Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BT136-800E,127 by NXP Semiconductors is a TRIAC with 800V repetitive peak off-state voltage and 4A max RMS on-state current. It has a trigger device type of 4 quadrant logic level TRIAC and can operate at temperatures up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
Median Price
$0.472
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Newark
1+ parts
$0.340
100+ parts
-
1k+ parts
10k+ parts
Farnell
$0.605
$0.318
$0.205
$0.190
Mouser Electronics
$1.070
$0.435
$0.356
$0.251
Element14
$1.560
$0.631
$0.426
$0.329
Arrow
$0.224
Avnet
Verical
$0.302
Chip1Stop
Digiode
$0.408
Vyrian
Anansix
NAC Semi
$0.753
VNN
Nova Conductors
Semicontronic
$0.185
$0.184
Ampacity Inc.
Continental Prestige Electronics
$0.275
$0.252
$0.173
Corphita
$0.386
Component Stockers USA
$0.390
$0.280
$0.250
Aztec Data Supply Inc.
$2.955
Corohmni
$4.724
Perfect Parts
Infinite Electronics LLP (Excess)
Glotronic Ltd.
Argo Parts USA
Eastek
$0.244
GreenTree Electronics
Bastille Electronics
UNI Independent Distributors
The use of plastic/epoxy material makes this product lightweight and durable, ideal for various applications.
This high gate trigger current allows for reliable and consistent performance in triggering the triac.
Single configuration simplifies the installation and usage of the triac, making it user-friendly.
Rectangular package shape ensures easy integration and space-saving design in electronic circuits.
Through-hole terminal form provides secure connections and ease of soldering during assembly.
Low leakage current ensures minimal power loss and high efficiency in the triac operation.
The low off-state leakage current enhances the safety and reliability of the triac in various applications.
Three terminals offer flexibility in circuit design and connection options for the triac.
Flange mount package style allows for easy mounting and secure installation of the triac in electronic equipment.
With a high operating temperature, this triac can withstand harsh environmental conditions and extended operation.
The 4-quadrant logic level trigger device type provides precise control and versatility in triggering the triac.
TIN terminal finish ensures good conductivity and corrosion resistance for reliable performance.
Single terminal position simplifies the connection and installation process of the triac.
High RMS on-state current rating allows for handling higher loads and power requirements in the circuit.
Low gate trigger voltage ensures efficient triggering and reliable operation of the triac.
Main terminal 2 connection provides a secure and stable connection point for external circuits.
High off-state voltage rating allows for safe and reliable operation in high voltage applications.
The minimum rate of rise of off-state voltage ensures quick response and protection against voltage spikes.
High holding current rating provides stability and ensures that the triac remains in the on-state during operation.
Triode For Alternating Current (TRIAC) BT136-800E,127 attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from NXP Semiconductors
Additional Features:
Case Connection:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum RMS On-state Current:
Maximum Repetitive Peak Off-state Leakage Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
BT136-800E,127 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
EU2B-YS3303C
Idec
ROTARY SWITCH;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Central Semiconductor
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
TG35C60
Hbcontrols
TG35C60 by Hbcontrols is a TRIAC with 35A RMS current and 600V repetitive peak off-state voltage. It has a plastic/epoxy body, single configuration, and solder lug terminals. Ideal for applications requiring AC power control in devices like dimmers, motor speed controllers, and heating equipment.
NYT6-5D6DT4G
NYT6-5D6DT4G by Onsemi is a TRIAC with 10mA DC Gate Trigger Current, 6A RMS On-state Current, and 600V Repetitive Peak Off-state Voltage. It operates b/w -40 °C to 110°C, making it suitable for various AC power control applications requiring precise switching capabilities in a compact surface-mount package.
MAC218A6FP
MAC218A6FP by Onsemi is a single TRIAC with 8A max RMS on-state current, 400V repetitive peak off-state voltage, and 50mA max DC gate trigger current. It is used in applications requiring isolated case connection, such as motor control systems and lighting dimmers.
BT139-600E/DG,127
Ween Semiconductors
TRIAC; Surface Mount: NO; Maximum Holding Current: 45 mA; Maximum RMS On-state Current: 16 A; JESD-609 Code: e3; Maximum Leakage Current: .5 mA;
MAC228A8TG
MAC228A8TG by Onsemi is a TRIAC with 600V repetitive peak off-state voltage and 8A max RMS on-state current. It operates b/w -40 to 110 °C, with a max DC gate trigger current of 5mA. Ideal for applications requiring precise AC power control in various electronic devices.
BTA40-600B
Continental Device India
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
MAC997A6RLRPG
MAC997A6RLRPG by Onsemi is a single TRIAC with 3 terminals. It has a max RMS on-state current of 0.8A and can handle a repetitive peak off-state voltage of 400V. Ideal for applications requiring precise AC power control in various electronic devices.
Q6015R5TP
Littelfuse
The Littelfuse Q6015R5TP is a TRIAC with 15A RMS on-state current, 600V repetitive peak off-state voltage, and 50mA max DC gate trigger current. Ideal for applications requiring AC switching such as dimmers, motor speed controllers, and heating control systems.
DTM12G
DTM12G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 12A max RMS on-state current, and -40 to 125 °C operating temperature range. Ideal for AC power control applications such as dimmers, motor speed controllers, and heating control systems.
Z0103MNT1G
Z0103MNT1G by Onsemi is a 4-terminal TRIAC with max. DC gate trigger current of 3mA and max. RMS on-state current of 1A. Ideal for applications requiring a 600V repetitive peak off-state voltage, such as AC power control in consumer electronics or industrial equipment.
BTA16-600BW3G
BTA16-600BW3G by Onsemi is a single TRIAC with 16A max RMS on-state current and 600V repetitive peak off-state voltage. It is used in snubberless applications, has a max operating temperature of 125°C, and features a plastic/epoxy package body material.
2N6344G
2N6344G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 8A max RMS on-state current, and 100mA max DC gate trigger current. It is used in applications requiring AC switching such as dimmers, motor speed control, and heating control systems.
MAC8N
MAC8N by Onsemi is a TRIAC with 3 terminals, max. RMS on-state current of 8A, and max. DC gate trigger voltage of 1.5V. It is used in applications requiring AC switching such as dimmers, motor speed control, and heating control systems.
2N5274
2N5274 by Texas Instruments is a TRIAC with max. DC gate trigger current of 150mA, max. leakage current of 1mA, and max. operating temp of 125°C. It is used as a trigger device in applications requiring a max RMS on-state current of 25A and repetitive peak off-state voltage of 400V.
TIC205A
TIC205A by Texas Instruments is a TRIAC with 2A RMS on-state current, 5mA max DC gate trigger current, and 100V repetitive peak off-state voltage. Ideal for AC switching applications in devices like dimmers, motor speed controllers, and heating control systems.
BTA10-600BWRG
BTA10-600BWRG by STMicroelectronics is a single TRIAC with 10A RMS on-state current and 600V repetitive peak off-state voltage. It is used in snubberless applications, has a max operating temperature of 125°C, and UL recognized for reliability.
BTA12-600BW3G
BTA12-600BW3G by Onsemi is a single TRIAC with 12A RMS on-state current and 600V repetitive peak off-state voltage. It is used in snubberless applications, with a max operating temperature of 125°C.
T2500D
T2500D by Onsemi is a single TRIAC with 3 terminals, featuring a max RMS on-state current of 6A and a repetitive peak off-state voltage of 400V. Ideal for applications requiring a trigger device with 4 quadrant logic level and an operating temperature range from -40 to 100°C.
BT137-600,127
NXP Semiconductors
The NXP Semiconductors BT137-600,127 is a TRIAC with 600V repetitive peak off-state voltage and 8A max RMS on-state current. It has a 35mA max DC gate trigger current and operates at up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
DTA8C
DTA8C by Onsemi is a TRIAC with 1.6V max on-state voltage, 50mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -30 °C to 125°C, suitable for AC power control applications like dimmers and motor speed controllers.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BT136S-600D,118
BT136S-600D,118 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It has a 1.5V max DC gate trigger voltage and operates b/w -40 to 125 °C. Ideal for AC power control applications due to its GULL WING terminal form and small outline package style.
BT136S-600D,118 by Ween Semiconductors is a TRAIC with a maximum operating temperature of 125°C and a repetitive peak off-state voltage of 600V. It has a maximum RMS on-state current of 4A and features a sensitive gate. This device is commonly used in 4 quadrant logic level TRIAC applications.
BT139-600E,127
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BT136-600E,127
NXP Semiconductors' BT139-600E/DG,127 is a TRIAC with 16A RMS on-state current, 600V repetitive peak off-state voltage, and 10mA max DC gate trigger current. It operates b/w -40°C to 150°C and finds applications in AC power control circuits for various electronic devices.
BT134-600D,127
BT134-600D,127 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It has a 1.5V max DC gate trigger voltage and operates at up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BT137-600E,127
BT139B-600,118
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BT139B-600,118 by NXP Semiconductors is a single TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. Ideal for applications requiring 4-quadrant logic level TRIACs, it operates b/w -40 to 125°C with a max DC gate trigger voltage of 1.5V.
BT137S-600E,118
BT137S-600E,118 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 8A max RMS on-state current. It has a 10mA max DC gate trigger current and operates b/w -40 to 125 °C. Ideal for applications requiring precise AC power control in various electronic devices.
BT139B-600E,118
BT139B-600E,118 by NXP Semiconductors is a TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It has a max DC gate trigger current of 10mA and operates b/w -40 to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
BT136-800E,127
BT136-600E
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved