Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC; Surface Mount: NO; Maximum Holding Current: 15 mA; Terminal Finish: Tin/Lead (Sn/Pb); Maximum DC Gate Trigger Current: 35 mA; Maximum Leakage Current: .5 mA;
Median Price
-
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Vyrian
ACDS - Activité Composants Distribution Service
Halfin
Holdelec - ElecDif-Pro
Tech-Mark Corp
ABC Electronics Ltd.
Nova Conductors
PUI
GES GmbH
ECAB
Manotoh
Fibra_Brandt Electronic GMBH
LittleDiode
Goldney Electronics S.L.
Huijzer Components
Corohmni
$4.196
Aztec Data Supply Inc.
$4.640
AZTECH Wire
$15.347
One Stop Electronics
$29.100
Alle Elektronik GmbH
Glotronic Ltd.
Continental Prestige Electronics
Corphita
UNI Independent Distributors
Assy Fe
Argo Parts USA
Bastille Electronics
Triode For Alternating Current (TRIAC) BT136-500 attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Philips Semiconductors
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JESD-609 Code:
Maximum Leakage Current:
Maximum On-state Voltage:
Maximum Operating Temperature:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Trigger Device Type:
BT136-500 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
In September 2006, Philips completed the sale of an 80.1% stake in Philips Semiconductors to a consortium of private equity investors consisting of KKR, Bain Capital, Silver Lake Partners, Apax Partners and AlpInvest Partners. The new company name NXP (from Next eXPerience) was announced on August 31, 2006, and the company was officially launched during the Internationale Funkausstellung (IFA) consumer electronics show in Berlin. The newly independent NXP was ranked as one of the world's top 10 semiconductor companies
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
Weitron Technology
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
CRCW080510R0FKEA
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
Allegro MicroSystems
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
2N6073BG
Littelfuse
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
TIC253N
TIC253N by Texas Instruments is a TRIAC with 20A RMS current, 800V repetitive peak off-state voltage, and 2.5V max DC gate trigger voltage. It operates b/w -40°C to 125°C and is ideal for AC power control applications requiring precise switching capabilities.
DTB8G
The Onsemi DTB8G is a TRIAC with 600V repetitive peak off-state voltage, 8A max RMS on-state current, and 125 °C operating temp. Ideal for AC power control applications requiring a trigger device with 2V max DC gate trigger voltage and 50mA max DC gate trigger current.
TIC225B
TIC225B by Texas Instruments is a TRIAC with 15mA DC Gate Trigger Current, 2mA Leakage Current, and 8A RMS On-state Current. It operates b/w -40 to 110°C and has a max Off-state Voltage of 200V. Ideal for AC power control applications due to its high current handling capacity and precise triggering capabilities.
MAC08BT1
MAC08BT1 by Onsemi is a single TRIAC with 4 terminals, capable of handling up to 0.8A RMS on-state current. It has a max DC gate trigger voltage of 2V and can operate in temperatures ranging from -40 °C to 110°C. Ideal for applications requiring precise AC switching control.
2N6071AG
BTA16-800SW3G
Z0103MN,135
Ween Semiconductors
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BT137-600E,127
NXP Semiconductors
BT137-600E,127 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 8A max RMS on-state current. It has a 10mA max DC gate trigger current and operates at temperatures up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
DTA2E
DTA2E by Onsemi is a TRIAC with 2A RMS on-state current, 400V repetitive peak off-state voltage, and 15mA max DC gate trigger current. It operates b/w -40 °C to 110°C, making it suitable for AC power control applications like dimmers and motor speed controllers.
CLA80MT1200NHB
TRIAC;
DTA16G
DTA16G by Onsemi is a TRIAC with 1.4V max on-state voltage, 50mA max DC gate trigger current, and 2mA max leakage current. It operates at up to 125 °C and has a max RMS on-state current of 16A. Ideal for applications requiring precise AC power control in various electronic devices.
BTA12-800BWRG
STMicroelectronics
BTA12-800BWRG by STMicroelectronics is a single TRIAC with 800V repetitive peak off-state voltage, 12A max RMS on-state current, and 1.3V max DC gate trigger voltage. It is used in snubberless TRIAC applications for AC power control due to its isolated case connection and -40°C to 125°C operating temperature range.
BT136S-600F,118
BT136S-600F,118 by NXP Semiconductors is a TRIAC with a max RMS On-state Current of 4A and a Repetitive Peak Off-state Voltage of 600V. It is used in applications requiring 4-quadrant logic level triggering and can handle high operating temperatures up to 125°C.
BTA40-600B
BTA40-600B by STMicroelectronics is a TRIAC with a max RMS on-state current of 40A and a repetitive peak off-state voltage of 600V. It is commonly used in applications requiring 4 quadrant logic level triggering, such as motor control and lighting systems.
TIC216B
TIC216B by Texas Instruments is a single TRIAC with 3 terminals, max. DC gate trigger current of 5 mA, and max. RMS on-state current of 6 A. It operates b/w -40 to 110°C, suitable for applications requiring a 4-quadrant logic level TRIAC like AC power control in various electronic devices.
SM10LZ47
Toshiba
The Toshiba SM10LZ47 is a TRIAC with max. on-state current of 10A, trigger voltage of 1.5V, and off-state voltage of 800V. Ideal for AC applications requiring up to 110A peak current handling in temperatures ranging from -40°C to 125°C. Package style: FLANGE MOUNT, terminals: THROUGH-HOLE, isolated case connection.
MAC15A8FP
MAC15A8FP by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 15A max RMS on-state current, and 50mA max DC gate trigger current. It is used in applications requiring reliable AC switching such as dimmers, motor speed control, and heating control systems.
DTA10F
DTA10F by Onsemi is a TRIAC with 1.4V max on-state voltage, 30mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 150°C, suitable for applications requiring up to 10A RMS on-state current and 500V repetitive peak off-state voltage.
TIC215A
TIC215A by Texas Instruments is a single TRIAC with 3 terminals, featuring a max RMS on-state current of 3A and a repetitive peak off-state voltage of 100V. It operates b/w -40 to 110°C, ideal for applications requiring a 4 quadrant logic level TRIAC trigger device.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BT136S-600D,118
BT136S-600D,118 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It has a 1.5V max DC gate trigger voltage and operates b/w -40 to 125 °C. Ideal for AC power control applications due to its GULL WING terminal form and small outline package style.
BT136S-600D,118 by Ween Semiconductors is a TRAIC with a maximum operating temperature of 125°C and a repetitive peak off-state voltage of 600V. It has a maximum RMS on-state current of 4A and features a sensitive gate. This device is commonly used in 4 quadrant logic level TRIAC applications.
BT139-600E,127
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BT136-600E,127
BT139-600E/DG,127
NXP Semiconductors' BT139-600E/DG,127 is a TRIAC with 16A RMS on-state current, 600V repetitive peak off-state voltage, and 10mA max DC gate trigger current. It operates b/w -40°C to 150°C and finds applications in AC power control circuits for various electronic devices.
TRIAC; Surface Mount: NO; Maximum Holding Current: 45 mA; Maximum RMS On-state Current: 16 A; JESD-609 Code: e3; Maximum Leakage Current: .5 mA;
BT134-600D,127
BT134-600D,127 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It has a 1.5V max DC gate trigger voltage and operates at up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BT139B-600,118
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BT139B-600,118 by NXP Semiconductors is a single TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. Ideal for applications requiring 4-quadrant logic level TRIACs, it operates b/w -40 to 125°C with a max DC gate trigger voltage of 1.5V.
BT137S-600E,118
BT137S-600E,118 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 8A max RMS on-state current. It has a 10mA max DC gate trigger current and operates b/w -40 to 125 °C. Ideal for applications requiring precise AC power control in various electronic devices.
BT139B-600E,118
BT139B-600E,118 by NXP Semiconductors is a TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It has a max DC gate trigger current of 10mA and operates b/w -40 to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
BT136-800E,127
BT136-800E,127 by NXP Semiconductors is a TRIAC with 800V repetitive peak off-state voltage and 4A max RMS on-state current. It has a trigger device type of 4 quadrant logic level TRIAC and can operate at temperatures up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved