Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DISPLAY CONTROLLER, PALETTE DAC; Terminal Form: J BEND; No. of Terminals: 68; Package Code: QCCJ; Package Shape: SQUARE; Package Style (Meter): CHIP CARRIER;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Prism Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Corohmni
$26.830
Perfect Parts
Display Controllers ICS5342 attributes and parameters. Explore more Display Controllers devices from Renesas Electronics
Address Bus Width:
External Data Bus Width:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
ICS5342 Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
1552200168
Molex
WIRE AND CABLE;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Bkc Semiconductors
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Electronic Devices
New England Semiconductor
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
Promax-johnton
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TVP3033-175PPA
TVP3033-175PPA by Texas Instruments is a display controller with 1600x1280 pixels. It operates at 3.1-3.5V, -40 to 70°C, and has an address bus width of 4. Ideal for commercial applications requiring a CMOS technology-based peripheral IC with palette DAC functionality.
S1D13700F02A100
Seiko Epson
Seiko Epson's S1D13700F02A100 is a display controller with 320x240 pixels, 16-bit address bus, and 8-bit external data bus. Ideal for industrial applications, it operates b/w -40 to 85°C with a max clock frequency of 10 MHz. The package style includes flatpack, thin profile, and fine pitch features for versatile integration.
XDLP2021AFQUQ1
Texas Instruments XDLP2021AFQUQ1 is a display controller with 832x468 pixels, 80 MHz clock frequency, and SPI bus compatibility. It operates b/w -40 to 105 °C and has a supply voltage range of 1.7V to 1.95V. Ideal for automotive applications meeting AEC-Q100 standards.
UPD6462GS-001-A
Renesas Electronics
GRAPHICS PROCESSOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
PCA85232U/2DA/Q1,0
DISPLAY CONTROLLER, DOT MATRIX LCD DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Technology: CMOS; Peak Reflow Temperature (C): NOT SPECIFIED;
PCF8548U/9
DISPLAY CONTROLLER, DOT MATRIX LCD DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 233; Package Code: DIE; Package Shape: RECTANGULAR;
M35062-001SP
DISPLAY CONTROLLER, CRT CHARACTER DISPLAY; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 32; Package Code: SDIP; Package Shape: RECTANGULAR;
ADV478KP80
Analog Devices
ADV478KP80 by Analog Devices is a Display Controller with 8-bit External Data Bus, 3-bit Address Bus, and 80 MHz Clock Frequency. It is used in commercial applications for driving displays and palette DACs, featuring a max supply voltage of 5.25 V and operating temperature range of 0 to 70°C.
PCF2113EU/2/F4
DISPLAY CONTROLLER, DOT MATRIX LCD DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 112; Package Code: DIE; Package Shape: RECTANGULAR;
HCD66710A00
DISPLAY CONTROLLER, DOT MATRIX LCD DRIVER; Terminal Form: NO LEAD; No. of Terminals: 100; Package Shape: UNSPECIFIED; Surface Mount: YES; Qualification: Not Qualified;
TVP3010-110CGA
TVP3010-110CGA by Texas Instruments is a display controller with 1600x1280 pixels, 8-bit data bus, and 110 MHz clock frequency. It is used in commercial applications for driving high-resolution displays efficiently. The package style is grid array with 84 terminals and operates b/w 0 to 70°C temperature range.
TVP3030-220PPA
TVP3030-220PPA by Texas Instruments is a display controller with 1600x1280 pixels, 140 MHz clock frequency, and 8-bit external data bus width. It is used in commercial applications for driving high-resolution displays efficiently. The package style includes flatpack and heat sink/slug options, making it versatile for various design requirements.
ADV476KP35
ADV476KP35 by Analog Devices is a Display Controller with 8-bit External Data Bus, 35 MHz Clock Frequency, and 5.5 V Max Supply Voltage. It is used in commercial applications for driving displays and palette DACs with a CMOS technology design.
TVP3026-250BMDN
TVP3026-250BMDN by Texas Instruments is a Display Controller with 1280x1024 resolution, 8-bit data bus, and 14.31818 MHz clock frequency. Ideal for commercial applications requiring high-quality display control in a compact square flatpack package.
IMSG335X-85S
STMicroelectronics
IMSG335X-85S by STMicroelectronics is a Display Controller with 1280x1024 pixels. It operates in industrial temperature range (-40 to 85 °C) and supports a 24-bit external data bus width. The package style is flatpack, with a max supply voltage of 5.25V, making it suitable for CRT graphics display applications.
TLC34075-85AFN
TLC34075-85AFN by Texas Instruments is a display controller with 1024x768 pixels. It operates b/w 0 to 70°C, with supply voltage range of 4.75V to 5.25V. Suitable for commercial applications, it features a quad terminal position and CMOS technology in a chip carrier package style.
5962-9675901QYA
The Texas Instruments 5962-9675901QYA is a display controller with an address bus width of 3, external data bus width of 8, and max clock frequency of 135 MHz. It is used in military-grade applications requiring a CMOS technology-based palette DAC for high-resolution displays up to 1600 x 1280 pixels.
TLC34075-135AFNR
TLC34075-135AFNR by Texas Instruments is a display controller with 1024x768 pixels. It operates b/w 0 to 70°C, with supply voltage range of 4.75V to 5.25V. This chip carrier package has 84 terminals and is suitable for commercial applications requiring palette DAC technology.
HCD66717A03
DISPLAY CONTROLLER, DOT MATRIX LCD DRIVER; Terminal Form: NO LEAD; No. of Terminals: 164; Package Shape: UNSPECIFIED; Surface Mount: YES; JESD-30 Code: X-XUUC-N164;
TVP3026-175BPCE
TVP3026-175BPCE by Texas Instruments is a display controller with 1280x1024 pixel config, 8-bit external data bus width, and 14.31818 MHz clock frequency. It is used in commercial applications for driving displays with a resolution of up to 1280x1024 pixels.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ICS5301V-1
DISPLAY CONTROLLER, PALETTE DAC; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
ICS5301V-1-LF
ICS5301V-3
ICS5301V-3-LF
ICS5342LF
DISPLAY CONTROLLER, PALETTE DAC; Terminal Form: J BEND; No. of Terminals: 68; Package Code: QCCJ; Package Shape: SQUARE; Address Bus Width: 3;
ICS5342V
DISPLAY CONTROLLER, PALETTE DAC; Terminal Form: J BEND; No. of Terminals: 68; Package Code: QCCJ; Package Shape: SQUARE; Package Body Material: PLASTIC/EPOXY;
ICS5342VLF
DISPLAY CONTROLLER, PALETTE DAC; Terminal Form: J BEND; No. of Terminals: 68; Package Code: QCCJ; Package Shape: SQUARE; Width: 24.23 mm;
ICS5300-1V44
Integrated Circuit Systems
DISPLAY CONTROLLER, PALETTE DAC; Terminal Form: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE; Qualification: Not Qualified;
ICS5342
ICS5341V-2-LF
DISPLAY CONTROLLER, PALETTE DAC; Terminal Form: J BEND; No. of Terminals: 68; Package Code: QCCJ; Package Shape: SQUARE; Qualification: Not Qualified;
ICS5340V-3-LF
DISPLAY CONTROLLER, PALETTE DAC; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 68; Package Code: QCCJ; Package Shape: SQUARE;
ICS5300V-1-LF
ICS5301V-2-LF
ICS5300-3V44
Integrated Device Technology
DISPLAY CONTROLLER, PALETTE DAC; Terminal Form: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE; External Data Bus Width: 8;
ICS5300V-1
ICS5340V-2-LF
ICS5341V-3
DISPLAY CONTROLLER, PALETTE DAC; Terminal Form: J BEND; No. of Terminals: 68; Package Code: QCCJ; Package Shape: SQUARE; Terminal Position: QUAD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved