Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's FN3256H-16-29 is a 480V UL/CSA/ENEC-14 approved EMI mains filter with 16A rated current. Featuring a three-phase filter type, it operates at -25 to 100°C temperatures and offers high pot of 3000V. Ideal for panel mounting, this filter is designed for applications requiring effective electromagnetic interference suppression.
Median Price
$161.440
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
< 1k
Farnell
1+ parts
$135.340
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$152.160
$138.180
DigiKey
$153.890
$138.188
RS Americas
$154.470
Master Electronics
$155.560
$145.560
Element14
$167.320
$150.243
TTI Europe
$176.538
Bürklin Elektronik
$184.180
$162.080
Verical
$202.228
$189.228
RS (Exports)
$220.124
Newark
$230.060
$207.780
TTI
$138.190
Bristol Electronics
$132.540
$108.683
Electro Sonic
$160.230
$149.930
TME
$174.020
IBS Electronics
$239.474
Dan-Mar Components
NAC Semi
$183.960
Cogito LLC
ACDS - Activité Composants Distribution Service
Perfect Parts
Abacus Technologies
GreenTree Electronics
Having approvals from UL, CSA, and ENEC-14 ensures the product meets international safety standards and can be trusted for quality and reliability.
With a high rated voltage of 480 V, this EMI mains filter is suitable for industrial applications where high voltage levels are present.
Being a three-phase EMI filter, it can effectively reduce electromagnetic interference in complex power systems with multiple phases.
The high maximum operating temperature of 100°C ensures that this filter can withstand harsh environmental conditions and continuous operation without overheating.
With a low minimum operating temperature of -25°C, this filter is suitable for use in cold environments or applications where temperature fluctuations are common.
The compact width of 82.0 mm allows for easy integration and installation of this filter in tight spaces or crowded panels.
Operating at a frequency of 60Hz, this filter is compatible with standard power systems and equipment used in many industrial settings.
The moderate length of 110 mm provides a good balance between size and performance, making this filter versatile and suitable for various applications.
With a high pot rating of 3000 V, this filter can withstand high voltage surges and spikes, protecting connected equipment from damage.
The low maximum leakage current of 1 mA ensures that the filter efficiently suppresses electromagnetic interference without introducing additional safety risks.
Featuring a panel mount design, this filter can be securely attached to equipment or enclosures for stable and reliable operation.
The compact dimensions of 110.0 x 82.0 x 70.0 mm (4.331 x 3.228 x 2.756 inches) make this filter easy to handle, install, and fit into various setups.
With a rated current of 16 A, this filter is suitable for applications requiring moderate current levels, providing reliable EMI suppression without overload risks.
The height of 70 mm strikes a good balance between space-saving design and performance, allowing for efficient EMI filtering without taking up too much vertical space.
EMI Mains Filters FN3256H-16-29 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
PCN Design/Specification - UKCA Design 28/Jun/2021
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
EU2B-YS3103F
Idec
ROTARY SWITCH;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
10VR6
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
SSR21NH-031810
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Length: 23 mm; Width (mm): 23; Rated Voltage: 250 V; Height: 14.5 mm;
RSEN-2010D
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 35 mm; Maximum Leakage Current: 1 mA; Approvals (V): UL; CSA; EN; Maximum Operating Temperature: 85 Cel;
SCR22-060-1R0A075JH
KEMET Corporation
KEMET's SCR22-060-1R0A075JH is a UL-approved EMI mains filter with 250V rated voltage and 6A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and is a single-phase filter. Ideal for through-hole mounting applications in various industries.
FIL-1S-1-10A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): IEC; UL; VDE; Length: 99.5 mm; Rated Voltage: 230 V; Width (mm): 45;
400APH12L
TE Connectivity's 400APH12L is a UL-approved EMI mains filter with a rated voltage of 520V. It features a three-phase filter type, rated current of 400A, and high pot of 2200V. Ideal for panel mount applications, it operates b/w -10°C to 50°C at an operating frequency of 50-60Hz.
SC-02-30G
KEMET Corporation's SC-02-30G EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operates b/w -25°C to 105°C. It is UL approved for single-phase filtering applications. With dimensions of L17.5xB14.0xH17.5 mm, it is designed for through-hole mounting with a rated current of 2A.
3-103-676
Schurter Ag
Schurter Ag's 3-103-676 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 10A, and max operating temperature of 100°C. Ideal for panel mounting applications requiring effective filtering at frequencies of 50/60Hz.
B84143A0025R105
TDK
TDK B84143A0025R105 is a 520V UL/ENEC-10 approved EMI mains filter with 6 terminals. It offers a rated current of 25A, high pot of 2720V, and max leakage current of 15mA. Ideal for panel mounting in applications requiring three-phase EMI filtering at 50/60Hz frequency.
FN2410-32-33
Schaffner Holding Ag
FN2410-32-33 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 32A rated current. Operating at temperatures from -25°C to 100°C, it offers high pot of 1100V and max leakage current of 3.4mA. Ideal for DIN rail mounting applications with dimensions of L108.0xB93.0xH76.0mm, this filter operates at an operating frequency of 400Hz.
10VSB1
The TE Connectivity 10VSB1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 3 dB at min frequency and 46 dB at max frequency. With a rated voltage of 250 V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
7448030417
Wuerth Elektronik & Kg
Wurth Elektronik 7448030417 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4A rated current. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals in applications requiring EMI mains filtering.
FN3256H-120-35-R69
Schaffner's FN3256H-120-35-R69 is a 3-phase EMI filter with 480V rated voltage, 120A current, and -25 to 100°C operating temperature range. Approved by EN, IEC, CSA, UL for applications requiring high-potential of 1300V and max leakage current of 0.9mA. Ideal for panel mounting in industrial settings with a frequency of 60Hz.
SC-10-30J
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 3 MILLI HENRY; Height: 33 mm;
SU7VC-05011
KEMET Corporation's SU7VC-05011 EMI Mains Filter has a rated voltage of 125V and min insulation resistance of 100 Mohm. With a filter type of SINGLE PHASE EMI FILTER, it operates b/w -25 to 75 °C and is suitable for THROUGH HOLE MOUNT applications at a rated current of 0.5A.
NAC-20-472-D
Cosel
The Cosel NAC-20-472-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 20A rated current. With a compact size of L92.0xB53.0xH41.0mm, it operates b/w -40°C to 85°C making it ideal for DIN rail mounting in various applications requiring efficient EMI mains filtering at 60Hz frequency.
SCR38C-130-S1R4A015JH
KEMET's SCR38C-130-S1R4A015JH is a 3-phase EMI filter with UL approval, rated for 500V and 13A. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a diameter of 50mm. Ideal for applications requiring efficient mains filtering in industrial settings.
B84134-F12-A1
The TDK B84134-F12-A1 is a 3-phase EMI mains filter with approvals from UL, CSA, and VDE. It has a rated voltage of 250V, rated current of 12A, and high pot of 2700V. With dimensions of L125xB65xH60 mm, it is ideal for panel mount applications requiring effective filtering at 50/60Hz frequencies.
SC-30-12JH
KEMET Corporation's SC-30-12JH is a 250V UL-approved EMI mains filter with 30A rated current. Featuring a single-phase filter type, it offers high insulation resistance of 100 Mohm and operates b/w -25°C to 105°C. Ideal for applications requiring effective electromagnetic interference suppression in various electronic systems.
20EMC1
TE Connectivity's 20EMC1 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -10°C to 40°C, with max leakage current of 0.73mA. Ideal for PANEL MOUNT applications in EMI suppression at 50Hz frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved