Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TND027SW-TL-E by Onsemi is an 8-terminal peripheral driver with a max output current of 1.5A, suitable for industrial applications. It operates b/w -40 to 85 °C, featuring a small outline package style and gull wing terminal form for surface mount assembly.
Median Price
$1.245
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.200
1k+ parts
$0.996
10k+ parts
$0.888
DigiKey
$1.500
Verical
$1.110
Digiode
$0.937
Chip Stock
Vyrian
DigiKey Marketplace
$1.030
ACDS - Activité Composants Distribution Service
Corohmni
$0.835
Corphita
$0.887
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
SupplyDigital Components
TANS Electronics
Kepictronics
Continental Prestige Electronics
Metaverse IC Inc.
Kulean Microsystems
Problanco Electronics
UHIMA Technologies
Microchip USA
PLastic/epoxy material provides durability and protection for the internal components of the driver, ensuring a longer lifespan.
Surface mount compatibility allows for easy and convenient installation onto circuit boards, saving space and simplifying assembly.
The high maximum output current of 1.5 A allows for driving power-hungry components without any performance issues.
Industrial temperature grade ensures reliable operation in harsh environmental conditions, making it suitable for a wide range of applications.
Peripheral Drivers TND027SW-TL-E attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Driver No. of Bits:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Sub-Category:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
TND027SW-TL-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
1554216002
Molex
WIRE AND CABLE;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Shenzhen Socay Electronics
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
UDN2981A-T
Allegro MicroSystems
Allegro MicroSystems' UDN2981A-T is an 8-bit peripheral driver with a max output current of 0.35A and nominal voltage of 35V. It features built-in transient protection, operates b/w -20°C to 85°C, and has a turn-on time of 2µs. Ideal for applications requiring source output current flow direction in various electronic systems.
TPS4H000BQPWPRQ1
Texas Instruments
TPS4H000BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal, and under voltage. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver feature.
HCPL-316J#500
Broadcom
HCPL-316J#500 by Broadcom is a Peripheral Driver with 16 terminals, operating voltage range of 4.5V to 5.5V, and built-in protections against over/under voltage. It features a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 2.5A and sink flow direction.
ITS4141NHUMA1
ITS4141NHUMA1 by Infineon Technologies is a Peripheral Driver with 4 terminals, MOS technology, and built-in protections. It operates b/w -30 to 85 °C with a supply voltage range of 12-45 V. Ideal for applications requiring buffer or inverter based peripheral drivers.
NCV8402ASTT3G
NCV8402ASTT3G by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, and thermal conditions. It has a max output peak current limit of 4.8A and a turn-on time of 25us. This IC is commonly used as a buffer or inverter based peripheral driver in various applications.
ULN2003D
Signetics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
VNQ5027AKTR-E
STMicroelectronics
STMicroelectronics' VNQ5027AKTR-E is a 4-function peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 8-36V and has a turn-on/off time of 40us. This CMOS technology-based driver is ideal for applications requiring SOURCE output current flow direction.
IRS2011STRPBF
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX4820EUP+T
Analog Devices
MAX4820EUP+T by Analog Devices is a Peripheral Driver with 20 terminals, operating voltage range of 2.3V to 5.5V, and max output current of 0.15A. It features built-in transient protection and is ideal for industrial applications requiring a buffer or inverter based peripheral driver with sink output current flow direction.
ULN2003AIPWRE4
ULN2003AIPWRE4 by Texas Instruments is a 7-bit buffer/inverter peripheral driver with open-collector output. It features transient protection, sink current flow direction, and bipolar technology. Ideal for applications requiring inverted output polarity in a small outline package with 16 terminals.
FDG6324L
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
PTPS1H200AQDGNRQ1
PTPS1H200AQDGNRQ1 by Texas Instruments is a Peripheral Driver with 8 terminals, operating voltage range of 4-40V, and built-in protections against transient, over current, and thermal issues. It is designed for automotive applications with a small outline package style and AEC-Q100 screening level.
FDC6324L
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
NUD3160DMT1G
NUD3160DMT1G by Onsemi is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It has a max supply voltage of 60 V and output current of 0.15 A. Ideal for automotive applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface ICs.
FPF2108
FPF2108 by Onsemi is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V and max output current of 0.8 A. Ideal for industrial applications requiring a compact form factor and source flow direction.
NCP361MUTBG
NCP361MUTBG by Onsemi is a peripheral driver with 6 terminals and built-in protections against transient, over current, over voltage, thermal, and under voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.2V to 20V. Ideal for industrial applications requiring a buffer or inverter based peripheral driver in a small outline package style.
ADP196ACBZ-01-R7
ADP196ACBZ-01-R7 by Analog Devices is a peripheral driver with a max supply voltage of 5.5V and built-in protections against over current and thermal issues. It is commonly used as a buffer or inverter based peripheral driver for industrial applications.
E-L6201PSTR
STMicroelectronics E-L6201PSTR is a full-bridge peripheral driver with 20 terminals. It operates b/w 12V to 48V, offering built-in thermal protection. Utilized in applications requiring source and sink current flow control, it features BCDMOS technology in a compact rectangular package.
TPS27SA08CQPWPRQ1
TPS27SA08CQPWPRQ1 by Texas Instruments is a peripheral driver with a max supply voltage of 36V, built-in protections for transient, over current, thermal, and under voltage. It is designed for automotive applications with a high side driver feature and can handle a max output current of 10A. The package style is small outline with heat sink/slug and thin profile, making it suitable for compact designs in automotive systems.
VN5050AJTR-E
VN5050AJTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in protections for various faults. It features a small outline package style, dual terminal position, and CMOS technology. Ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TND027SW-TL-2H
Sanyo Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: TIN; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
TND002
Peripheral Drivers; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Qualification: Not Qualified; Terminal Pitch: 2.54 mm; Driver No. of Bits: 1;
TND010F
Peripheral Drivers; Temperature Grade: AUTOMOTIVE; No. of Terminals: 3; Qualification: Not Qualified; Package Equivalence Code: SIP3,.1; Surface Mount: NO;
TND011MP
Peripheral Drivers; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Minimum Operating Temperature: -40 Cel; Terminal Position: SINGLE; Package Body Material: PLASTIC/EPOXY;
TND011NM
Peripheral Drivers; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Qualification: Not Qualified; Surface Mount: NO; Maximum Operating Temperature: 85 Cel;
TND012MP
Peripheral Drivers; Temperature Grade: AUTOMOTIVE; No. of Terminals: 3; Surface Mount: NO; Terminal Position: SINGLE; Maximum Operating Temperature: 150 Cel;
TND017MP
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Shape: ROUND; Terminal Position: BOTTOM;
TND017SW
Peripheral Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TND017SW-TL-E
TND023MP
Peripheral Drivers; Temperature Grade: AUTOMOTIVE; No. of Terminals: 3; Maximum Operating Temperature: 150 Cel; Surface Mount: NO; Package Equivalence Code: SIP3(UNSPEC);
TND027MP
Peripheral Drivers; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Terminal Pitch: 1.27 mm; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
TND027MP-AZ
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: Tin/Copper/Silver/Nickel (Sn/Cu/Ag/Ni);
TND027SW
TND027TD
Peripheral Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
Sanyo Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved