Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .375 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
Median Price
$2.930
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$5.660
100+ parts
$2.640
1k+ parts
$2.520
10k+ parts
-
DigiKey
$3.312
$2.524
Newark
$7.200
Master Electronics
$2.720
Chip1Stop
$2.660
$1.190
$1.020
Arrow
$1.406
Verical
Nova Conductors
$1.470
Component Electronics Inc.
$2.690
$2.020
$1.750
Rapid Electronics
$2.679
Vyrian
IBS Electronics
$4.071
$3.810
$3.708
Bristol Electronics
VNN
Component Stockers USA
$1.400
$1.040
Continental Prestige Electronics
$1.441
Argo Parts USA
Perfect Parts
Netroflash
$1.397
$1.367
Fuses BK/AGX-3/8 attributes and parameters. Explore more Fuses devices from Cooper Industries
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
BK/AGX-3/8 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
LKN-100
Cooper Electronic Technologies
ELECTRIC FUSE;
0297010.WXNV
Littelfuse
Littelfuse 0297010.WXNV is a MINI fuse with 10A rated current, 32V DC voltage, and 122J nominal joule integral. It has a trip time of 0.03s and dimensions of 10.9mm x 3.8mm x 8.8mm, suitable for inline mounting applications requiring electric circuit protection up to 1000A breaking capacity.
KRP-C-800SP
Eaton Corporation
Eaton Corporation's KRP-C-800SP fuse, rated at 800A and 600V AC/DC, features a time delay blow characteristic. With dimensions of 61mm x 95.3mm and a L-class fuse type, it is suitable for inline mounting applications requiring electric circuit protection. This silver terminal finish fuse has a high breaking capacity of 300kA and complies with CE, CSA, and UL standards.
PV-6A10-T
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1000 V; Rated Current: 6 A; Terminal Shape: TAB/BLADE; Fuse Size: 10x38mm;
ATDR3
Mersen S A
The Mersen S A ATDR3 fuse, rated at 3A and 600V AC/300V DC, features a time delay blow characteristic. With a body size of 10.4mm x 38.1mm and end cap terminals, it offers circuit protection with a high breaking capacity of 200kA. Ideal for inline mounting applications, meeting CSA and UL standards.
KTK-R-25
Eaton Corporation's KTK-R-25 fuse, rated at 25A and 600V AC, features fast blow characteristic with a breaking capacity of 200kA. It is a CC class fuse with nickel terminal finish, suitable for electric circuit protection in various applications. Dimensions are 10.3mm x 38.1mm, designed for inline mounting in holders per CE, CSA, and UL standards.
0215020.MXP
0215020.MXP by Littelfuse is a 20 A fuse with 2600 J nominal joule integral and 0.01s trip time. Ideal for circuit protection in applications requiring a 250 V rated AC/DC voltage, such as inline mounting in electronic devices.
JJS-500
The Eaton Corporation JJS-500 fuse, rated at 600V and 500A, features a very fast blow characteristic with a breaking capacity of 200kA. With TAB/BLADE terminals and dimensions of 101.2mm x 45.2mm, it is commonly used for electric circuit protection in various applications meeting CE, CSA, and UL standards.
ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Body Height: 8.81 mm;
0251004.MAT1L
Littelfuse 0251004.MAT1L PICO fuse, rated 125V, 4A with very fast blow characteristic. Ideal for circuit protection in electronics due to its small size (2.8mm x 7.11mm) and high breaking capacity of 50A at -55°C to 125°C operating range. Compliant with CCC, CSA, PSE, QPL, TUV, UL standards for reliable performance.
KTK-12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
KTK-R-1/10
The Eaton Corporation's KTK-R-1/10 fuse, rated at 0.1A and 600V AC, features a fast blow characteristic with a body size of 10.3mm x 38.1mm. Designed for electric circuit protection, it has a high breaking capacity of 200kA and is suitable for inline mounting applications per CE, CSA, and UL standards.
0452003.MRL
Littelfuse 0452003.MRL fuse, rated at 125V, 3A, with slow blow characteristic and trip time of 0.002s. Nano size for circuit protection in applications requiring a 20.16J nominal joule integral and WRAPAROUND terminal shape. Suitable for surface mount installations with CSA, CUL, UL standards compliance.
0678L9250-02
Bel Fuse
ELECTRIC FUSE; JESD-609 Code: e4; Terminal Finish: Silver (Ag) - with Nickel (Ni) barrier;
JJN-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 160 V; Rated Current: 30 A; Terminal Shape: END CAP;
LP-CC-3-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 3.5 A; Terminal Shape: END CAP;
KTK-R-5
Eaton Corporation's KTK-R-5 fuse, rated at 5A and 600V, features fast blow characteristic with a breaking capacity of 200kA. With CC class and nickel terminal finish, it is ideal for electric fuse circuit protection in various applications requiring inline mounting method. Measuring 10.3mm x 38.1mm, it complies with CE, CSA, and UL standards for reliable performance.
0697-3150-01
Bel Fuse 0697-3150-01 is a MICRO fuse with 3.15A rated current and 250V AC voltage. With a nominal joule integral of 58J, it offers time lag blow characteristic for circuit protection. Ideal for applications requiring electric fuse with through hole mounting feature.
Eaton Corporation's PV-6A10-T fuse, 10x38mm size with 6A rated current and 30J nominal joule integral, is ideal for electric circuit protection. With a rated breaking capacity of 50kA and max operating temperature of 90°C, it suits applications requiring reliable inline mounting in various industries.
SC-40
Eaton Corporation's SC-40 fuse, rated at 40A and 480V, features a G class with fast and time delay blow characteristic. With a rated breaking capacity of 100kA, it is ideal for electric circuit protection in applications requiring inline mounting or holder installation. Compliant with CSA and UL standards, the fuse comes in a box packing method.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BK-AGC-2-R
The Eaton Corporation BK-AGC-2-R fuse is rated at 2A and 250V, with a fast blow characteristic. It has a nominal joule integral of 17.52J and dimensions of 6.3x32mm, suitable for circuit protection in applications requiring an electric fuse with a rated breaking capacity of 100A.
BK/AGC-2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 31.75mm;
BK/AGC-2-R fuse by Cooper Industries is a 2A fast blow electric fuse with a rated voltage of 250V AC. It has a nominal joule integral of 0.00509 J and a rated breaking capacity of 100A, suitable for inline mounting applications. This nickel-finished fuse conforms to CSA and UL standards, making it ideal for circuit protection in various electronic devices.
BK/AGC-10-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Manufacturer Series: AGC;
BK-AGC-10-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Packing Method: BOX;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
BK-AGC-15-R
The Eaton Corporation BK-AGC-15-R fuse, rated at 15A and 32V, features a fast blow characteristic with a pre-arcing rating of 0.566 A2/s. With dimensions of 6.3x32mm and terminal shape end cap, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C. Reference standards include CSA and UL for quality assurance.
BK/AGC-15-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
BK-AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
BK/AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
BK/AGC-1-R fuse by Cooper Industries is a 1A, 250V electric fuse with a blow characteristic of fast. It has a body length/diameter of 6.35mm and a body height of 31.75mm, making it suitable for inline/holder mounting. This fuse is commonly used for circuit protection in various applications.
BK/AGX-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Packing Method: BOX;
BK/AGX-3/16
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .188 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 26.47mm;
The Eaton BK/AGX-3/16 fuse is a 6.3x25.4mm fast blow electric fuse with 0.1875A rated current and 250V AC voltage, suitable for inline mounting applications. It features nickel terminal finish, 35A breaking capacity, and CUL standard compliance, making it ideal for circuit protection in various electronic devices.
BK/AGX-3/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .375 A; Terminal Shape: END CAP; Rated Breaking Capacity: 35 A;
BK/AGX-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: END CAP; Body Length/Diameter: 6.35 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 30 A; Terminal Shape: END CAP; Fuse Size: 6.3X25.4mm;
BK/AGX-1/500B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .002 A; Terminal Shape: END CAP; Body Length/Diameter: 6.35 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved