Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
Median Price
$83.316
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Standard Electric Supply Co.
1+ parts
$48.930
100+ parts
-
1k+ parts
10k+ parts
RS Americas
$70.700
$56.560
$53.030
Airline Hydraulics
$74.150
Element14
$75.970
$53.166
$51.611
Farnell
$79.363
$55.551
Arrow
$87.270
$59.140
Master Electronics
$88.400
$56.380
$56.240
Mouser Electronics
$99.830
$71.240
DigiKey
$104.170
$60.684
RS (Exports)
$110.820
$88.660
Verical
$110.916
Conrad
Future Electronics
$61.830
Galco
$27.490
Carlton-Bates
$36.930
Nova Conductors
$47.840
Electro Sonic
$54.140
$40.810
$40.600
Quotebeam
IBS Electronics
$99.250
$67.962
$67.793
Q Components
Electronic Supply
Vyrian
Powertech Controls
Corohmni
$6.674
Aztec Data Supply Inc.
$18.766
Advanced Electronics
$22.624
Continental Prestige Electronics
$26.940
Allen Electronics Distributors
$30.170
Semicontronic
$37.130
$36.202
$36.016
Netroflash
$46.883
Component Stockers USA
$50.260
Neutron USA
$164.990
Argo Parts USA
Glotronic Ltd.
Authorized Procurement Solutions
Perfect Parts
Fuses LP-CC-2 attributes and parameters. Explore more Fuses devices from Cooper Electronic Technologies
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Mounting Feature:
Packing Method:
LP-CC-2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
261
Deltrol Controls
Other Relays;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
0456020.ER
Littelfuse
Littelfuse 0456020.ER fuse has a rated current of 20A and nominal joule integral of 18J, suitable for circuit protection in applications requiring very fast blow characteristic at 125V AC/DC. With dimensions of 10.1mm x 3.12mm x 3.12mm, it is designed for surface mount installation with a rated breaking capacity of 100A and pre-arcing rating of 18 A2/s.
KTK-15
Eaton Corporation
The Eaton Corporation's KTK-15 fuse is rated for 600V AC with a fast blow characteristic and 15A current. It has a body length of 10.3mm and diameter of 38.1mm, suitable for inline mounting applications requiring electric circuit protection up to 100000A breaking capacity. Compliant with CSA and UL standards, it is ideal for various industrial uses.
FNQ-R-3/4
Eaton Corporation's FNQ-R-3/4 fuse, rated at 600V AC, features a 0.75A current and time delay blow characteristic. With nickel terminal finish and 200kA breaking capacity, it is ideal for electric circuit protection in various applications. Measuring 10.3mm x 38.1mm, this CC-class fuse is commonly used in inline or holder mounting setups.
FNQ-R-2
The Eaton Corporation FNQ-R-2 fuse is a 2A, 600V time delay CC class fuse with a rated breaking capacity of 200kA. It has nickel terminal finish and dimensions of 10.3mm x 38.1mm, suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, it comes in BOX packing method for easy installation.
LP-CC-1-1/4
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.25 A; Terminal Shape: END CAP;
BK/AGC-10-R
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Manufacturer Series: AGC;
FNQ-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
LP-CC-4
LP-CC-4 by Eaton Corp is a 4A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10mm in body length, it features an end cap terminal shape and inline mounting for circuit protection applications. Compliant with CE, CSA, and UL standards, it offers a high breaking capacity of 200kA.
37215000411
Littelfuse 37215000411 fuse has a rated current of 5A, trip time of 0.02s, and nominal joule integral of 115J. It is used for circuit protection in applications requiring a time lag blow characteristic at rated AC voltage of 250V.
CM32F
ELECTRIC FUSE;
FRN-R-35
Eaton Corporation's FRN-R-35 fuse, with 250V AC/125V DC voltage rating and 35A current, features RK5 class and time delay blow characteristic. Ideal for circuit protection in various applications, it comes in a compact size of 20.6mm x 76.2mm with end cap terminal shape for easy mounting in an inline/holder configuration.
0297003WXNV
Littelfuse 0297003WXNV fuse with 9.4J joule integral, 3A rated current, and 32V DC voltage. Ideal for electric circuit protection in applications requiring a compact size of 10.9mm x 3.8mm x 8.8mm and operating temperatures from -40°C to 125°C.
021501.6MXEP
Littelfuse 021501.6MXEP fuse, rated 1.6A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is ideal for circuit protection in applications requiring a rated breaking capacity of 1500A at temperatures ranging from -55 to 125°C.
0297010.WXNV
Littelfuse 0297010.WXNV is a MINI fuse with 10A rated current, 32V DC voltage, and 122J nominal joule integral. It has a trip time of 0.03s and dimensions of 10.9mm x 3.8mm x 8.8mm, suitable for inline mounting applications requiring electric circuit protection up to 1000A breaking capacity.
0466.125NRHF
Littelfuse 0466.125NRHF is a 1206 size fast-acting supplemental fuse with 0.125A rated current and 125V AC/DC voltage. It has a trip time of 0.2s, pre-arcing rating of 0.0004 A2/s, and operates b/w -55°C to 90°C. Ideal for circuit protection in electronics, it meets CE, CSA, TUV, and UL standards for surface mount applications.
0452001.MRL
Littelfuse 0452001.MRL fuse, rated at 125V, offers a slow blow characteristic with a trip time of 0.002s. With dimensions of 6.1mm x 2.69mm x 2.69mm and a nominal joule integral of 1.98J, it is ideal for circuit protection in applications requiring a nano-sized surface mount electric fuse with WRAPAROUND terminals.
ATQR5
Mersen S A
The Mersen S A ATQR5 fuse, rated at 5A and 600V AC/300V DC, features a time delay blow characteristic. With a compact size of 10.4mm x 38.1mm, it is ideal for circuit protection in various applications. Compliant with CSA, CE, and UL standards, it offers a high breaking capacity of 200kA.
ATQR12
Mersen S A's ATQR12 fuse, rated 12A and 600V AC, features time delay blow characteristic. With a compact body size of 10.4mm x 38.1mm, it offers high breaking capacity of 200kA. Ideal for electric circuit protection in various applications with CSA, CE, UL certifications.
FNM-2-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LP-CC-30
Eaton Corporation's LP-CC-30 fuse, rated at 30A and 600V AC/300V DC, features time delay blow characteristic. With a compact body size of 10x38.1mm, it is ideal for inline mounting applications requiring electric circuit protection with a high breaking capacity of 200kA.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 30 A; Terminal Shape: END CAP;
LP-CC-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 10 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
LP-CC-10 by Eaton Corp is a 10A time delay electric fuse with 600V AC & 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Commonly used in inline/holder setups for circuit protection in various applications.
LP-CC-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 25 A; Terminal Shape: END CAP;
LP-CC-25 fuse by Eaton Corporation is a time delay electric fuse with a rated current of 25 A and a rated AC voltage of 600 V. It is commonly used for circuit protection in applications such as inline or holder mounting.
LP-CC-20
Eaton Corporation LP-CC-20 fuse, rated 20A and 600V AC/DC, with time delay blow characteristic. Used for circuit protection in applications requiring a 10mm x 38.1mm body size and end cap terminal shape. Complies with CE, CSA, UL standards and has a high breaking capacity of 200kA.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
LP-CC-6
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 6 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 6 A; Terminal Shape: END CAP;
LP-CC-6 by Eaton Corp is a 6A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Ideal for inline mounting, it meets CE, CSA, and UL standards for circuit protection applications.
LP-CC-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 15 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
Eaton Corporation LP-CC-15 fuse, rated 15A and 600V, features time delay blow characteristic. With dimensions of 10.3mm x 38.1mm, it is used for electric circuit protection in applications requiring a rated breaking capacity of 200000A. It conforms to CE, CSA, and UL standards for safe use.
LP-CC-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 3 A; Terminal Shape: END CAP;
The Eaton LP-CC-3 fuse, with 3A rated current and 600V AC voltage, features time delay blow characteristic. Measuring 10.3mm x 38.1mm, it is ideal for electric circuit protection in various applications. With a rated breaking capacity of 200kA and CE/CSA/UL certifications, it is commonly used in inline or holder mounting setups.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved