Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PJA3405_R1_00001 by Panjit International is a P-CHANNEL power FET with a min DS breakdown voltage of 30V. It is used for switching applications and has a max pulsed drain current of 14.4A. The transistor is surface mountable, has a small outline package style, and uses metal-oxide semiconductor technology.
Median Price
$0.310
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.119
1k+ parts
$0.078
10k+ parts
-
Mouser Electronics
$0.120
$0.074
Chip1Stop
$0.184
$0.097
$0.092
Ozdisan Elektronik
$0.089
Nova Conductors
$0.110
Maritex
$0.227
$0.060
Vyrian
Chip Stock
Netroflash
$0.108
Perfect Parts
GreenTree Electronics
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Authorized Procurement Solutions
Futuretech Components
Provides durability and protection for the internal components of the transistor.
Offers efficient power management and control in electronic circuits.
Simplifies circuit design by integrating a diode for reverse voltage protection.
Designed for high-speed switching applications, ensuring fast performance.
Enables easy and compact PCB assembly.
Provides a high breakdown voltage for reliable operation in various conditions.
Allows for efficient placement on the PCB.
Ensures high power efficiency and performance.
Provides good electrical conductivity and corrosion resistance.
Capable of handling high current loads.
Power Field Effect Transistors (FET) PJA3405_R1_00001 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Panjit International
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
PJA3405_R1_00001 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Additional Assembly Site for SOT-23 12/Jan/2023
PANJIT is a public company founded in May 1986. We are a semi-conductor manufacturer, and have IATF-16949,ESD S20.20,ISO-9001,ISO-14001,ISO-45001 certifications etc.. PANJIT is vertically integrated with IDM design capability, own wafer foundries and state-of-art production lines. With insight observation and core technologies, PANJIT is able to continuously launch low profile products and accurate power rating devices which conforms to the customer needs. PANJIT commits to serve customers with the best service, thus we have established sales offices worldwide. We have sites in North America, Germany, Korea and China which allows us to provide better and prompt service.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Micro Commercial Components
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
American Power Devices
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
NXP Semiconductors
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H/883C
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
CC0603KRX7R9BB103
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
SQM120P10-10M1L_GE3
Vishay Intertechnology
Vishay Intertechnology's SQM120P10-10M1L_GE3 is a P-channel FET with 100V DS breakdown voltage, 480A IDM, and 0.0101 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance.
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
FDMS86300DC
FDMS86300DC by Onsemi is a N-CHANNEL Power FET with 80V DS Breakdown Voltage, ideal for SWITCHING applications. It features 260A IDM Pulsed Drain Current, 0.0031 ohm RDS(ON), and 240mJ EAS Avalanche Energy Rating. With a max power dissipation of 125W and operating temperature up to 150°C, it is suitable for high-power switching circuits in various electronic devices.
IRF3205ZSTRLPBF
IRF3205ZSTRLPBF by Infineon Technologies is a power FET with N-channel polarity. It has a min DS breakdown voltage of 55V and can handle a max pulsed drain current of 440A. This transistor is commonly used for switching applications.
IRLML6401PBF
IRLML6401PBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 33mJ EAS. With ENHANCEMENT MODE operation, it has a -55 to 150 °C temperature range and 0.05 ohm RDS(on). Ideal for compact designs with its SMALL OUTLINE package style.
SQJ459EP-T1_GE3
The Vishay Intertechnology SQJ459EP-T1_GE3 is a P-CHANNEL FET with 60V DS breakdown voltage and 200A IDM. Ideal for power applications, it features a built-in diode, 0.018 ohm RDS(on), and 80mJ EAS rating. Suitable for enhancement mode operation in various electronic systems requiring high current handling capabilities.
BS170
Itt Components
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IRF840SPBF
Vishay Intertechnology's IRF840SPBF is a N-CHANNEL FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 32A IDM, 510mJ EAS, and 0.85 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 125W and can withstand up to 150°C.
IRF6215STRLPBF
IRF6215STRLPBF by Infineon Technologies is a P-CHANNEL FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 44A and EAS of 310mJ, with an operating temperature up to 175°C. This SINGLE configuration transistor has 0.29 ohm RDS(on) and can handle a max ID of 13A.
ZVN0545GTA
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 4; JESD-30 Code: R-PDSO-G4; Maximum Drain Current (ID): .14 A;
FDMC86102LZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; No. of Terminals: 5; Peak Reflow Temperature (C): 260;
IRF7410TRPBF
Infineon's IRF7410TRPBF is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 65A IDM, 0.007 ohm RDS(on), and operates in ENHANCEMENT MODE. With GULL WING terminals and SMALL OUTLINE package, it can withstand -55 to 150 °C temperatures.
ATP304-TL-H
The Onsemi ATP304-TL-H is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 400A IDM. Ideal for applications requiring high power dissipation, it features a built-in diode, 0.0089 ohm RDS(on), and operates in enhancement mode. Suitable for surface mount designs with GULL WING terminals, this FET offers 656mJ EAS for robust performance in various electronic systems.
IRF3205ZLPBF
IRF3205ZLPBF by Infineon is a N-CHANNEL Power FET with 55V DS Breakdown Voltage and 440A IDM. Ideal for SWITCHING applications, it features a 0.0065 ohm Drain-Source On Resistance and operates in ENHANCEMENT MODE. With a max power dissipation of 170W, this transistor is designed for high-performance electronic systems.
CSD18540Q5B
Texas Instruments
CSD18540Q5B by Texas Instruments is an N-CHANNEL Power FET with 60V DS Breakdown Voltage and 400A IDM. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with 0.0033 ohm Drain-Source On Resistance. The transistor features a METAL-OXIDE SEMICONDUCTOR technology and can withstand temperatures from -55 to 175 °C.
IRFR120NTRPBF
IRFR120NTRPBF by Infineon Technologies is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 38A Pulsed Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 0.21 ohm On Resistance, and operates in ENHANCEMENT MODE.
NDT452AP
NDT452AP by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage and 5A Drain Current. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating from -65 to 150 °C, it has 0.065 ohm On Resistance and can handle up to 15A Pulsed Drain Current.
IRF7205TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Peak Reflow Temperature (C): 260; JESD-30 Code: R-PDSO-G8;
IRF540PBF
Vishay Intertechnology's IRF540PBF is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 110A IDM, 230mJ EAS, and 0.077 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max power dissipation of 150W and can withstand temperatures up to 175°C.
FQB47P06TM_AM002
Fairchild Semiconductor's FQB47P06TM_AM002 is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 188A IDM, 820mJ EAS, and 0.026 ohm RDS(ON). With a max power dissipation of 160W and operating temperature up to 175°C, it offers reliable performance in various electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PJA3406_R1_00001
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 3; Transistor Element Material: SILICON; Package Body Material: PLASTIC/EPOXY;
PJA3441_R1_00001
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; Package Body Material: PLASTIC/EPOXY; Maximum Drain-Source On Resistance: .088 ohm;
PJA3441-AU_R1_000A1
PJA3441-AU_R1_000A1 by Panjit Int. is a P-CHANNEL FET for SWITCHING apps. Features include 40V DS Breakdown Voltage, 12.4A IDM, and 0.088 ohm RDS(on). Ideal for automotive electronics due to AEC-Q101 compliance and -55 to 150 °C operating range.
PJA3404_R1_00001
PJA3404_R1_00001 by Panjit Int. is a N-CHANNEL FET with 30V DS breakdown voltage, 22A IDM, and 0.03 ohm RDS(on). Ideal for switching applications, it's a single config with built-in diode in small outline package, featuring metal-oxide semiconductor tech and matte tin finish.
PJA3416A_R1_00001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; No. of Terminals: 3; Package Shape: RECTANGULAR;
PJA3404A_R1_00001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Time At Peak Reflow Temperature (s): 40; No. of Terminals: 3;
PJA3416-AU_R1_000A1
Power Field-Effect Transistors; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
PJA3416AE_R1_00001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 6.5 A; Terminal Position: DUAL; Transistor Application: SWITCHING;
PJA3416AE_R2_00001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 40; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
PJA3416A_R2_00001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; No. of Elements: 1; Maximum Time At Peak Reflow Temperature (s): 40;
PJA3416_R1_00001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Transistor Element Material: SILICON; No. of Terminals: 3;
PJA3416_R2_00001
PJA3416_R2_00001 by Panjit Int. is a N-CHANNEL FET with 20V DS breakdown voltage, 5.8A max drain current, and 0.027 ohm on resistance. Ideal for switching applications due to its single configuration with built-in diode and 23.2A pulsed drain current capability in enhancement mode operation.
PJA3471_R1_00001
Power Field-Effect Transistors; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e3;
PJA3441_R2_00001
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: MATTE TIN; JESD-30 Code: R-PDSO-G3; Package Shape: RECTANGULAR;
PJA3402_R1_00001
PJA3402_R1_00001 by Panjit Int. is a N-CHANNEL FET with 30V DS breakdown voltage, 17.6A IDM, and 0.048 ohm max RDS(on). Ideal for switching applications, it features a built-in diode, operates in enhancement mode, and has a peak reflow temp of 260°C.
PJA3409_R1_00001
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; JESD-30 Code: R-PDSO-G3; No. of Terminals: 3;
PJA3415A_R1_00001
PJA3415A_R1_00001 by Panjit Int. is a P-CHANNEL FET with 20V DS Breakdown Voltage, 18A IDM, and 0.046 ohm RDS(on). Ideal for SWITCHING applications due to ENHANCEMENT MODE operation and BUILT-IN DIODE. Features GULL WING terminals in a SMALL OUTLINE package for surface mount assembly.
PJA3435_R1_00001
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Terminal Form: GULL WING; Maximum Drain Current (ID): .5 A;
PJA3440_R1_00001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; Maximum Drain Current (ID): 4.3 A; No. of Elements: 1;
PJA3405_R2_00001
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; Maximum Drain Current (ID): 3.6 A; Maximum Time At Peak Reflow Temperature (s): 40;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved