Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLP182C51 by Onsemi is a WATER CLEAR lens optoelectronic component with peak wavelength of 700nm. It operates b/w -25 °C to 80°C, emitting red light at 2.4V forward voltage. Ideal for applications requiring precise red light emission in compact spaces.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
Corphita
Corohmni
UHIMA Technologies
TANS Electronics
The peak wavelength of 700nm allows for precise and consistent performance in optoelectronic applications, ensuring accuracy and reliability.
The water clear lens type ensures optimal light transmission, resulting in bright and clear output for the product.
With a high maximum operating temperature of 80 °C, this product can withstand elevated temperatures, making it suitable for a wide range of environments and applications.
The compact height of 6mm allows for easy integration into various devices and systems, making this product versatile and space-efficient.
The low minimum operating temperature of -25 °C ensures reliable performance even in cold conditions, adding to the product's durability and usability.
The red color output at the specified wavelength adds a visual indicator to the product, making it easy to distinguish and monitor during operation.
The low maximum forward voltage of 2.4V helps in reducing power consumption while maintaining efficient performance, making this product cost-effective and energy-efficient.
Other Function Optoelectronics SLP182C51 attributes and parameters. Explore more Other Function Optoelectronics devices from Onsemi
Color At Wavelength:
Maximum Forward Voltage:
Lens Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height:
Peak Wavelength (nm):
Sub-Category:
SLP182C51 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Continental Device India
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Goodwork Semiconductor
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Space Power Electronics
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SLP271E51
SLP271E51 by Onsemi features peak wavelength of 565nm, max operating temp of 80 °C, and min luminous intensity of 0.0007cd. Ideal for applications requiring red light emission with two LEDs in array, such as automotive lighting and signage displays.
SRD00225O
Infineon Technologies
OPTOELECTRONIC DEVICE;
SRP00254G
OPTOELECTRONIC DEVICE; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;
SL2203
SL2203 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common anode configuration, 2 characters, and green color at 14mm display height. With max forward voltage of 2.8V, it operates b/w -25 °C to 70°C, ideal for various optoelectronic applications.
HEDL-5540#A14
Agilent Technologies
OPTOELECTRONIC DEVICE; No. of Functions: 1; Minimum Operating Temperature: 0 Cel; Configuration: SINGLE, 3 CHANNELS; Maximum Operating Temperature: 70 Cel;
SBL52414N
TCST2103
Telefunken Microelectronics
Other Optoelectronics; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -55 Cel; Maximum Response Time: .00001 s; Maximum On State Current: .004 A; Maximum On State Voltage: 70 V;
ELM50603YDL
Bivar
Bivar's ELM50603YDL is a DIFFUSED lens type LED with peak wavelength of 590nm. It has a max forward current of 0.005A and viewing angle of 35°. Ideal for applications requiring yellow light emission, operating b/w -25 to 85 °C temperature range.
S1336-5BK
Hamamatsu Photonics Kk
The Hamamatsu Photonics Kk S1336-5BK is a SINGLE optoelectronic device with a peak wavelength of 960nm. It operates in temperatures ranging from -40 to 100°C and has a reverse breakdown voltage of 5V. Ideal for applications requiring fast response times in the IR range, it features a square shape and THROUGH HOLE MOUNT configuration.
SL1284
SL1284 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. It operates b/w -25 °C to 70°C, emitting Red light at 700nm wavelength. Ideal for applications requiring a compact 2-character display with a 10mm height and max forward voltage of 2.4V.
TIL916
TIL916 by Texas Instruments is a 4-element optoelectronic device with max forward current of 0.05A, power dissipation of 0.15W, and min current transfer ratio of 500%. It offers fast response time of 0.0001s and high isolation voltage of 3500V, suitable for through hole mounting applications in various electronic circuits.
LS5180J
Other Optoelectronics; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .045 A; Peak Wavelength (nm): 590; Maximum Operating Temperature: 100 Cel;
ASSR-V622-502E
Broadcom
ASSR-V622-502E by Broadcom is a COMPLEX optoelectronic device with 2 functions. It operates b/w -40°C to 85°C, featuring matte tin terminal finish. Ideal for applications requiring reliable optoelectronics in various temperature conditions.
LH1262CAC
LH1262CAC by Infineon Technologies is a separate optoelectronic device with 2 elements. It operates in temperatures ranging from -40°C to 100°C, making it suitable for various applications. The terminal finish is Tin/Lead (Sn/Pb), ensuring reliable connections in electronic systems.
VO1263AB
Vishay Intertechnology
VO1263AB by Vishay Intertechnology is a separate optoelectronic device with 2 elements. It operates b/w -40°C to 100°C, featuring matte tin terminal finish. Ideal for applications requiring dual optoelectronic functions in various temperature environments.
D2440
Crydom
The Crydom D2440 is an optoelectronic device with a control current of 0.0034A and back-to-back SCR output circuit type. It operates b/w -30°C to 80°C, suitable for DC input at 3V. With dimensions of 27mm (H) x 57mm (L), it finds application in various electronic control systems.
APV1122AX
OPTOELECTRONIC DEVICE; Minimum Operating Temperature: -40 Cel; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
ACPL-333J-500E
ACPL-333J-500E by Broadcom is a COMPLEX optoelectronic device with 2 elements. It has a max forward current of 0.012A and operates b/w -40 to 105°C. With a max isolation voltage of 3750V, it is ideal for surface mount applications requiring fast response times.
AQY222R1S
AQY222R1S by Panasonic is a SINGLE configuration TRANSISTOR OUTPUT SSR with 0.0005 A control current and 0.05 A max forward current. It operates in temperatures ranging from -40 to 85 °C, making it suitable for DC input applications requiring high isolation voltage of 1500 V.
LSM670-J1
Other Optoelectronics; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLP141B51
Other Optoelectronics; Lens Type: DIFFUSED; Maximum Forward Voltage: 2.4 V; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red; Height: 8.2 mm;
SLP152B90
Other Optoelectronics; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red; Peak Wavelength (nm): 700; Maximum Forward Voltage: 2.4 V; Minimum Luminous Intensity: .0003 cd;
SLP154B51
Other Optoelectronics; Lens Type: DIFFUSED; Height: 9.3 mm; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red; Peak Wavelength (nm): 700;
SLP156B51
Other Optoelectronics; Lens Type: DIFFUSED; Maximum Forward Voltage: 2.4 V; Peak Wavelength (nm): 700; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red;
SLP166B90
Other Optoelectronics; Maximum Forward Voltage: 2.4 V; No. of LEDs in Array: 5; Minimum Luminous Intensity: .00025 cd; Peak Wavelength (nm): 700; Color At Wavelength: Red;
SLP167B90
Other Optoelectronics; Minimum Operating Temperature: -25 Cel; Minimum Luminous Intensity: .00011 cd; No. of LEDs in Array: 5; Peak Wavelength (nm): 700; Color At Wavelength: Red;
SLP169B90
Other Optoelectronics; No. of LEDs in Array: 5; Peak Wavelength (nm): 700; Maximum Forward Voltage: 2.4 V; Minimum Operating Temperature: -25 Cel; Minimum Luminous Intensity: .0003 cd;
SLP171E51
Other Optoelectronics; Peak Wavelength (nm): 700; Minimum Operating Temperature: -25 Cel; Minimum Luminous Intensity: .0006 cd; Maximum Forward Voltage: 2.4 V; No. of LEDs in Array: 2;
SLP172B90
Other Optoelectronics; Minimum Luminous Intensity: .0003 cd; Color At Wavelength: Red; No. of LEDs in Array: 5; Maximum Forward Voltage: 2.4 V; Minimum Operating Temperature: -25 Cel;
Sanyo Electric
Other Optoelectronics; Peak Wavelength (nm): 700; Minimum Luminous Intensity: .0003 cd; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red; No. of LEDs in Array: 5;
Other Optoelectronics; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red; Minimum Luminous Intensity: .00025 cd; Minimum Operating Temperature: -25 Cel; Maximum Forward Voltage: 2.4 V;
Other Optoelectronics; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 80 Cel; Peak Wavelength (nm): 700; Minimum Luminous Intensity: .00011 cd; Color At Wavelength: Red;
Other Optoelectronics; Minimum Luminous Intensity: .0003 cd; Maximum Forward Voltage: 2.4 V; No. of LEDs in Array: 5; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -25 Cel;
Other Optoelectronics; Maximum Forward Voltage: 2.4 V; Minimum Luminous Intensity: .0006 cd; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red; Maximum Operating Temperature: 80 Cel;
Other Optoelectronics; Minimum Luminous Intensity: .0003 cd; Maximum Forward Voltage: 2.4 V; No. of LEDs in Array: 5; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 80 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved