -40 to 125°C.
0466.250NR
Littelfuse 0466.250NR fuse, rated at 0.25A and 125V, features a trip time of 0.2s. With dimensions of 3.18mm x 1.52mm x 0.58mm, it is ideal for circuit protection in applications requiring very fast blow characteristic and surface mounting feature.
LPJ-125SPI
Eaton Corporation's LPJ-125SPI fuse, rated at 125A and 600V AC/300V DC, features a J class with time delay blow characteristic. With a compact body size of 41.4mm x 76.2mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300000A. The fuse comes with built-in indicator and can be mounted inline or in a holder for easy installation.
1245HC100-RTR
The Eaton Corporation 1245HC100-RTR fuse has a rated current of 100A and nominal joule integral of 5000J, suitable for circuit protection in applications requiring fast blow characteristic. With a rated AC voltage of 125V and resistance of 0.29 ohm, it offers reliable performance with a max operating temperature of 125°C. Ideal for surface mount installations, this electric fuse meets CUL standards for quality assurance.
FRN-R-6-1/4
Eaton Corporation's FRN-R-6-1/4 fuse, rated 6.25A at 250V AC/125V DC, features RK5 class with time delay blow characteristic. It has a compact body size of 14.22mm x 50.8mm and high breaking capacity of 200kA, suitable for electric circuit protection in various applications.
ATQR4-1/2
Mersen S A's ATQR4-1/2 fuse, rated 4.5A and 600V AC, features time delay blow characteristic. With a 10.4mm x 38.1mm dimension, it is ideal for electric circuit protection with a high breaking capacity of 200kA at 300V DC. Suitable for inline mounting, it complies with CSA, CE, and UL standards.
PTS120630V012
Eaton Corporation's PTS120630V012 fuse, with 0.12A current and 30V voltage rating, features fast blow characteristic in a 1206 size. Ideal for circuit protection, it has a trip time of 0.2s and operates b/w -40°C to 85°C. Suitable for surface mount applications with TUV and UL standards compliance.
0451.160MRL
0451.160MRL by Littelfuse is a NANO fuse with 0.16A rated current and 125V DC voltage, suitable for electric circuit protection. It has a very fast blow characteristic and a rated breaking capacity of 50A, making it ideal for surface mount applications in various industries. With dimensions of 6.1mm x 2.69mm x 2.69mm, this fuse operates b/w -55°C to 125°C temperatures according to CSA and UL standards.
FNQ-R-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
0452005.MRL
Littelfuse 0452005.MRL is a NANO fuse with 5A rated current and 125V AC/DC voltage. With slow blow characteristic, it offers circuit protection with 53.72J nominal joule integral. Ideal for applications requiring surface mount fuses like electronics and industrial equipment.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BK-AGC-2-R
The Eaton Corporation BK-AGC-2-R fuse is rated at 2A and 250V, with a fast blow characteristic. It has a nominal joule integral of 17.52J and dimensions of 6.3x32mm, suitable for circuit protection in applications requiring an electric fuse with a rated breaking capacity of 100A.
BK/AGC-2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 31.75mm;
BK/AGC-2-R fuse by Cooper Industries is a 2A fast blow electric fuse with a rated voltage of 250V AC. It has a nominal joule integral of 0.00509 J and a rated breaking capacity of 100A, suitable for inline mounting applications. This nickel-finished fuse conforms to CSA and UL standards, making it ideal for circuit protection in various electronic devices.
BK/AGC-10-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Manufacturer Series: AGC;
BK-AGC-10-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Packing Method: BOX;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
BK-AGC-15-R
The Eaton Corporation BK-AGC-15-R fuse, rated at 15A and 32V, features a fast blow characteristic with a pre-arcing rating of 0.566 A2/s. With dimensions of 6.3x32mm and terminal shape end cap, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C. Reference standards include CSA and UL for quality assurance.
BK/AGC-15-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
BK-AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
BK/AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
BK/AGC-1-R fuse by Cooper Industries is a 1A, 250V electric fuse with a blow characteristic of fast. It has a body length/diameter of 6.35mm and a body height of 31.75mm, making it suitable for inline/holder mounting. This fuse is commonly used for circuit protection in various applications.
BK/AGX-3
BK/AGX-3/16
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .188 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 26.47mm;
The Eaton BK/AGX-3/16 fuse is a 6.3x25.4mm fast blow electric fuse with 0.1875A rated current and 250V AC voltage, suitable for inline mounting applications. It features nickel terminal finish, 35A breaking capacity, and CUL standard compliance, making it ideal for circuit protection in various electronic devices.
BK/AGX-3/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .375 A; Terminal Shape: END CAP; Rated Breaking Capacity: 35 A;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .375 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
BK/AGX-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: END CAP; Body Length/Diameter: 6.35 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 30 A; Terminal Shape: END CAP; Fuse Size: 6.3X25.4mm;
BK/AGX-4/10B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .4 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 26.47mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved