Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 7448680100 is a SINGLE PHASE EMI FILTER with 250V rating, 9.5A current, and -40 to 60°C operating temperature range. Ideal for IEC-approved applications requiring EMI mains filtering in through-hole mounting setups.
Median Price
$7.930
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Newark
1+ parts
$6.240
100+ parts
$4.200
1k+ parts
$3.720
10k+ parts
-
RS (Exports)
$6.580
$3.854
Farnell
$5.399
$4.646
Element14
$8.139
$7.311
$5.843
Nova Conductors
$5.248
ComSIT Distribution GmbH
Vyrian
Sensible Micro Corp
VNN
Aztec Data Supply Inc.
$0.780
Bastille Electronics
$4.986
$4.736
$4.671
Corohmni
$5.470
Semicontronic
$6.480
$6.318
$6.286
Continental Prestige Electronics
$6.660
$4.480
Ampacity Inc.
$14.100
Argo Parts USA
GreenTree Electronics
Having IEC approval ensures that the product meets international standards for safety and reliability.
The high rated voltage of 250V allows this EMI mains filter to be used in a variety of applications without risk of electrical damage.
Being a single phase EMI filter, it effectively reduces electromagnetic interference and noise in electrical circuits, ensuring smooth operation.
With a maximum operating temperature of 60°C, this EMI mains filter can withstand high temperatures without compromising performance.
The low minimum operating temperature of -40°C allows this filter to function optimally even in cold environments.
The compact width of 25mm makes this EMI filter easy to install in tight spaces or on densely populated circuit boards.
Operating at a standard frequency of 50Hz, this filter is compatible with most electrical systems and equipment.
The length of 27.5mm provides a balance between compact size and sufficient filtering capabilities for effective noise suppression.
The tray packing method ensures convenient storage, handling, and delivery of the EMI mains filter, reducing the risk of damage during transportation.
The through hole mounting type simplifies the installation process and provides a secure connection to the circuit board, enhancing overall reliability.
With a high rated current of 9.5A, this EMI filter can handle heavy loads and prevent electrical disruptions in power-sensitive applications.
The low height of 9.7mm allows this EMI mains filter to be integrated into space-restricted devices or systems without compromising functionality.
EMI Mains Filters 7448680100 attributes and parameters. Explore more EMI Mains Filters devices from Wurth Elektronik
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
EU2B-YS3203C
Idec
ROTARY SWITCH;
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
B340A-13-F
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
Lite-on Semiconductor
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Nexperia
SSHB21H-R25056
KEMET Corporation
KEMET SSHB21H-R25056 is a UL approved EMI mains filter with 250V rating and 2.5A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 130°C, and withstands up to 500V high pot test. Ideal for single-phase EMI filtering applications due to its compact size (23mm x 26mm x 15.5mm) and through-hole mounting design.
FN3288HV-80-34-C36-R65
Schaffner Holding Ag
Schaffner's FN3288HV-80-34-C36-R65 is a 3-phase EMI filter with 305V rated voltage, 34A current, and 2650V high pot. It operates b/w -40°C to 100°C, has approvals from IEC and UL, and offers max leakage current of 12.4mA. Ideal for panel mounting applications requiring efficient mains filtering at a frequency of 60Hz.
SC-02-20G
The KEMET SC-02-20G is a UL-approved EMI mains filter with 100 Mohm min insulation resistance and 250V rated voltage. It operates b/w -25°C to 105°C, has dimensions of L17.5xB14.0xH17.5 mm, and a rated current of 2A. Ideal for single-phase EMI filtering applications requiring through-hole mounting in various electronic devices.
CMS3-2-R
Eaton Corporation
Eaton Corporation's CMS3-2-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.1A. Ideal for surface mount applications due to its compact size of L11.43xB11.43xH6.0mm, it features Tin/Silver/Copper terminal finish in tape and reel packaging.
SS11VL-R07190
SS11VL-R07190 by KEMET Corporation is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.7A rated current. With a compact size of L22.0xB14.5xH19.5 (mm), it's ideal for EMI mains filtering applications in various electronic devices, offering high insulation resistance of 100 Mohm at temperatures ranging from -25 to 75 °C.
SSHB21H-R30050
KEMET Corporation's SSHB21H-R30050 is a UL approved EMI mains filter with 250V rated voltage and 3A current. Featuring single-phase filter type, it operates b/w -25°C to 130°C temperatures. Ideal for applications requiring high insulation resistance and through-hole mounting in compact spaces.
FN2090-16-06
The Schaffner Holding Ag FN2090-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 17.9A. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and is panel mountable. Ideal for applications requiring effective EMI filtering in electrical systems.
RN102-1-02-3M0
RN102-1-02-3M0 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 1A rated current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of L14.0xB14.0xH9.0 mm, it is designed for through-hole mounting in various electronic systems.
SSHB21HS-18046
KEMET Corporation's SSHB21HS-18046 is a UL approved EMI mains filter with 250V rated voltage and 1.8A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 130°C, and has a compact size of 23mm x 26mm x 15.5mm. Ideal for applications requiring single-phase EMI filtering in various electronic devices.
SCT19XV-190-1R5A005JH
KEMET's SCT19XV-190-1R5A005JH is a 1000V rated SINGLE PHASE EMI Filter with 19A current capacity. It offers high insulation resistance of 100 Mohm and operates b/w -40°C to 150°C. Ideal for EMI mains filtering applications due to its through-hole mounting design and compact dimensions (27mm x 28mm x 18.9mm).
20EQ1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: .02 MHz; Rated Current: 20 A; Height: 57.9 mm; Insertion Loss At Maximum Frequency: 10 dB; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL;
CMS2-5-R
The Eaton Corporation's CMS2-5-R is a UL-approved single-phase EMI mains filter with 4 terminals. It has a rated current of 2.3A and operates b/w -40°C to 160°C. Ideal for surface mount applications, it measures L8.89xB8.89xH6.0 mm and comes in tape and reel packaging.
CMS2-2-R
Eaton Corporation's CMS2-2-R EMI Mains Filter is UL approved with 4 terminals, rated at 4.4A. It operates b/w -40°C to 160°C, ideal for single-phase applications requiring surface mount installation in compact spaces. Dimensions: L8.89xB8.89xH6.0 mm, it features tin terminal finish and comes in tape and reel packaging.
SC-03-06G
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Insulation Resistance: 100 Mohm; High Pot: 500 V; Width (mm): 14; Length: 17.5 mm;
SS26V-070510
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 51 MILLI HENRY; Terminal Finish: NOT SPECIFIED;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 105 Cel; Diameter (mm): 17.5; Dimensions: D17.5XH14.0 (mm)/D0.689XH0.551 (inch); Height: 14 mm;
RTEN-2020
RTEN-2020 by TDK is a THREE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It offers approvals from UL, EN, and ENEC-14 for various applications. With a wide operating temperature range (-25 to 85 °C) and compact dimensions (140x70x42 mm), it is ideal for panel mount installations in industrial settings.
7448051012
Wuerth Elektronik & Kg
Wurth Elektronik 7448051012 is a single-phase EMI filter with 250V rated voltage and 10A current. It has approvals from ENEC-10 and VDE, operating temperature range of -40 to 125°C, and dimensions of 23mm width, 34mm length, and 33mm height. Ideal for applications requiring EMI mains filtering in electronics.
SCF25XV-170-1R7A009JV
SINGLE PHASE EMI FILTER;
B84112G0000B116
TDK's B84112G0000B116 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 16A rated current. With dimensions of L63.0xB52.0xH29.0mm, it offers high pot of 2700V and max leakage current of 0.5mA. Ideal for panel mount applications in various electronic devices operating at 50/60Hz frequencies.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74482210002
Wurth Elektronik
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Additional Features: INDUCTANCE 0.175 MILLI HENRY; Dimensions: L18.5XB14.5XH22.0 (mm)/L0.728XB0.571XH0.866 (inch); Height: 22 mm; Mounting Type: THROUGH HOLE MOUNT;
7448031501
SINGLE PHASE EMI FILTER; Rated Current: 15 A; Approvals (V): ENEC-10; VDE; Operating Frequency (Hz): 50Hz; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT;
744844221
Wurth Elektronik 744844221 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 12A current. It operates b/w -40°C to 125°C, ideal for EMI mains filtering applications. Compact at L28.0xB18.5xH33.0 (mm), it offers through-hole mounting for easy installation in various systems.
7448051804
Wurth Elektronik 7448051804 is a single-phase EMI filter with a rated voltage of 250V and current of 18A. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring effective mains filtering in compact spaces.
7448227005
Wurth Elektronik 7448227005 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications due to its compact L18.5XB14.5XH22.0 mm size and through-hole mounting type.
7448031002
Wurth Elektronik 7448031002 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 10A current. It operates b/w -40°C to 125°C, ideal for ENEC-10; VDE approved applications requiring EMI mains filtering.
7448030509
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Dimensions: L22.0XB13.5XH25.0 (mm)/L0.866XB0.531XH0.984 (inch); Maximum Operating Temperature: 125 Cel; Height: 25 mm; Rated Voltage: 250 V;
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 33 mm; Rated Voltage: 250 V; Packing Method: CARTON; Width (mm): 23;
7448063801
Wuerth Elektronik & Kg 7448063801 is a single-phase EMI mains filter with 250V rated voltage and 38A rated current. It has approvals from ENEC-10 and VDE, operates b/w -40°C to 125°C, and is suitable for applications requiring effective electromagnetic interference suppression in through-hole mounting setups.
744839010400
THREE PHASE EMI FILTER; Rated Current: 40 A; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50Hz; Approvals (V): IEC; Packing Method: TRAY;
744834433
Wurth Elektronik 744834433 is a single-phase EMI mains filter with 4 terminals, rated voltage of 250V, and operating temperature range from -40°C to 125°C. It has a width of 28.0mm, length of 32.5mm, and height of 22mm. Ideal for applications requiring noise suppression in electrical systems at frequencies up to 50Hz with a rated current of 5A.
7448680120
SINGLE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50Hz; Mounting Type: THROUGH HOLE MOUNT; Length: 27.5 mm; Rated Voltage: 250 V;
7448040707
SINGLE PHASE EMI FILTER; Rated Current: 7 A; Height: 28 mm; Maximum Operating Temperature: 125 Cel; Dimensions: L28.0XB19.0XH28.0 (mm)/L1.102XB0.748XH1.102 (inch); Terminal Finish: TIN COPPER;
7448040435
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e2; Approvals (V): ENEC-10; VDE; Terminal Finish: TIN COPPER;
744841414
Wurth Elektronik's 744841414 is a single-phase EMI mains filter with a rated voltage of 250V and max operating temperature of 125°C. It has approvals from ENEC-10, IEC, VDE and dimensions of L16.0xB7.5xH17.5 (mm). Ideal for applications requiring effective EMI filtering in electronic systems with a rated current of 4A.
7448014501
SINGLE PHASE EMI FILTER; Rated Current: 4.5 A; Mounting Type: THROUGH HOLE MOUNT; Length: 15 mm; Height: 16 mm; Maximum Operating Temperature: 125 Cel;
7448030417
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Width (mm): 13.5; Minimum Operating Temperature: -40 Cel; Approvals (V): ENEC-10; VDE; Operating Frequency (Hz): 50Hz;
744834407
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Length: 32.5 mm; Terminal Finish: Tin (Sn) over Copper (Cu); Width (mm): 28.0; Rated Voltage: 250 V;
744844471
SINGLE PHASE EMI FILTER; Rated Current: 9 A; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -40 Cel;
7448041104
SINGLE PHASE EMI FILTER; Rated Current: 11 A; Length: 28 mm; JESD-609 Code: e2; Terminal Finish: TIN COPPER; Approvals (V): ENEC-10; VDE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved