Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLP171E51 by Onsemi features peak wavelength of 700nm, max operating temp of 80 °C, and min luminous intensity of 0.0006cd. Ideal for applications requiring red light emission with two LEDs in array, such as automotive lighting systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Kulean Microsystems
TANS Electronics
Problanco Electronics
SupplyDigital Components
Corphita
UHIMA Technologies
Corohmni
The peak wavelength of 700nm ensures that the product emits red light, making it suitable for applications where red light is desired.
With a maximum operating temperature of 80 °C, this product can withstand higher temperatures without compromising performance, making it reliable in various environments.
The minimum operating temperature of -25 °C allows this product to function effectively in colder conditions, making it versatile for use in different climates.
The minimum luminous intensity of 0.0006 cd ensures a sufficient level of brightness for the application, providing adequate visibility in low-light settings.
The red color emission at the specified wavelength adds to the product's versatility, as red is a commonly used color in various signaling and illumination applications.
Having two LEDs in the array provides redundancy and increases the overall brightness output, making the product more reliable and suitable for applications requiring higher light intensity.
The maximum forward voltage of 2.4V allows for efficient operation while maintaining power consumption within acceptable limits, making it energy-efficient and cost-effective.
Other Function Optoelectronics SLP171E51 attributes and parameters. Explore more Other Function Optoelectronics devices from Onsemi
Color At Wavelength:
Maximum Forward Voltage:
Minimum Luminous Intensity:
No. of LEDs in Array:
Maximum Operating Temperature:
Minimum Operating Temperature:
Peak Wavelength (nm):
Sub-Category:
SLP171E51 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
LM317T/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LATBT676Q2+Q2+K2
Other Optoelectronics; Lens Type: CLEAR; Maximum Operating Temperature: 100 Cel; Peak Wavelength (nm): 622; Maximum Forward Current: .03 A; Maximum Reverse Voltage: 5 V;
SFH3500FA-4
Other Optoelectronics; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .05 A;
VTT9002H
Excelitas Technologies
VTT9002H by Excelitas Technologies is an optoelectronic component with a max operating temp of 70°C and min operating temp of -20°C. It features a max power dissipation of 0.1W and max response time of 4μs. Ideal for applications requiring through hole mounting, with a max on state current of 25mA.
MICRORD-10035-MLP-TR1
Other Optoelectronics;
PSD304R-20XM
Other Optoelectronics; Terminal Finish: TIN LEAD; JESD-609 Code: e0;
PVI1050NSPBF
OPTOELECTRONIC DEVICE; Configuration: SEPARATE, 2 ELEMENTS; Minimum Operating Temperature: -40 Cel; No. of Functions: 2; Maximum Operating Temperature: 85 Cel;
V23845-A4621
OPTOELECTRONIC DEVICE;
SPI206-10
SPI206-10 by Onsemi is a 20V Transistor with 0.00003s response time. Operating temp range: -25 to 85 °C. Ideal for optoelectronic applications requiring THROUGH HOLE MOUNT and 3mm gap size.
SL2204-20
SL2204-20 by Onsemi is a Common Cathode LED with peak wavelength of 565nm. It operates b/w -25 °C to 70°C, ideal for applications requiring green light display with 14mm height.
SD3421-002
Micro Switch
PIN PHOTODIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Dark Current: 20 nA; Semiconductor Material: Silicon; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel;
IRM3005
OPTOELECTRONIC DEVICE; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; No. of Functions: 1;
SBL52414N
MSD2313TXV
Other Optoelectronics; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Minimum Operating Temperature: -55 Cel; Configuration: N/A; Maximum Operating Temperature: 100 Cel;
MICRORD-10010-MLP-TR-E
NL3224BC35-20
Renesas Electronics
TCST1103
Telefunken Microelectronics
Other Optoelectronics; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum On State Voltage: 70 V; Maximum Response Time: .00001 s; Gap Size: 3.1 mm;
PSD302-15LM
NSL-32SR2S
Silonex
NSSW100DT
Nichia
NSSW100DT by Nichia is a white LED with 3.5V forward voltage and 5V reverse voltage, suitable for optoelectronic applications. It operates b/w -30°C to 85°C, with a max current of 0.035A. This LED has a height of 1.2mm and gold terminal finish, packed in TR, EMBOSSED, 7 INCH format.
TIL915
Texas Instruments
TIL915 by Texas Instruments is a 2-element optoelectronic device with max forward current of 0.05A, power dissipation of 0.15W, and min current transfer ratio of 500%. It offers fast response time of 0.0001s and high isolation voltage of 3500V, suitable for through-hole mounting applications in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLP141B51
Other Optoelectronics; Lens Type: DIFFUSED; Maximum Forward Voltage: 2.4 V; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red; Height: 8.2 mm;
SLP152B90
Other Optoelectronics; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red; Peak Wavelength (nm): 700; Maximum Forward Voltage: 2.4 V; Minimum Luminous Intensity: .0003 cd;
SLP154B51
Other Optoelectronics; Lens Type: DIFFUSED; Height: 9.3 mm; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red; Peak Wavelength (nm): 700;
SLP156B51
Other Optoelectronics; Lens Type: DIFFUSED; Maximum Forward Voltage: 2.4 V; Peak Wavelength (nm): 700; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red;
SLP166B90
Other Optoelectronics; Maximum Forward Voltage: 2.4 V; No. of LEDs in Array: 5; Minimum Luminous Intensity: .00025 cd; Peak Wavelength (nm): 700; Color At Wavelength: Red;
SLP167B90
Other Optoelectronics; Minimum Operating Temperature: -25 Cel; Minimum Luminous Intensity: .00011 cd; No. of LEDs in Array: 5; Peak Wavelength (nm): 700; Color At Wavelength: Red;
SLP169B90
Other Optoelectronics; No. of LEDs in Array: 5; Peak Wavelength (nm): 700; Maximum Forward Voltage: 2.4 V; Minimum Operating Temperature: -25 Cel; Minimum Luminous Intensity: .0003 cd;
SLP172B90
Other Optoelectronics; Minimum Luminous Intensity: .0003 cd; Color At Wavelength: Red; No. of LEDs in Array: 5; Maximum Forward Voltage: 2.4 V; Minimum Operating Temperature: -25 Cel;
SLP182C51
Other Optoelectronics; Lens Type: WATER CLEAR; Peak Wavelength (nm): 700; Color At Wavelength: Red; Minimum Operating Temperature: -25 Cel; Height: 6 mm;
Sanyo Electric
Other Optoelectronics; Peak Wavelength (nm): 700; Minimum Luminous Intensity: .0003 cd; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red; No. of LEDs in Array: 5;
Other Optoelectronics; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red; Minimum Luminous Intensity: .00025 cd; Minimum Operating Temperature: -25 Cel; Maximum Forward Voltage: 2.4 V;
Other Optoelectronics; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 80 Cel; Peak Wavelength (nm): 700; Minimum Luminous Intensity: .00011 cd; Color At Wavelength: Red;
Other Optoelectronics; Minimum Luminous Intensity: .0003 cd; Maximum Forward Voltage: 2.4 V; No. of LEDs in Array: 5; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -25 Cel;
SLP171E51
Other Optoelectronics; Maximum Forward Voltage: 2.4 V; Minimum Luminous Intensity: .0006 cd; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red; Maximum Operating Temperature: 80 Cel;
Other Optoelectronics; Minimum Luminous Intensity: .0003 cd; Maximum Forward Voltage: 2.4 V; No. of LEDs in Array: 5; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 80 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved