Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SS26V-070510 by KEMET Corporation is a single-phase EMI filter with a rated voltage of 250 V. It has a min insulation resistance of 100 Mohm and can operate in temperatures ranging from -25 to 120 °C. This filter is commonly used for EMI mains filtering applications.
Median Price
$4.605
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
$6.920
100+ parts
$4.170
1k+ parts
$1.700
10k+ parts
$1.490
Verical
-
$2.290
Nova Conductors
$1.650
Vyrian
Rapid Electronics
Advanced Electronics
$1.549
$1.410
$1.270
Argo Parts USA
$1.551
Continental Prestige Electronics
$1.520
Netroflash
Aztec Data Supply Inc.
$1.895
Ampacity Inc.
$1.950
Corohmni
$3.491
AZTECH Wire
$18.180
$17.460
$17.110
$16.770
Perfect Parts
The high minimum insulation resistance ensures optimal safety and reliability, making this EMI mains filter a great choice for protecting sensitive electronic devices.
With UL certification, this product meets rigorous safety standards, providing peace of mind and making it an excellent choice for various applications.
The 250 V rated voltage allows this single-phase EMI filter to effectively handle power fluctuations, ensuring stable and efficient operation of connected equipment.
Designed specifically for single-phase applications, this filter effectively reduces electromagnetic interference, making it ideal for enhancing the performance of electronic devices.
With a maximum operating temperature of 120°C, this filter can withstand high temperatures, offering excellent durability and reliability even in demanding environments.
The impressive minimum operating temperature of -25°C allows this filter to function reliably in cold conditions, making it suitable for various industrial and commercial settings.
The compact width of 20.5mm makes this filter easy to integrate into tight spaces, making it a convenient choice for installations with limited room.
With a length of 26mm, this filter offers a compact and streamlined design, facilitating ease of installation and ensuring efficient space utilization.
The high-potential rating of 500V ensures excellent insulation properties, making this filter a reliable choice for preventing electrical leakage and improving overall system safety.
The tray packing method provides secure and organized packaging, allowing for easy handling, transport, and storage of this filter, making it an efficient choice for manufacturers.
The through-hole mounting type simplifies installation and enhances stability, making this filter a convenient and reliable solution for various circuit board applications.
With its compact dimensions, measuring 26.0mm in length, 20.5mm in width, and 30.5mm in height, this filter offers versatility and compatibility with a wide range of electronic systems.
The 0.7A rated current capacity allows this filter to effectively handle electrical loads, making it a suitable choice for various consumer and industrial electronic devices.
The 30.5mm height of this filter ensures a low-profile design, making it easy to fit into space-limited enclosures or equipment racks while still maintaining efficient EMI suppression.
EMI Mains Filters SS26V-070510 attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Approvals (V):
Filter Type:
Height:
High Pot:
Minimum Insulation Resistance:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
Hy Electronic
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Solid State Devices
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
5500.2655.01
Schurter Ag
Schurter Ag's 5500.2655.01 EMI Mains Filter is a single-phase filter with 250V rated voltage and 16A current. It has approvals from ENEC-10, UL, VDE and operates at temperatures ranging from -40°C to 100°C. Ideal for chassis mounting applications requiring min insulation resistance of 2 Mohm and max leakage current of 0.5 mA.
FN2415-6-29
Schaffner Holding Ag
Schaffner Holding Ag's FN2415-6-29 is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 6A current. Operating at -25 to 100°C, it offers high pot of 1100V and max leakage current of 9.4mA. Ideal for panel mounting applications with dimensions L94.0xB56.0xH45.4mm, this filter operates at 60Hz frequency for effective EMI suppression.
3-103-709
Schurter Ag's 3-103-709 EMI Mains Filter is a single-phase filter with 240V rated voltage and 3A current. With approvals from CSA, EN, IEC, and UL, it operates b/w -40°C to 100°C. Ideal for panel mounting applications due to its compact size of 25mm x 85mm x 89.5mm.
PLA10AN5521R0R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Additional Features: INDUCTANCE 5.5 MILLI HENRY; STANDARD WINDING TYPE; Height: 17.5 mm;
B84112G0000B030
TDK's B84112G0000B030 EMI Mains Filter is UL, CUL, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, 3A rated current, and high pot of 2700V. Ideal for panel mounting applications requiring effective noise suppression in electrical systems.
RN212-0.5-02-18M
RN212-0.5-02-18M by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 300V rated voltage and 0.5A rated current. It operates b/w -40°C to 100°C, suitable for applications requiring EMI mains filtering. With UL, IEC, VDE, and ENEC-10 approvals, it's ideal for through-hole mounting in various electronic devices.
SC-15-05J
KEMET Corporation
KEMET Corporation's SC-15-05J is a UL-approved EMI mains filter with 100 Mohm min insulation resistance, rated for 250V and 15A. This single-phase filter operates b/w -25°C to 105°C, measuring L34.0xB23.0xH33.0 mm and is mounted through hole. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
FN406-8.4-02
Schaffner Holding Ag's FN406-8.4-02 EMI Mains Filter is a single-phase filter with 250V rated voltage and 8.4A rated current. It has approvals from UL, CSA, and ENEC-14, operates at -25 to 100°C, and offers high pot of 2000V. Ideal for applications requiring through-hole mounting in electronics to reduce electromagnetic interference on mains power lines.
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 15 A; Dimensions: L34.0XB23.0XH33.0 (mm)/L1.339XB0.906XH1.299 (inch); Minimum Insulation Resistance: 100 Mohm; Additional Features: INDUCTANCE 0.5 MILLI HENRY; Rated Voltage: 250 V;
250APH12P
The TE Connectivity 250APH12P is a UL-approved EMI mains filter with a rated voltage of 690V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, with high pot up to 2640V and max leakage current of 330mA. Ideal for panel mounting applications, it measures 160mm in width, 250mm in length, and stands at a height of 125mm.
1-6609032-3
TE Connectivity's 1-6609032-3 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at 0.15 MHz and 65 dB at 10 MHz. With a rated voltage of 250V and rated current of 10A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
FN406-6-02
The Schaffner Holding Ag FN406-6-02 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 6A rated current. With dimensions of L45.0xB15.0xH28.0 (mm), it operates at temperatures from -25 to 100 °C and has a high pot of 2000V. Ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
NAH-10-472
Cosel
The Cosel NAH-10-472 is a single-phase EMI filter with 250V rated voltage and 10A rated current. It has approvals from UL, CSA, VDE, and ENEC-10 for quality assurance. Ideal for chassis mount applications in electronics to reduce electromagnetic interference at operating temperatures ranging from -40°C to 85°C.
SU9VF-03060
KEMET Corporation's SU9VF-03060 EMI Mains Filter is a single-phase filter with 250V rated voltage and 0.3A rated current. With a temperature range of -25 to 120°C, it is suitable for through-hole mounting applications. This compact filter, measuring 11mm in width and 17mm in height, is ideal for noise suppression in electronic devices.
7448042001
Wuerth Elektronik & Kg
Wurth Elektronik 7448042001 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -40 to 125 °C, has high pot of 1500V, and dimensions of L30.0xB19.0xH28.0 mm. Ideal for EMI mains filtering in various applications due to its through-hole mounting type and compact size.
RD7137-6-12M0
DATA LINE FILTER;
3-103-715
Schurter Ag's 3-103-715 EMI Mains Filter is a single-phase filter with 250V rated voltage and 3A rated current. With approvals from CSA, EN, IEC, and UL, it operates b/w -40°C to 100°C. Ideal for panel mounting applications in various industries due to its compact size of 25mm x 104mm x 82.6mm.
CMS3-4-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.95 A; Maximum Operating Temperature: 160 Cel; Mounting Type: SURFACE MOUNT; Manufacturer Series: CMS; Minimum Operating Temperature: -40 Cel;
SS11V-R10093-CH
KEMET's SS11V-R10093-CH EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operates b/w -25°C to 120°C. With a high pot of 500V, it is ideal for single-phase EMI filtering applications. This through-hole mount filter measures L22.0xB14.5xH21.5mm and can handle a rated current of 1A efficiently.
FN2410H-100-34
The Schaffner Holding Ag FN2410H-100-34 is a single-phase EMI mains filter with 520V rated voltage and 100A rated current. It has approvals from UL, CSA, and ENEC-14, suitable for applications requiring high pot of 2250V and max leakage current of 3.4mA. With DIN rail mounting and compact dimensions of L140.0xB115.0xH100.0 mm, it operates b/w -25°C to 100°C at an operating frequency of 250Hz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SS26V-070510
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 51 MILLI HENRY; Terminal Finish: NOT SPECIFIED;
SS26V-R100330
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Height: 30.5 mm; Terminal Finish: NOT SPECIFIED; Dimensions: L26.0XB20.5XH30.5 (mm)/L1.024XB0.807XH1.201 (inch); Operating Frequency (Hz): 50Hz;
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Height: 30.5 mm; Packing Method: TRAY;
SS26V-050880
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Mounting Type: THROUGH HOLE MOUNT; Packing Method: TRAY; Minimum Insulation Resistance: 100 Mohm; Maximum Operating Temperature: 120 Cel;
SS26V-060640
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Height: 30.5 mm; Maximum Operating Temperature: 120 Cel; High Pot: 500 V; Dimensions: L26.0XB20.5XH30.5 (mm)/L1.024XB0.807XH1.201 (inch);
SS26V-080350
SS26V-080350 by KEMET Corp is a UL approved EMI mains filter with 250V rated voltage, 0.8A current, and 100 Mohm insulation resistance. It operates b/w -25°C to 120°C, suitable for single-phase EMI filtering applications. Dimensions are L26.0xB20.5xH30.5 mm for through-hole mounting in trays at high pot of 500V.
SS26V-100250
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Dimensions: L26.0XB20.5XH30.5 (mm)/L1.024XB0.807XH1.201 (inch); Approvals (V): UL; Rated Voltage: 250 V; Width (mm): 20.5;
SS26V-180092
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Mounting Type: THROUGH HOLE MOUNT; Packing Method: TRAY; Width (mm): 20.5; High Pot: 500 V;
SS26V-R070680
SINGLE PHASE EMI FILTER; Rated Current: .7 A; High Pot: 500 V; Width (mm): 20.5; Length: 26 mm; Height: 30.5 mm;
SS26V-R150162
SS26V-R150162 by KEMET Corporation is a single-phase EMI filter with a rated voltage of 250 V. It has a min insulation resistance of 100 Mohm and can operate at temperatures ranging from -25 to 120 °C. This filter is commonly used for EMI mains filtering applications.
SS26V-R180123
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Packing Method: TRAY; Maximum Operating Temperature: 120 Cel; Height: 30.5 mm; Length: 26 mm;
SS26V-R200102
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 120 Cel; Packing Method: TRAY; Rated Voltage: 250 V; Height: 30.5 mm;
SS26V-R250061
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Height: 30.5 mm; Dimensions: L26.0XB20.5XH30.5 (mm)/L1.024XB0.807XH1.201 (inch); Rated Voltage: 250 V; Length: 26 mm;
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Rated Voltage: 250 V; Length: 26 mm; Additional Features: INDUCTANCE 88 MILLI HENRY; Height: 30.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Width (mm): 20.5; Height: 30.5 mm; Terminal Finish: NOT SPECIFIED; Rated Voltage: 250 V;
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V; Operating Frequency (Hz): 50Hz;
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Additional Features: INDUCTANCE 25 MILLI HENRY; Mounting Type: THROUGH HOLE MOUNT; No. of Terminals: 4; Operating Frequency (Hz): 50Hz;
SS26V-120169
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 250 V; Operating Frequency (Hz): 50Hz; Additional Features: INDUCTANCE 16.9 MILLI HENRY; Mounting Type: THROUGH HOLE MOUNT;
SS26V-R080470
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Dimensions: L26.0XB20.5XH30.5 (mm)/L1.024XB0.807XH1.201 (inch); Maximum Operating Temperature: 75 Cel; Terminal Finish: NOT SPECIFIED; Minimum Insulation Resistance: 100 Mohm;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Operating Temperature: -25 Cel; No. of Terminals: 4; Dimensions: L26.0XB20.5XH30.5 (mm)/L1.024XB0.807XH1.201 (inch); Additional Features: INDUCTANCE 10.2 MILLI HENRY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved