Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SL2283-22 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common anode configuration, 2 characters, and green color at 10mm display height. With max forward voltage of 2.8V, it operates b/w -25 °C to 70°C, ideal for digital displays in various applications.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Problanco Electronics
SupplyDigital Components
TANS Electronics
Corphita
Kulean Microsystems
Corohmni
UHIMA Technologies
Common Anode configuration simplifies the wiring and connection process, making this product easy to integrate into electronic circuits.
The peak wavelength of 565 nm ensures a vibrant and eye-catching green display that is easily visible in various lighting conditions.
The 7 segment numeric LED display design allows for clear and concise display of numeric characters, making it suitable for numerical applications.
The high maximum operating temperature of 70 °C ensures longevity and reliability even in demanding environmental conditions.
The low minimum operating temperature of -25 °C allows for use in a wide range of temperature environments without compromising performance.
The 2 character display provides enough flexibility for displaying basic alphanumeric information, making it suitable for many applications.
The green color emission at the specified wavelength provides a visually appealing display that is easy to read and distinguish.
The 10 mm display height offers a clear and easily readable display, making it suitable for applications where visibility is crucial.
The low maximum forward voltage requirement of 2.8 V helps in reducing power consumption and extending the overall lifespan of the product.
Other Function Optoelectronics SL2283-22 attributes and parameters. Explore more Other Function Optoelectronics devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Voltage:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SL2283-22 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
NXP Semiconductors
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Multicomp Pro
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
ACPL-333J-000E
Broadcom
ACPL-333J-000E by Broadcom is a COMPLEX optoelectronic device with 0.012A forward current, 250ns response time, and 3750V isolation voltage. Ideal for surface mount applications in temperature range of -40 to 105°C, it operates at nominal 30V supply voltage.
SLP266B90
SLP266B90 by Onsemi is a green LED array with 5 LEDs, peak wavelength of 565nm, and max forward voltage of 2.8V. Ideal for applications requiring low luminous intensity from -25 °C to 80°C operating temperature range.
621-2
Teledyne Technologies
Teledyne Technologies' 621-2 is an optoelectronic device with a Triac output circuit type, operating at -40 to 80°C. It has a control current of 0.02A and requires a 12V DC input. This component, measuring 71mm in length and 30mm in height, finds application in various electronic control systems.
SL2255
SL2255 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common anode configuration, display height of 10mm, and operates b/w -25 °C to 70°C. Ideal for applications requiring green color at 2.8V forward voltage in limited character displays.
ELM55503GD
Bivar
Bivar's ELM55503GD is a DIFFUSED green LED with peak wavelength of 568nm, forward current of 0.03A, and max forward voltage of 2.8V. Ideal for applications requiring a viewing angle of 35°, it operates b/w -25 to 85°C and can handle up to 5V reverse voltage.
SBL52413DC
Infineon Technologies
OPTOELECTRONIC DEVICE;
4203
Standish L C D
SEVEN SEGMENT NUMERIC; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;
ELM50603HDL
Bivar's ELM50603HDL optoelectronic component has a peak wavelength of 625nm, diffused lens type, and max forward current of 0.005A. Ideal for applications requiring orange light emission with a viewing angle of 35°, operating b/w -25°C to 85°C.
SL2180-20
SL2180-20 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common cathode configuration, green color at wavelength, and display height of 8mm. Ideal for applications requiring temp range from -25 °C to 70°C.
HLMP1503
Cml Technologies & Kg
HLMP1503 by Cml Technologies & Kg is a DIFFUSED lens type LED with peak wavelength of 565nm. It has max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring green light emission in temp range -55 to 100°C.
SLP989C51
SLP989C51 by Onsemi is a WATER CLEAR LED with peak wavelength of 630nm. It operates b/w -25 °C to 80°C, with max forward voltage of 2.8V. Ideal for applications requiring red light emission in compact spaces.
IL300-DEFG-X009T
Vishay Intertechnology
Vishay Intertechnology's IL300-DEFG-X009T is a DUAL optocoupler with 0.06A forward current, 5300V isolation voltage, and -55 to 100°C operating temperature range. Ideal for applications requiring simultaneous operation in surface mount configurations.
C30659-1550E-R08BH
Excelitas Technologies
PVI1050NS-TPBF
International Rectifier
OPTOELECTRONIC DEVICE; Maximum Operating Temperature: 85 Cel; No. of Functions: 2; Minimum Operating Temperature: -40 Cel; Configuration: SEPARATE, 2 ELEMENTS;
SRP00264W
OPTOELECTRONIC DEVICE; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;
LR600240D40
Other Optoelectronics; Input Type: DC; Maximum Operating Temperature: 125 Cel; Output Circuit Type: SCR; Control Current: .015 A; Control Voltage: 24 V;
SL2263-20
SL2263-20 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common anode configuration, operates b/w -20 °C to 75°C, and displays green color at 14mm height. Ideal for applications requiring compact numeric display with clear visibility in various temperature conditions.
4209
Other Optoelectronics;
SL1286
SL1286 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 700nm. It has common cathode configuration, operates b/w -25 °C to 70°C, and displays red color at 14mm height. Ideal for applications requiring compact numeric display with clear visibility in various temperature conditions.
LHT676-P2
Other Optoelectronics; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Viewing Angle: 120 deg; Maximum Forward Voltage: 2.3 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SL2284-20
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Maximum Forward Voltage: 2.8 V; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Green; Display Height: 10 mm;
SL2264-20
7 SEG NUMERIC LED DISPLAY; No. of Characters: 2; Color At Wavelength: Green; Maximum Operating Temperature: 75 Cel; Peak Wavelength (nm): 565; Minimum Operating Temperature: -20 Cel;
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Green; Minimum Operating Temperature: -25 Cel; Configuration: Common Anode; Display Height: 10 mm; Maximum Forward Voltage: 2.8 V;
SL2275-20
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Display Height: 8 mm; Minimum Operating Temperature: -25 Cel; Configuration: Common Anode; No. of Characters: 2;
SL2263-22
7 SEG NUMERIC LED DISPLAY; Configuration: Common Anode; No. of Characters: 2; Maximum Operating Temperature: 75 Cel; Color At Wavelength: Green; Display Height: 14 mm;
SL2284-22
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 565; Configuration: Common Cathode; Maximum Forward Voltage: 2.8 V; Color At Wavelength: Green; Maximum Operating Temperature: 70 Cel;
SL2203-20
Other Optoelectronics; Peak Wavelength (nm): 565; Configuration: Common Anode; Display Height: 14 mm; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 70 Cel;
SL2264-22
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 565; Color At Wavelength: Green; No. of Characters: 2; Minimum Operating Temperature: -20 Cel; Configuration: Common Cathode;
SL2256
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Display Height: 10 mm; Peak Wavelength (nm): 565; Configuration: Common Cathode; Color At Wavelength: Green;
SL2283-20
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 565; Maximum Operating Temperature: 70 Cel; Maximum Forward Voltage: 2.8 V; No. of Characters: 2; Configuration: Common Anode;
SL2276-20
7 SEG NUMERIC LED DISPLAY; Configuration: Common Cathode; Peak Wavelength (nm): 565; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Display Height: 8 mm;
7 SEG NUMERIC LED DISPLAY; Display Height: 14 mm; Minimum Operating Temperature: -20 Cel; No. of Characters: 2; Maximum Operating Temperature: 75 Cel; Color At Wavelength: Green;
SL2284
7 SEG NUMERIC LED DISPLAY; Display Height: 10 mm; Color At Wavelength: Green; Maximum Forward Voltage: 2.8 V; No. of Characters: 2; Peak Wavelength (nm): 565;
SL2204-20
Other Optoelectronics; Peak Wavelength (nm): 565; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -25 Cel; No. of Characters: 2; Color At Wavelength: Green;
SL2264
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 565; Configuration: Common Cathode; Color At Wavelength: Green; Maximum Operating Temperature: 75 Cel; Minimum Operating Temperature: -20 Cel;
SL2203
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -25 Cel; Maximum Forward Voltage: 2.8 V; Display Height: 14 mm; Peak Wavelength (nm): 565; Configuration: Common Anode;
SL2204
7 SEG NUMERIC LED DISPLAY; Maximum Forward Voltage: 2.8 V; Minimum Operating Temperature: -25 Cel; Peak Wavelength (nm): 565; Display Height: 14 mm; Configuration: Common Cathode;
SL2263
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 75 Cel; Configuration: Common Anode; Display Height: 14 mm; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 565;
SL2283
7 SEG NUMERIC LED DISPLAY; Display Height: 10 mm; Peak Wavelength (nm): 565; Maximum Operating Temperature: 70 Cel; No. of Characters: 2; Configuration: Common Anode;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved