Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
Median Price
$0.640
Lifecycle Status
Suppliers In-Stock
35
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.325
100+ parts
-
1k+ parts
$0.271
10k+ parts
$0.258
Arrow
$0.510
$0.124
$0.120
$0.119
Mouser Electronics
$0.540
$0.375
$0.287
$0.277
RS Americas
$0.576
$0.461
Farnell
$0.606
$0.395
$0.382
RS (Exports)
$0.610
$0.539
DigiKey
$0.670
$0.391
$0.299
$0.247
Newark
$0.682
$0.552
Element14
$0.734
$0.480
$0.437
Peerless Electronics
$1.500
Master Electronics
$1.280
$1.100
Verical
$1.606
$1.311
TTI
$0.283
$0.268
Chip1Stop
$1.200
$0.356
PEI Genesis
Avnet
$0.172
$0.137
$0.132
Interstate Connecting
$1.653
$1.295
$0.385
Nova Conductors
$0.334
Carlton-Bates
$0.390
TME
$0.554
IBS Electronics
$0.643
$0.441
$0.422
Electro Sonic
$0.260
$0.158
$0.110
VNN
Rapid Electronics
$1.043
Vyrian
Electronic Expediters
NAC Semi
$0.222
$0.205
R&J Components
Q Components
Vicor Industries, Inc.
A2Z Electronics, Inc.
Bristol Electronics
Component Sense
EMSNET
Elcom Components
Ampacity Inc.
$0.090
Argo Parts USA
$0.324
Bastille Electronics
$0.317
$0.301
$0.297
Continental Prestige Electronics
$0.415
$0.291
Allen Electronics Distributors
$0.550
Aztec Data Supply Inc.
$12.464
Corohmni
$18.994
Perfect Parts
Assy Fe
Glotronic Ltd.
Authorized Procurement Solutions
Netroflash
$0.327
$0.311
Fuses BK/AGC-15-R attributes and parameters. Explore more Fuses devices from Cooper Electronic Technologies
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Mounting Feature:
Packing Method:
BK/AGC-15-R Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - Shipping Box and Labels 05/Jan/2018
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Shenzhen Yixinsemi Electronics
M39029/56351
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
Db Lectro
Dc Components
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
AJT125/400
Mersen S A
Mersen S A's AJT125/400 fuse, rated 125A and 600V, features time lag blow characteristic. With dimensions of 54mm x 181mm, it is a J-class fuse with 200kA breaking capacity. Ideal for electric circuit protection in applications requiring inline mounting and compliance with IEC and UL standards.
LPJ-50SP
Eaton Corporation
Eaton Corporation's LPJ-50SP fuse, rated at 50A and 600V AC/DC, features a J class with time delay blow characteristic. With a compact size of 27mm x 60.3mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline or holder mounting configurations.
LP-CC-3-2/10
Eaton Corporation LP-CC-3-2/10 fuse, rated 3.2A and 600V AC, features time delay blow characteristic. With a 200kA breaking capacity, it is ideal for electric circuit protection in various applications. Measuring 10x38.1mm with end cap terminals, it meets CE, CSA, and UL standards for reliable performance.
ATQR1
The Mersen S A ATQR1 fuse is rated for 600V AC with a 1A current and time delay blow characteristic. It has a body length of 10.4mm, diameter of 38.1mm, and end cap terminal shape. Suitable for inline mounting applications, it offers circuit protection with a high breaking capacity of 200kA at up to 80°C temperature.
FNQ-R-3/4
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .75 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
8020.0608.H.PT
Schurter Ag
Schurter Ag's 8020.0608.H.PT fuse, rated at 40A and 250V AC, offers a time lag blow characteristic with a nominal joule integral of 5867J. Ideal for circuit protection in applications requiring a through-hole mounting feature and high breaking capacity up to 500A.
LPJ-150SPI
LPJ-150SPI by Eaton Corporation is a 150A J-class time delay fuse with a rated AC voltage of 600V. It features a compact body size of 41.4mm x 76.2mm and is suitable for circuit protection in applications such as inline mounting or using a holder.
442
Uchihashi Estec
THERMAL FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 3.5 A; Terminal Shape: WIRE;
FNQ-R-3-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 3.5 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
LP-CC-3-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 3.5 A; Terminal Shape: END CAP;
021801.6HXP
Littelfuse
Littelfuse 021801.6HXP fuse, rated at 1.6A and 250V, with a blow characteristic of time lag. Ideal for circuit protection in applications requiring a supplemental fuse class with dimensions of 5x20mm. Operating temperature range from -55 to 125°C ensures reliable performance in various environments.
0456030.ER
Littelfuse 0456030.ER fuse has a rated current of 30A and nominal joule integral of 81J, suitable for circuit protection with a very fast blow characteristic at 125V AC voltage. It is a surface mount type fuse with dimensions of 10.1mm x 3.12mm x 3.12mm, featuring WRAPAROUND terminals and silver finish for applications requiring high breaking capacity up to 100A.
ANN-500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 80 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE;
LP-CC-30
Eaton Corporation's LP-CC-30 fuse, rated at 30A and 600V AC/300V DC, features time delay blow characteristic. With a compact body size of 10x38.1mm, it is ideal for inline mounting applications requiring electric circuit protection with a high breaking capacity of 200kA.
56000001009
Littelfuse 56000001009 fuse, TR5 size, rated 250V AC/DC. Ideal for circuit protection in electronics. Through-hole mounting, UL and VDE standards compliant, operating temp -40 to 85°C.
37215000411
Littelfuse 37215000411 fuse has a rated current of 5A, trip time of 0.02s, and nominal joule integral of 115J. It is used for circuit protection in applications requiring a time lag blow characteristic at rated AC voltage of 250V.
17.5TDLSJ16
The Eaton Corporation 17.5TDLSJ16 fuse is a 16A electric fuse with a rated AC/DC voltage of 17500V, offering a high breaking capacity of 50000A. With dimensions of 51mm x 292mm and built-in indicator features, it is commonly used for circuit protection in various applications requiring reliable overcurrent protection.
0217002.MXP
0217002.MXP by Littelfuse is a 5x20mm fuse with rated current of 2A and rated voltage of 250V. With very fast blow characteristic, it offers circuit protection for applications requiring a max operating temperature of 125°C. Suitable for use in various industries, complies with standards such as CCC, CE, CSA, IEC, UL.
3413.0009.22
The Schurter Ag 3413.0009.22 fuse is a 3.2x1.6mm surface mount device with a rated current of 0.2A and very fast blow characteristic, suitable for electric circuit protection at 125V AC/63V DC. With dimensions of 3.2mm x 1.6mm x 1.6mm and a max operating temperature of 90°C, it meets CUL and UL standards for various applications requiring quick-acting fuses.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .75 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BK-AGC-2-R
The Eaton Corporation BK-AGC-2-R fuse is rated at 2A and 250V, with a fast blow characteristic. It has a nominal joule integral of 17.52J and dimensions of 6.3x32mm, suitable for circuit protection in applications requiring an electric fuse with a rated breaking capacity of 100A.
BK/AGC-2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 31.75mm;
BK/AGC-2-R fuse by Cooper Industries is a 2A fast blow electric fuse with a rated voltage of 250V AC. It has a nominal joule integral of 0.00509 J and a rated breaking capacity of 100A, suitable for inline mounting applications. This nickel-finished fuse conforms to CSA and UL standards, making it ideal for circuit protection in various electronic devices.
BK/AGC-10-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Manufacturer Series: AGC;
BK-AGC-10-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Packing Method: BOX;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
BK-AGC-15-R
The Eaton Corporation BK-AGC-15-R fuse, rated at 15A and 32V, features a fast blow characteristic with a pre-arcing rating of 0.566 A2/s. With dimensions of 6.3x32mm and terminal shape end cap, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C. Reference standards include CSA and UL for quality assurance.
BK/AGC-15-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
BK-AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
BK/AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
BK/AGC-1-R fuse by Cooper Industries is a 1A, 250V electric fuse with a blow characteristic of fast. It has a body length/diameter of 6.35mm and a body height of 31.75mm, making it suitable for inline/holder mounting. This fuse is commonly used for circuit protection in various applications.
BK/AGX-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Packing Method: BOX;
BK/AGX-3/16
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .188 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 26.47mm;
The Eaton BK/AGX-3/16 fuse is a 6.3x25.4mm fast blow electric fuse with 0.1875A rated current and 250V AC voltage, suitable for inline mounting applications. It features nickel terminal finish, 35A breaking capacity, and CUL standard compliance, making it ideal for circuit protection in various electronic devices.
BK/AGX-3/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .375 A; Terminal Shape: END CAP; Rated Breaking Capacity: 35 A;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .375 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
BK/AGX-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: END CAP; Body Length/Diameter: 6.35 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 30 A; Terminal Shape: END CAP; Fuse Size: 6.3X25.4mm;
BK/AGC-1-1/2B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved