Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP;
Median Price
$52.600
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Farnell
1+ parts
$28.450
100+ parts
$23.210
1k+ parts
-
10k+ parts
Distrelec
$34.738
$29.211
Master Electronics
$45.000
$40.910
$39.010
Sager
$49.390
$43.210
TTI
$32.880
Element14
$58.883
$41.390
$38.444
DigiKey
$78.170
$45.568
RS (Exports)
$78.640
$62.910
Newark
$58.980
Verical
PEI Genesis
NEP Electronics
Forefront Electronics and Design
$9.800
Freelance Electronics
$15.213
Kempston Controls
$17.180
TEDSS.com
$17.500
Galco
$17.810
Carlton-Bates
$24.350
Nova Conductors
$34.645
Hutch & Son
$38.930
Component Electronics Inc.
$50.000
$37.500
$32.500
Electro Sonic
$53.360
$32.380
$32.060
IBS Electronics
$65.264
$59.332
$56.577
Electronic Supply
Vyrian
ACDS - Activité Composants Distribution Service
Q Components
Inland Empire Components Inc.
Electronic Expediters
Mil-Aero Solutions, Inc.
Connector Distribution Corp
Right Parts Inc.
EMSNET
MISTER SPROCKETS
Bisco
LWI Electronics Inc
Aztec Data Supply Inc.
$8.567
Corohmni
$17.931
Semicontronic
$23.480
$22.893
$22.776
Continental Prestige Electronics
$28.180
Netroflash
$32.913
$32.220
Advanced Electronics
$35.981
$33.102
$31.018
Component Stockers USA
$43.520
$32.810
Allen Electronics Distributors
$53.970
$43.180
Neutron USA
$134.990
Argo Parts USA
Glotronic Ltd.
Resion (Excess)
Perfect Parts
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
Assy Fe
SIE Connect GmbH (Excess)
Fuses KTK-15 attributes and parameters. Explore more Fuses devices from Cooper Industries
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Rated Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
KTK-15 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
RN41N-I/RM
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitachi
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Shenzhen Yixinsemi Electronics
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
179020.1
Siba
Siba 179020.1 is a 5x20mm fuse with a rated current of 1A and rated voltage of 250V. It has a very fast blow characteristic and a nominal joule integral of 1.5J, making it suitable for circuit protection in various applications.
FNQ-R-4
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 4 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
JJS-60
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 60 A; Terminal Shape: END CAP; Body Length/Diameter: 20.57 mm;
0273.500H
Littelfuse
Littelfuse 0273.500H is a MICRO fuse with 0.5A rated current, 125V AC/DC voltage, and very fast blow characteristic. It has a trip delay of 14400s and nominal joule integral of 0.0716J. Ideal for circuit protection in applications requiring high breaking capacity and through-hole mounting.
FNQ-7
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 7 A; Terminal Shape: END CAP; Rated Breaking Capacity: 10000 A;
0215.315MXP
0215.315MXP fuse by Littelfuse is a 5x20mm electric fuse with 0.315A rated current and 250V rated voltage, suitable for circuit protection in various applications. It has a time lag blow characteristic, trip time of 0.005s, and nominal joule integral of 0.975J. Ideal for inline mounting, it meets CE, IEC, UL standards with nickel terminal finish.
LPJ-175SPI
Eaton Corporation
Eaton Corporation LPJ-175SPI fuse, rated 175A and 600V, features time delay blow characteristic. With dimensions of 41.4mm x 76.2mm, it is suitable for circuit protection in applications requiring a rated breaking capacity of 300kA. This J-class fuse with TAB/BLADE terminals is ideal for inline mounting in electrical systems.
LP-CC-1-8/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.8 A; Terminal Shape: END CAP;
BK/ABC-2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 2 A; Terminal Shape: END CAP;
DFJ-40
DFJ-40 by Eaton Corp is a 40A fast blow electric fuse with 600V AC and 450V DC ratings. Measuring 26.92mm x 60.45mm, it features END CAP terminals and a breaking capacity of 200kA. Ideal for inline mounting, it meets CSA and UL standards for circuit protection applications.
AJT200EI
Mersen S A
Mersen S A's AJT200EI fuse, rated 200A and 600V AC/500V DC, features time delay blow characteristic. With TAB/BLADE terminals and dimensions of 82.2mm x 81.8mm, it offers circuit protection for high breaking capacity applications in line with UL standards.
1245HC100-RTR
The Eaton Corporation 1245HC100-RTR fuse has a rated current of 100A and nominal joule integral of 5000J, suitable for circuit protection in applications requiring fast blow characteristic. With a rated AC voltage of 125V and resistance of 0.29 ohm, it offers reliable performance with a max operating temperature of 125°C. Ideal for surface mount installations, this electric fuse meets CUL standards for quality assurance.
LP-CC-2-8/10
Eaton LP-CC-2-8/10 fuse, rated 2.8A and 600V AC, features time delay blow characteristic for electric circuit protection. With a compact body size of 10x38.1mm and end cap terminal shape, it is suitable for inline mounting applications with high breaking capacity of 200kA at 300V DC.
FNQ-R-12
Eaton Corporation's FNQ-R-12 fuse, rated at 12A and 600V AC/300V DC, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and CC class, it is commonly used for circuit protection in various applications requiring a high breaking capacity of 200kA.
TCF60
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: TAB/BLADE;
0251001.MXL
Littelfuse 0251001.MXL PICO fuse, rated 125V, 1A with 0.256J joule integral. Very fast blow characteristic in a compact size of 2.8mm x 7.11mm for supplemental circuit protection applications. Operating temperature range -55 to 125 °C, suitable for electric fuse requirements in various industries.
BK-MDL-5-R
The Eaton BK-MDL-5-R fuse is a 5A, 250V electric fuse with time delay blow characteristic. With a rated breaking capacity of 200A and nominal joule integral of 32J, it's ideal for inline mounting in various applications requiring circuit protection. Compliant with CE, CSA, and UL standards, it comes in a compact size of 6.4x31.7mm for efficient use.
0468001.NRHF
Littelfuse 0468001.NRHF fuse, rated at 1A and 63V, features a trip time of 0.0015s. With dimensions of 3.18mm x 1.52mm x 0.58mm, it is ideal for circuit protection in applications requiring a time delay blow characteristic. Compliant with CSA, CUL, and UL standards, it offers a max operating temperature of 90°C and matte tin terminal finish for surface mount installation.
LP-CC-20
Eaton Corporation LP-CC-20 fuse, rated 20A and 600V AC/DC, with time delay blow characteristic. Used for circuit protection in applications requiring a 10mm x 38.1mm body size and end cap terminal shape. Complies with CE, CSA, UL standards and has a high breaking capacity of 200kA.
FNQ-R-1-1/2
Eaton Corporation's FNQ-R-1-1/2 fuse, rated at 600V and 1.5A with a time delay blow characteristic, is ideal for electric circuit protection. With a body length of 10.3mm and diameter of 38.1mm, it features nickel terminal finish and inline mounting suitable for various applications meeting CE, CSA, and UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KTK-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
The Eaton Corporation's KTK-15 fuse is rated for 600V AC with a fast blow characteristic and 15A current. It has a body length of 10.3mm and diameter of 38.1mm, suitable for inline mounting applications requiring electric circuit protection up to 100000A breaking capacity. Compliant with CSA and UL standards, it is ideal for various industrial uses.
KTK-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 10 A; Terminal Shape: END CAP;
Eaton Corporation's KTK-10 fuse, rated at 10A and 600V, features fast blow characteristic with a breaking capacity of 100kA. With CE, CSA, and UL certifications, it is ideal for electric circuit protection in applications requiring inline mounting or holder installation.
KTK-10 fuse by Cooper Electronic Technologies is a 10 A, 600 V fast-blow electric fuse with a rated breaking capacity of 100000 A. It has a body length/diameter of 10.3 mm and terminal shape of end cap. This fuse is commonly used for circuit protection in inline/holder mounting applications.
KTK-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Packing Method: BOX;
ELECTRIC FUSE; Rated Current: 1 A; Terminal Shape: END CAP; Body Height: 38.1 mm; Dimensions: 10.3mm x 38.1mm; Body Length/Diameter: 10.3 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 1 A; Terminal Shape: END CAP;
KTK-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: .5 A; Terminal Shape: END CAP;
KTK-12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Manufacturer Series: KTK;
ELECTRIC FUSE; Rated Current: 12 A; Terminal Shape: END CAP; Rated Breaking Capacity: 100000 A; Rated Voltage: 600 V; Reference Standard: CSA, UL;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: END CAP;
KTK-1-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 1.25 A; Terminal Shape: END CAP;
KTK-1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .125 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
KTK-1-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
KTK-1/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .1 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
KTK-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Manufacturer Series: KTK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved