Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Maximum RF Input Frequency: 2000 MHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Contempo Components LLC
1+ parts
100+ parts
1k+ parts
10k+ parts
Component Stockers USA
$99.990
Authorized Procurement Solutions
Perfect Parts
Kepictronics
GreenTree Electronics
RF/Microwave Up/Down Converters UPC2757TB-E3-A attributes and parameters. Explore more RF/Microwave Up/Down Converters devices from Renesas Electronics
Characteristic Impedance:
Construction:
Minimum Down Conversion Gain:
Maximum Intermediate Frequency (IF):
Minimum Intermediate Frequency (IF):
LO Tunable:
Mounting Feature:
Maximum Noise Figure:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Equivalence Code:
Power Supplies (V):
Maximum RF Input Frequency:
Minimum RF Input Frequency:
RF or Microwave Device Type:
Maximum Supply Current:
UPC2757TB-E3-A RF & Microwave trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1552200253
Molex
WIRE AND CABLE;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
Eic Semiconductor
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Transys Electronics
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
Goodwork Semiconductor
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Formosa Microsemi
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
PMB2333
Infineon Technologies
UP/DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;
TRF1121
Texas Instruments
TRF1121 by Texas Instruments is an RF up converter with a frequency range of 1500-2100 MHz. It offers LO tunability, 270-400 MHz IF, and 0 dBm max output power. Ideal for applications requiring high-frequency conversion in temperatures ranging from -40 to 85°C.
UPB1005GS-E1
Renesas Electronics
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 30; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SSOP30,.3;
TRF1216IRGPTG3
TRF1216IRGPTG3 by Texas Instruments is a RF/Microwave DOWN CONVERTER with 27 dB Min. Down Conversion Gain, 5V Power Supply, and -40 to 85°C Operating Temp. Ideal for applications requiring a LO Tunable device with RF Input Frequency range of 3300-3800 MHz and IF range of 400-500 MHz.
TRF1222IRTMT
TRF1222IRTMT by Texas Instruments is a RF up converter with 3300-3800 MHz output frequency range, 22 dB min gain, and 5V power supply. Ideal for applications requiring high-frequency conversion in RF/microwave systems.
HMC7056A
Analog Devices
Analog Devices' HMC7056A is a RF/Microwave UP CONVERTER module with freq range of 29-31 GHz, VSWR of 1.5, and gain of 64 dB. Ideal for applications requiring high frequency conversion such as radar systems and satellite communications due to its wide operating temperature range (-20 to 80 °C) and compact PANEL MOUNT design.
ADMV1018
UP/DOWN CONVERTER;
MAX2663EUT-T
Maxim Integrated
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Noise Figure: 12.7 dB;
TDA8060TS
DOWN CONVERTER; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Minimum Operating Temperature: -20 Cel; Maximum Noise Figure: 16 dB;
TA1296FN
Toshiba
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 30; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Characteristic Impedance: 75 ohm;
ADMV1017
MAX2673EUA
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Voltage Standing Wave Ratio: 2.2;
MAX9993ETP+D
DOWN CONVERTER; Maximum RF Input Frequency: 2200 MHz; Minimum Input Power (CW): 22 dBm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Intermediate Frequency (IF): 350 MHz;
MAX2681EUT+
MAX2681EUT+ by Analog Devices is an RF down converter with 1.5 VSWR, 6.7 dB gain, and LO tunability. It operates from -40 to 85 °C, supports RF input frequencies from 400 MHz to 2500 MHz, and has a min IF of 10 MHz. Ideal for RF/Microwave applications requiring high performance in compact designs.
PMB2332
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Intermediate Frequency (IF): 3000 MHz;
MAX9993ETP+T
MAX9993ETP+T by Analog Devices is an RF down converter with LO tunable feature. It operates b/w -40 to 85 °C, supporting RF input frequencies from 1700 to 2200 MHz. With a VSWR of 1.5 and IF range of 50-350 MHz, it's ideal for RF/Microwave applications.
MAX2671
Analog Devices' MAX2671 is an RF up converter with 40-2500 MHz output frequency range, 11 dB gain, and 8 dB noise figure. Ideal for applications requiring up conversion from 10 MHz IF to 500 MHz IF, it features tunable LO and TIN LEAD finish.
MAX2118UTL-T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 40; Package Body Material: PLASTIC/EPOXY; LO Tunable: YES; Minimum Operating Temperature: 0 Cel;
MAX2116UTL+
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 40; Package Body Material: PLASTIC/EPOXY; LO Tunable: YES; Construction: COMPONENT;
MAX2106CCM
DOWN CONVERTER; Minimum Operating Temperature: 0 Cel; Construction: COMPONENT; Maximum RF Input Frequency: 2175 MHz; Characteristic Impedance: 50 ohm; LO Tunable: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UPC2758TB-E3-A
California Eastern Laboratories
DOWN CONVERTER; Minimum Intermediate Frequency (IF): 20 MHz; Maximum Noise Figure: 15 dB; Maximum Intermediate Frequency (IF): 300 MHz; Minimum Down Conversion Gain: 14 dB; LO Tunable: YES;
UPC2758TB-E3-A by Renesas Electronics is a RF/Microwave Up/Down Converter with 6 terminals and a max supply current of 14.8 mA. It operates in temperatures ranging from -40 to 85 °C and is suitable for surface mount applications.
UPC2756TB
DOWN CONVERTER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum RF Input Frequency: 100 MHz; LO Tunable: YES; Minimum Intermediate Frequency (IF): 10 MHz; Minimum Down Conversion Gain: 11 dB;
UPC2721GV-E1
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Terminal Finish: Tin/Lead (Sn/Pb);
UPC2731GS
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -20 Cel;
UPC2753GR
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 8.5 mA;
UPC2722GR-E3
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel;
UPC2756TB-A
DOWN CONVERTER; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Maximum RF Input Frequency: 2000 MHz; Maximum Noise Figure: 16 dB; Maximum Intermediate Frequency (IF): 300 MHz;
UPC2721GR-E2
UPC2734GR
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; JESD-609 Code: e0;
UPC2721GV-E1-A
DOWN CONVERTER; Minimum RF Input Frequency: 900 MHz; Maximum RF Input Frequency: 2000 MHz; Minimum Down Conversion Gain: 18 dB; Maximum Noise Figure: 15 dB; JESD-609 Code: e6;
UPC2743GS
UPC2744GS-E1
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 59 mA;
UPC2722GR-E2
UPC2756T
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel;
UPC2721GV-A
DOWN CONVERTER; Minimum Down Conversion Gain: 18 dB; Maximum Operating Temperature: 85 Cel; Minimum RF Input Frequency: 900 MHz; Characteristic Impedance: 50 ohm; Minimum Intermediate Frequency (IF): 50 MHz;
UPC2743GS-E1
UPC2722GV-E1
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 5;
UPC2721GR-E1
UPC2721GR-E3
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved