Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMMBTA92LT1G by Onsemi is a PNP BJT transistor with 300V VCEO, 0.5A IC, and 50MHz fT. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and high hFE of 25. Its compact package and surface mount capability make it suitable for space-constrained designs.
Median Price
$0.150
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.059
1k+ parts
$0.030
10k+ parts
-
Newark
$0.368
$0.155
$0.113
Mouser Electronics
$0.380
$0.148
$0.098
Farnell
$0.118
$0.088
$0.078
Element14
$0.202
$0.133
$0.131
Chip1Stop
$0.089
$0.080
$0.052
Verical
Digiode
$0.239
Bristol Electronics
$0.263
Nova Conductors
$0.316
IBS Electronics
$0.107
Chip Stock
Electro Sonic
$0.053
Vyrian
NAC Semi
$0.270
Cyclops Electronics Ltd
Microfarads
Contempo Components LLC
Semicontronic
$0.038
$0.037
Ampacity Inc.
Corohmni
Argo Parts USA
$0.094
$0.091
Modulus Dynamics
$0.104
$0.103
$0.100
Corphita
$0.227
Aranea Global
$0.310
$0.298
Advanced Electronics
$0.518
$0.492
Aztec Data Supply Inc.
$1.187
Kepictronics
Perfect Parts
RC Electronics
$0.090
Eastek
GreenTree Electronics
Infinite Electronics LLP (Excess)
Futuretech Components
Formix International (Excess)
Kulean Microsystems
Continental Prestige Electronics
$0.122
TANS Electronics
iodParts Technologies Inc.
Problanco Electronics
SupplyDigital Components
Robosynatics
Lucentia Tech
$0.897
UHIMA Technologies
Provides durability and protection for the transistor, ensuring a longer lifespan.
Allows for easy integration into circuits that require PNP transistors.
Simplified design for straightforward implementation in electronic circuits.
Facilitates automated assembly processes and saves space on the PCB.
Enables easy placement on the PCB and efficient use of space.
Provides secure solder connections and ease of handling during assembly.
Simplified connection requirements for the transistor.
Suitable for low-power applications, ensuring efficient performance.
Compact package design for space-constrained applications.
Ensures stable amplification of signals in various circuit configurations.
Provides reliability and performance in high-temperature environments.
Suitable for applications requiring higher voltage handling capabilities.
Offers high-performance characteristics and reliability for the transistor.
Supports medium-current applications, versatile for various circuit requirements.
Provides a stable and corrosion-resistant finish for reliable connections.
Facilitates easy PCB layout and connection arrangements.
Ensures proper reflow soldering without damaging the transistor.
Optimal temperature for reflow soldering, ensuring proper solder joints.
Meets automotive industry standards for reliability and quality assurance.
Suitable for high-frequency applications requiring fast signal switching.
Small Signal Bipolar Junction Transistors (BJT) SMMBTA92LT1G attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Element Material:
Nominal Transition Frequency (fT):
SMMBTA92LT1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - SOT23 27/Sep/2016
PCN Assembly/Origin - Mold Compound 10/Nov/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Bkc Semiconductors
Transistor & Electronic
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Comset Semiconductors
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LM7805CT
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
SBC817-40LT1G
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .5 A;
BC547C
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
BC817-25
NPN; Configuration: SINGLE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 150 Cel; No. of Elements: 1;
2N2219A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; JESD-30 Code: O-MBCY-W3;
BC547BTA
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
MMBT2222A
Yangzhou Yangjie Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; Transistor Element Material: SILICON;
2N2222AUB
Semicoa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BC547B
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
MMBT4401LT1G
MMBT4401LT1G by Onsemi is a NPN BJT transistor for switching applications. With a VCEsat of 0.75V, hFE of 40, and IC of 0.6A, it operates at temperatures from -55 to 150°C. Its small outline package with gull wing terminals makes it suitable for surface mount designs.
BC817-40
Lite-on Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Transistor Element Material: SILICON;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; Terminal Position: BOTTOM;
2N3904
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Maximum Turn Off Time (toff): 250 ns;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 420;
Silicon Transistor
Diodes Incorporated
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .33 W; Maximum Collector Current (IC): .5 A;
Kingtronics International
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .5 A;
BC846B-7-F
Diodes Inc. BC846B-7-F is a NPN BJT transistor with hFE of 200, VCE of 65V, and IC of 0.1A. Ideal for switching applications in small outline packages with Gull Wing terminals. Operates b/w -65 to 150°C, meeting AEC-Q101 standards for automotive use.
BC847C
Weitronic Enterprise
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A;
2N2905A
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .6 W; Maximum Collector Current (IC): .6 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
SMMBT2907ALT1G
SMMBT2907ALT1G by Onsemi is a PNP BJT with 3 terminals, max. power dissipation of 0.3W, and max. collector-emitter voltage of 60V. Ideal for small outline applications requiring high DC current gain (hFE) of 100 and operating temperature up to 150°C. Suitable for surface mount designs in automotive electronics due to AEC-Q101 compliance and peak reflow temp of 260°C.
SMMBT3906LT1G
SMMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and IC of 0.2A. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance, 260°C peak reflow temp, and 250MHz fT.
SMMBT4401LT1G
SMMBT4401LT1G by Onsemi is a NPN BJT transistor with 40V VCEO, 0.6A IC, and 250MHz fT. Ideal for switching applications, it comes in a small outline package with GULL WING terminals for surface mount assembly. Operating up to 150°C, it meets AEC-Q101 standards for automotive use.
SMMBTA06LT1G
SMMBTA06LT1G by Onsemi is a NPN BJT transistor with 3 terminals, suitable for amplifier applications. It has a max collector-emitter voltage of 80V and can handle a max collector current of 0.5A. With a min DC current gain of 100, it operates at temperatures up to 150°C.
SMMBT2907ALT3G
SMMBT2907ALT3G by Onsemi is a PNP BJT with 60V VCEO, 0.6A IC, and 200MHz fT. Ideal for small outline applications requiring high DC current gain and fast turn-on/off times. Suitable for automotive electronics due to AEC-Q101 compliance and peak reflow temperature of 260°C.
SMMBT3904LT3G
SMMBT3904LT3G by Onsemi is a NPN BJT with 40V VCEO, 0.2A IC, and 300MHz fT. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and compact SMALL OUTLINE package. With hFE of 30, it offers reliable performance at up to 150°C operating temperature.
SMMBT3904WT1G
SMMBT3904WT1G by Onsemi is a NPN BJT transistor with 3 terminals, hFE of 30, and max. power dissipation of 0.15W. Ideal for amplifier applications, it operates at up to 150°C, with Vce(max) of 40V and fT of 300MHz.
SMMBTA42LT1G
SMMBTA42LT1G by Onsemi is a NPN BJT transistor with 300V VCEO, 0.5A IC, and 50MHz fT. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and 150°C max operating temp.
SMMBTA56LT1G
SMMBTA56LT1G by Onsemi is a PNP BJT transistor with 3 terminals, hFE of 100, and max. power dissipation of 0.3W. Ideal for amplifier applications, it operates at up to 150°C, with VCE of 80V and IC of 0.5A. It comes in a small outline package with matte tin finish and AEC-Q101 reference standard compliance.
SMMBT4403LT1G
SMMBT4403LT1G by Onsemi is a PNP BJT transistor for switching applications. It has a VCEsat of 0.75V, hFE of 100, and IC of 0.6A. With a max operating temperature of 150°C, it is ideal for small outline surface mount designs requiring fast switching speeds up to 200MHz.
SMMBT5401LT1G
SMMBT5401LT1G by Onsemi is a PNP BJT with 3 terminals, max. power dissipation of 0.3W, and max. collector-emitter voltage of 150V. Ideal for small outline packages, it operates at up to 150°C and has a nominal transition frequency of 100MHz, making it suitable for high-speed applications in automotive electronics.
SMMBT2222ALT3G
SMMBT2222ALT3G by Onsemi is a NPN BJT transistor with 40V VCEO, 0.6A IC, and 300MHz fT. Ideal for small signal applications in electronics due to its high DC current gain of 75 (hFE), low power dissipation of 0.3W, and fast turn-on/off times of 35ns/285ns. Its Gull Wing terminals and compact rectangular package make it suitable for surface mount designs.
SMMBT5551LT1G
SMMBT5551LT1G by Onsemi is a small signal NPN bipolar junction transistor (BJT) with a max VCEsat of 0.2V, making it suitable for switching applications. It has a max collector-emitter voltage of 160V and can handle a max collector current of 0.6A. This surface mount transistor is designed for use in automotive electronics (AEC-Q101 standard).
SMMBT3904TT1G
SMMBT3904TT1G by Onsemi is a NPN BJT transistor with 3 terminals, suitable for amplifier applications. It has a max collector-emitter voltage of 40V, max operating temp of 150°C, and min DC current gain of 30. With a package style of small outline and surface mount capability, it offers a transition frequency of 300MHz.
SMMBT3906WT1G
SMMBT3906WT1G by Onsemi is a PNP BJT transistor with hFE of 30, Vce of 40V, and fT of 250MHz. Ideal for amplifier applications due to its small outline package style and surface mount capability.
SMMBTA42LT3G
SMMBTA42LT3G by Onsemi is a NPN BJT with 300V VCEO, 0.5A IC, and 50MHz fT. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and high hFE of 40. Its compact package with GULL WING terminals makes it suitable for surface mount designs.
SMMBT3906LT3G
SMMBT3906LT3G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and VCEO of 40V. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance, it operates b/w -65°C to 150°C with a transition frequency of 250MHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved