Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SL2255 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common anode configuration, display height of 10mm, and operates b/w -25 °C to 70°C. Ideal for applications requiring green color at 2.8V forward voltage in limited character displays.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Corphita
Corohmni
UHIMA Technologies
Common anode configuration allows for easy interfacing with standard electronic circuits, making this product compatible with a wide range of applications.
The peak wavelength of 565 nm ensures a bright and vibrant green display, making it easily visible even in well-lit environments.
The 7 segment numeric LED display format allows for clear and concise numerical information to be displayed, making it ideal for various numerical applications.
With a maximum operating temperature of 70 °C, this product can withstand high heat environments without compromising performance or reliability.
The minimum operating temperature of -25 °C ensures that this product can also function effectively in colder environments, providing versatility in its usage.
Having 2 characters allows for displaying a wide range of numbers or information, making it suitable for applications requiring dual numerical displays.
The green color at the specified wavelength gives a visually appealing display that is easy on the eyes, making it suitable for extended viewing periods.
The 10 mm height of the display ensures clear visibility from a distance, making it suitable for applications where readability from afar is essential.
The low maximum forward voltage requirement of 2.8 V ensures energy efficiency and cost-effectiveness in operating this product, making it an economical choice.
Other Function Optoelectronics SL2255 attributes and parameters. Explore more Other Function Optoelectronics devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Voltage:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SL2255 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
RC0805FR-0710RL
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LOL896-Q1R2-1
Infineon Technologies
Other Optoelectronics; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.4 V; Maximum Reverse Voltage: 3 V; Minimum Operating Temperature: -40 Cel;
SRP00255H
OPTOELECTRONIC DEVICE; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;
TC243-20
Texas Instruments
Other Optoelectronics;
OACM-U
TE Connectivity
TE Connectivity's OACM-U is a 10.3mm deep optoelectronic device with Triac output circuit, operating at -30 to 80 °C. It has a control current of 0.044 A, control voltage of 3 V, and max supply voltage of 15 V. Ideal for panel mounting applications, it offers a max output voltage of 280 V and nominal voltage of 5 V.
SRP00265N
LBL89S-L1M2-1
Other Optoelectronics; Lens Type: WATER DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .015 A; Viewing Angle: 160 deg; Peak Wavelength (nm): 465;
SBM81314NSC
OPTOELECTRONIC DEVICE;
TIL913B
TIL913B by Texas Instruments features 0.05A max forward current, 100% min current transfer ratio, and 3500V max isolation voltage. Ideal for optoelectronic applications with THROUGH HOLE MOUNT feature, it offers fast response time of 0.000015s and low forward voltage of 1.4V.
AMIS-734512
AMIS-734512 by Onsemi is a SINGLE optoelectronic device with 12.8mm size, emitting Amber light at peak wavelength of 600nm. It has low dark current of 200nA, making it ideal for applications requiring precise light emission in compact spaces.
TLP190B(F)
Toshiba
Toshiba TLP190B(F) is a single optoelectronic device with 4 terminals. It operates b/w -40°C to 85°C, making it suitable for various applications. With surface mount feature, it offers reliable performance in different electronic systems.
SPI216
SPI216 by Onsemi is a Transistor with 20V max on-state voltage, 0.006A max on-state current, and 0.00003s response time. Ideal for optoelectronic applications requiring THROUGH HOLE MOUNT with -25 to 80 °C operating temperature range and 4mm gap size.
621-2
Teledyne Technologies
Teledyne Technologies' 621-2 is an optoelectronic device with a Triac output circuit type, operating at -40 to 80°C. It has a control current of 0.02A and requires a 12V DC input. This component, measuring 71mm in length and 30mm in height, finds application in various electronic control systems.
SBM52214NPC
H21B6
Intersil
Other Optoelectronics; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Output Circuit Type: Darlington; Maximum Response Time: .000045 s;
SL2180-20
SL2180-20 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common cathode configuration, green color at wavelength, and display height of 8mm. Ideal for applications requiring temp range from -25 °C to 70°C.
SRP00244O
HEDL-5540#A06
Broadcom
OPTOELECTRONIC DEVICE; Configuration: SINGLE, 3 CHANNELS; Minimum Operating Temperature: 0 Cel; No. of Functions: 1; Maximum Operating Temperature: 70 Cel;
4264
Standish L C D
TLP3906(TPL,E
SBM82314N
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SL2284-20
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Maximum Forward Voltage: 2.8 V; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Green; Display Height: 10 mm;
SL2264-20
7 SEG NUMERIC LED DISPLAY; No. of Characters: 2; Color At Wavelength: Green; Maximum Operating Temperature: 75 Cel; Peak Wavelength (nm): 565; Minimum Operating Temperature: -20 Cel;
SL2283-22
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Color At Wavelength: Green; Display Height: 10 mm; Peak Wavelength (nm): 565; Maximum Forward Voltage: 2.8 V;
SL2275-20
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Display Height: 8 mm; Minimum Operating Temperature: -25 Cel; Configuration: Common Anode; No. of Characters: 2;
SL2263-22
7 SEG NUMERIC LED DISPLAY; Configuration: Common Anode; No. of Characters: 2; Maximum Operating Temperature: 75 Cel; Color At Wavelength: Green; Display Height: 14 mm;
SL2284-22
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 565; Configuration: Common Cathode; Maximum Forward Voltage: 2.8 V; Color At Wavelength: Green; Maximum Operating Temperature: 70 Cel;
SL2203-20
Other Optoelectronics; Peak Wavelength (nm): 565; Configuration: Common Anode; Display Height: 14 mm; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 70 Cel;
SL2264-22
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 565; Color At Wavelength: Green; No. of Characters: 2; Minimum Operating Temperature: -20 Cel; Configuration: Common Cathode;
SL2256
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Display Height: 10 mm; Peak Wavelength (nm): 565; Configuration: Common Cathode; Color At Wavelength: Green;
SL2283-20
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 565; Maximum Operating Temperature: 70 Cel; Maximum Forward Voltage: 2.8 V; No. of Characters: 2; Configuration: Common Anode;
SL2276-20
7 SEG NUMERIC LED DISPLAY; Configuration: Common Cathode; Peak Wavelength (nm): 565; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Display Height: 8 mm;
SL2263-20
7 SEG NUMERIC LED DISPLAY; Display Height: 14 mm; Minimum Operating Temperature: -20 Cel; No. of Characters: 2; Maximum Operating Temperature: 75 Cel; Color At Wavelength: Green;
SL2284
7 SEG NUMERIC LED DISPLAY; Display Height: 10 mm; Color At Wavelength: Green; Maximum Forward Voltage: 2.8 V; No. of Characters: 2; Peak Wavelength (nm): 565;
SL2204-20
Other Optoelectronics; Peak Wavelength (nm): 565; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -25 Cel; No. of Characters: 2; Color At Wavelength: Green;
SL2264
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 565; Configuration: Common Cathode; Color At Wavelength: Green; Maximum Operating Temperature: 75 Cel; Minimum Operating Temperature: -20 Cel;
SL2203
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -25 Cel; Maximum Forward Voltage: 2.8 V; Display Height: 14 mm; Peak Wavelength (nm): 565; Configuration: Common Anode;
SL2204
7 SEG NUMERIC LED DISPLAY; Maximum Forward Voltage: 2.8 V; Minimum Operating Temperature: -25 Cel; Peak Wavelength (nm): 565; Display Height: 14 mm; Configuration: Common Cathode;
SL2263
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 75 Cel; Configuration: Common Anode; Display Height: 14 mm; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 565;
SL2283
7 SEG NUMERIC LED DISPLAY; Display Height: 10 mm; Peak Wavelength (nm): 565; Maximum Operating Temperature: 70 Cel; No. of Characters: 2; Configuration: Common Anode;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved